Mechanical engineering topic list of research papers
-
ADAPTATION EVALUATION
Twenty subjects with lower limb disabilities participated in a simulator study. The purpose of the study was to investigate how an Adaptive Cruise Control (ACC) system together with two different hand controls for accelerator and brake influenced workload, comfort ...
2014 / Björn PETERS -
Finite Element Analysis and Vibration Control of a Deep Composite Cylindrical Shell Using MFC Actuators2012 / Gangolu Vijay Kumar, Samikkannu Raja, Karavadappa Basavarajappa Prasanna, Valliappan Sudha
-
Modelling of heat and flow phenomena occuring in waterwall tubes of boilers for supercritical steam parameters2010 / Wiesław Zima, Sławomir Grądziel, Artur Cebula
-
A Bayesian Framework for Human Body Pose Tracking from Depth Image Sequences2010 / Youding Zhu, Kikuo Fujimura
-
MHD Forced Convection Laminar Boundary Layer Flow of Alumina-Water Nanofluid over a Moving Permeable Flat Plate with Convective Surface Boundary Condition2013 / S. M. AbdEl-Gaied, M. A. A. Hamad
-
Computer Modeling of a Pump Screw and Disc Tool Cross Shaping Process
Abstract The article describes the method of computer contouring of disc tools for pump screws and compressor units treatment. The described method is based on the usage of mathematical kernel and software of a modern graphical CAD system. The...
2015 / A.A. Lyashkov, K.L. Panchuk -
Reprint of: Benchmarking of Different Wave Models for Sound Propagation in Non-Uniform Flows
Abstract Weak forms of the second-order Pierce wave operator and of third-order Pridmore-Brown wave operator are discretized in frequency-domain by using a standard Galerkin approach and verified against model problems of practical interest, for...
2010 / Damiano Casalino -
Research on the Optimization Method of Maintenance Support Unit Configuration with Queuing Theory
Abstract Beginning with the conception of maintenance support unit, the maintenance support flow is analyzed, so as to confirm the relation between damaged equipment mean-time-to-repair and the number of maintenance support units. On that basis, the ...
2012 / Bo Zhang, Ying Xu, Yue Dong, Na Hou, Yongli Yu -
On the aeroacoustic and flow structures developed on a flat plate with a serrated sawtooth trailing edge
Abstract Results of an experimental study on turbulent flow over a flat plate with a serrated sawtooth trailing edge are presented in this paper. After tripping the boundary layer to become turbulent, the broadband noise sources at the sawtooth...
2015 / Tze Pei Chong, Alexandros Vathylakis -
Energy Efficiency Evaluation for Machining Process in Flexible Manufacturing Systems – A Case Study
Abstract In the industry, the cost of electricity, although increasing, is not regarded as a production cost, and thus the energy efficiencies of equipment are usually not considered. To gain knowledge about energy efficiencies in the machining...
2015 / Hugo M.B. de Carvalho, Jefferson de Oliveira Gomes -
An exploratory study of informed engineering design behaviors associated with scientific explanations2015 / Şenay Purzer, Molly Hathaway Goldstein, Robin S Adams, Charles Xie, Saeid Nourian
-
Numerical Study on Cavitating Flow due to a Hydrofoil near a Free Surface
Abstract A numerical strategy is proposed for a viscous uniform flow past a 2-D partially cavitating hydrofoil placed at a finite depth from the free surface. The flow was modeled by the Reynolds-averaged Navier–Stokes (RANS) equations. A...
2016 / Ping-Chen Wu, Jiahn-Horng Chen -
The Application of Fuzzy PID Control in Pitch Wind Turbine
Abstract The theory of fuzzy control and PID control were applied to the control of generator speed and blade pitch angle. During the early period the fuzzy controller was used to improve system responsiveness and reduce the overshoot. When entering ...
2012 / Yishuang Qi, Qingjin Meng -
Novel Image Mosaic Algorithm for Concrete Pavement Surface Image Reconstruction
Abstract In this paper, a novel image mosaic method for concrete pavement surface image sequences reconstruction has been proposed. Harris corner points are extracted uniformly from the overlapped areas of concrete pavement surface images, which are ...
2013 / Hua Wang, Xin Liu, Shen Zhang, Wei Quan -
Radius of curvature analysis of oscillating follower cylindrical cam's expansion pitch curve2015 / J. Chen, J. Wu, T. Tang
-
Do-it-yourselfers as Lead users for Environmentally Conscious Behavior
Abstract Much engineering effort has focused on developing more resource-efficient products. However, use behavior is clearly relevant to resource conservation. Wasteful behavior offsets at least part of the anticipated gains in resource efficiency...
2014 / Song-Liang Lai, L.H. Shu -
Adaptive fuzzy trajectory control for biaxial motion stage system2016 / W.-L. Mao, C.-W. Hung, Suprapto
-
An industry-scale modeling for the turbulence agglomeration of fine particles2015 / J. Xu, H. Shen, H. Wang
-
Recent advance in nonlinear aeroelastic analysis and control of the aircraft
Abstract A review on the recent advance in nonlinear aeroelasticity of the aircraft is presented in this paper. The nonlinear aeroelastic problems are divided into three types based on different research objects, namely the two dimensional airfoil,...
2013 / Jinwu Xiang, Yongju Yan, Daochun Li -
Classifying Secondary Task Driving Safety Using Method of F-ANP2015 / L. Jin, K. Li, Y. Jiang, H. Xian, L. Gao