Mechanical engineering topic list of research papers
-
Influence of Search Algorithms on Aerodynamic Design Optimisation of Aircraft Wings
Abstract The Method of search algorithms or optimisation algorithms is one of the most important parameters which will strongly influence the fidelity of the solution during an aerodynamic shape optimisation problem. Nowadays various optimisation...
2012 / R. Mukesh, R. Pandiyarajan, U. Selvakumar, K. Lingadurai -
From Autorotation to Safe Landing
Abstract Autorotation landing is a special manoeuvre for helicopter when the engine failed. In this situation, it requires the pilot's accurate management, correct judgment and decision on time to enter into steady autorotation. After entry into...
2011 / Quan Jingze -
Numerical Simulation of 3-D Flow Field of Spillway based on VOF Method
Abstract The desired outcome of flow characteristics from the model testing on spillway design process often can not be measured on the specific situation, but it is possible to obtain much of this information through numerical modeling. The flow...
2012 / MU Zhenwei, Zhang Zhiyan, ZHAO Tao -
Effects of Targeted Minimum Quantity Fluid (MQF) Application on Surface Integrity
Abstract A superior quality of subsurface is essential for the component's (machined) performance as well as its sustainability. One of the main reasons for a poor subsurface generated in machining is attributed to high machining temperatures. This...
2013 / C.S. Rakurty, P.I. Varela, A.K. Balaji -
An FEM Analysis with Experimental Validation to Study the Hardness of In-Process Cryogenically Cooled Drilled Holes in Mg AZ31b
Abstract The goal of a number of many recent studies is to assess the potential of cryogenic cooling in improving the sustainability of manufacturing processes. One prime interest is the enhancement of surface integrity properties of newly machined...
2013 / A.H. Kheireddine, A.H. Ammouri, T. Lu, I.S. Jawahir, R.F. Hamade -
Incipient sediment transport for non-cohesive landforms by the discrete element method (DEM)
Abstract We introduce a numerical method for incipient sediment transport past bedforms. The approach is based on the discrete element method (DEM) [1], simulating the micro-mechanics of the landform as an aggregate of rigid spheres interacting by...
2013 / R. Bravo, P. Ortiz, J.L. Pérez-Aparicio -
Online Evaluation Method of Machining Precision Based on Built in Signal Testing Technology
Abstract Online machining precision evaluation is of great significance for lowering manufacturing cost and improving manufacturing efficiency. The open numerical controller provides an opportunity to access the signals of servo drivers during the...
2012 / F. Zhao, X. Mei, Z. Du, T. Tao, G. Jiang -
Friction Variances of Linear Machine Tool Axes
Abstract Friction and damping have a wide influence on machine tools’ dynamics. The statistical spread of identical machine tools’ friction and components’ influence on it are marginally known. In order to reduce this lack of knowledge, measurements ...
2012 / Matthias Reuss, Alexandru Dadalau, Alexander Verl -
Anti-disturbance Control For an Underwater Vehicle In Shallow Wavy Water
Abstract Attitude Control for an underwater vehicle working in shallow wavy water is an important capability. In shallow water this mission most likely will be disturbed by the large surge induced hydrodynamic forces acting on the underwater...
2011 / Jun Luo, Zhijie Tang, Yan Peng, Shaorong Xie, Tingting Cheng, et al. -
Study of Active Vibration Contro1 for Fiber Smart Beam
Abstract Aiming at the problem that resonance phenomenon of materials have harmful effects for stability and precision of system, Fiber Bragg Grating (FBG) was used as sensors and piezoelectric ceramics as actuators to study the active vibration...
2011 / Zhang Li, Ding Shao-jie, Xie Yi, Xu Ya-min, Yuan Qiao-ling, et al. -
Effect of Exhaust Gas Recirculation (EGR) on Performance and Emission characteristics of a Three Cylinder Direct Injection Compression Ignition Engine
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief. The authors have...
2012 / Jaffar Hussain, K. Palaniradja, N. Alagumurthi, R. Manimaran -
Design of an automatic plating machine
Abstract A mechanical system and transmission system of plating machine based on the function requirement of multi-function automatic plating machine has been designed. It conforms to cloth characteristics, production efficiency, product uniformity...
2011 / BU Jian-rong, XU Jun-yan -
A New Segmentation Method for Single View Scene Image Based on Independent Graphic Function Code
Abstract Based on the law of visual perception, we proposed three elements to describe the scene image: ground, objects and sky, and the equation of single view scene image. By using the fast classification, which is based on the independent graphic ...
2011 / Ma Yong, Tang Zhenmin, Zhang Haofeng -
Automatic Generated Navigation Mesh Algorithm on 3D Game Scene
Abstract Navigation mesh is an important representation method for 3D game scene, and its generation technology directly influenced the game role's pathfinding efficiency. Firstly introduced several common representation methods for 3D game scene,...
2011 / Xiang Xu, Min Huang, Kun Zou -
Inverse Estimation Problem of Determining the Unknown Timewise-varying Strength of a Primer Rapid Heat Source
Abstract The research presents an input method to estimate the unknown time-varying strength on the sources of a primer applied at this on-line inverse heat conduction problem. We use the input method to recursively predict both the impulse strength ...
2014 / Yang-Hsiung Ko, Jiu-Zhang Lu, Kai-Tai Lu, Tsao-Fa Yeh -
A Guide for Genetic Algorithm Based on Parallel Machine Scheduling and Flexible Job-Shop Scheduling
Abstract Parallel Machine Scheduling (PMS) and Flexible Job-shop Scheduling (FJS) are the hardest combinatorial optimization problems, they require very large scale search space. Solving this kind of combinatorial optimization problems with...
2012 / Bilgesu Ak, Erdem Koc -
Calculation of the Arc Velocity Along the Polluted Surface of Short Glass Plates Considering the Air Effect2012 / Wenxia Sima, Fusheng Guo, Qing Yang, Tao Yuan
-
Vehicle Index Estimation for Signalized Intersections Using Sample Travel Times
Abstract We introduce in this paper the concept of vehicle indices in a cycle at a signalized intersection which are the positions of vehicles in the departure process of the cycle. We show that vehicle indices are closely relate to the vehicle...
2013 / Peng Hao, Zhanbo Sun, Xuegang (Jeff) Ban, Dong Guo, Qiang Ji -
The IT convergence framework design in the internet of things environment2013 / Taijong Yoo, Hangbae Chang
-
Microstructure-based 3D Finite Element Model for Micro Drilling Carbon Steels
Abstract It is well recognized that microstructure controls the physical properties and thermo-mechanical behaviour of a material. The complexity of the microstructure often makes it very difficult to simulate the material behavior in cutting...
2013 / M. Abouridouane, F. Klocke, D. Lung