Mechanical engineering topic list of research papers
-
Research on an Axial Flux PMSM with Radially Sliding Permanent Magnets2015 / Jing Zhao, Bin Li, Zhongxin Gu
-
Product Remanufacturability Assessment based on Design Information
Abstract Existing studies on CAD-based remanufacturability assessment are either based on design charts or consideration of simple embodiment design features only. This paper presents a remanufacturability assessment model based on design...
2014 / H.C. Fang, S.K. Ong, A.Y.C. Nee -
Remaining Useful Life Assessment and its Application in the Decision for Remanufacturing
Abstract Remaining useful life (RUL) of a mechanical device or equipment is the lifetime from current time to the time that the device fails. Remaining useful life modelling and online assessment provide the timely message for system decision making ...
2014 / Yawei Hu, Shujie Liu, Huitian Lu, Hongchao Zhang -
Mental Strain as Field of Action in the 4th Industrial Revolution
Abstract Industrial revolutions have changed the society by a development of key-technologies. The vision of the 4th industrial revolution is triggered by technological concepts and solutions to realize a combination of the economy of scale with the ...
2014 / Uwe Dombrowski, Tobias Wagner -
Research on optical fiber flow test method with non-intrusion2014 / Ying Shang, Xiaohui Liu, Chang Wang, Wenan Zhao
-
Driving Simulation Study on Speed-change Lanes of the Multi-lane Freeway Interchange
Abstract Because of the interactions of the multi-lane freeway mainline, upstream, downstream, the diversity of environmental conditions, as well as the complexity of geometric configuration, speed-change lanes of the multi-lane freeway interchange...
2013 / Zhongyin Guo, Haifeng Wan, Yi Zhao, Haocheng Wang, Zhenjiang Li -
Studies and Applications of Three Kinds of Calculation Methods by Describing Damage Evolving Behaviors for Elastic-Plastic Materials
Abstract By means of bidirectional combined coordinate system, three kinds of calculation methods are proposed with respect to the damage evolving rate and the life of elasticplastic material, which include the singleparameter method, the ratio...
2011 / Yan-gui YU, Xi-ang LIU -
Interval Analysis Method on the Buckling of Composite Laminate
Abstract A method named interval analysis method, which solves the buckling load of composite laminate with uncertainties, is presented. Based on interval mathematics and Taylor series expansion, the interval analysis method is used to deal with...
2011 / Zhi-ping QIU, Fei LI, Jia-ling YANG -
The Public Transportation System of High Quality in Taiwan
Abstract In recent years, Taiwan pays more and more attention to the development of the public transportation. In order to encourage people to use the public transportation, perfect service facilities are built and a series of management policies...
2013 / Yuqian Shi, Xiaoguang Yang -
The Mathematical Model of Generating Kinematic for the Worm Face Gear with Modified Geometry
Abstract This paper aims to present the mathematical model for the generating kinematic and numerical simulation of worm face gear with simplified geometry. Through simplification we mean that the thread or the tooth profile is trapezoidal in cross...
2014 / Claudiu-Ioan Boantă, Vasile Boloş -
Field Test Results from Combined Solar Thermal and Air-source Heat Pump Systems with a Special Focus on Defrosting
Abstract Three different combined solar thermal and air-source heat pump systems for domestic hot water preparation and space heating in single- and multi-family houses in Germany have been monitored since the beginning of 2012. Through these field...
2014 / Sven Stark, Anja Loose, Harald Drück -
Damage Evaluation Based on a Wave Energy Flow Map Using Multiple PZT Sensors2014 / Yaolu Liu, Ning Hu, Hong Xu, Weifeng Yuan, Cheng Yan, et al.
-
Thermo-Economic Evaluation of Organic Rankine Cycles for Geothermal Power Generation Using Zeotropic Mixtures2015 / Florian Heberle, Dieter Brüggemann
-
The physics of badminton2015 / Caroline Cohen, Baptiste Darbois Texier, David Quéré, Christophe Clanet
-
Entropy Generation through a Deterministic Boundary-Layer Structure in Warm Dense Plasma2014 / LaVar Isaacson
-
Effect of vitrified bond microstructure and volume fraction in the grinding wheel on traverse internal cylindrical grinding of Inconel® alloy 6002015 / Krzysztof Nadolny, Daniela Herman
-
Conceptual Design for Electromagnetic Guided Rotary Table in Machine Tools
Abstract Difficult-to-machine materials are still challenging the production industry. Examples are highly complex components of aircraft engines. Alongside innovative processes, also improved machine tool components are helping to comply with the...
2014 / B. Denkena, D. Dahlmann, F. Floeter, T. Bruehne -
Extrinsics Autocalibration for Dense Planar Visual Odometry2014 / Jacek Zienkiewicz, Andrew Davison
-
Vehicle speed prediction via a sliding-window time series analysis and an evolutionary least learning machine: A case study on San Francisco urban roads
Abstract The main goal of the current study is to take advantage of advanced numerical and intelligent tools to predict the speed of a vehicle using time series. It is clear that the uncertainty caused by temporal behavior of the driver as well as...
2014 / Ladan Mozaffari, Ahmad Mozaffari, Nasser L. Azad -
Longitudinal dynamics and energy analysis for heavy haul trains2014 / Qing Wu, Shihui Luo, Colin Cole