Mechanical engineering topic list of research papers
-
Numerical simulation on the NACA0018 airfoil self-noise generation
Abstract Airfoil self-noise is a common phenomenon for many engineering applications. Aiming to study the underlying mechanism of airfoil self-noise at low Mach number and moderate Reynolds number flow, a numerical investigation is presented on...
2012 / Min Jiang, Xiaodong Li, Baohong Bai, Dakai Lin -
A fiber Bragg grating direct current sensor with temperature compensation based on electromagnetic force2015 / Y. Yao, C. Zhou, W. Zhang, Q. Xue, Y. Ling
-
Research on the Microstructure and Property of an Anion Rubber Modified Asphalt2013 / Wei Hong, Qingshan Li, Guoquan Guan, Youbo Di, Jing Sun, et al.
-
Performance Analysis of A Spark Ignition Engine Using Compressed Natural Gas (CNG) as Fuel
Abstract Compress natural gas (CNG) is also considered as alternative fuel to produce better emission in a vehicle, but the main disadvantage of CNG in comparison to liquid fuel (gasoline) is the lack of power produced for the same capacity of...
2015 / Musthafah Mohd. Tahir, M.S. Ali, M.A. Salim, Rosli A. Bakar, A.M. Fudhail, et al. -
A novel minimal exposure path problem in wireless sensor networks and its solution algorithm2016 / H. Feng, L. Luo, Y. Wang, M. Ye, R. Dong
-
Research of Model-based Aeroengine Control System Design Structure and Workflow
Abstract The control system of aeroengine design is a complex system engineeringincludingmany procedure of different subsystems. To improve the efficiency of areoengine control system design and reduce the cost and development period of research...
2015 / Dong Zhang, Jin-zhi Lu, Lin Wang, Jun Li -
Theoretical and Linearity Analysis for Pressure Sensors and Communication System Development2014 / Taikyeong Jeong
-
Enhancing Scheduling Performance for a Wafer Fabrication Factory: The Biobjective Slack-Diversifying Nonlinear Fluctuation-Smoothing Rule2012 / Toly Chen, Yu Cheng Wang
-
Risk Evaluation of Bogie System Based on Extension Theory and Entropy Weight Method2014 / Yanping Du, Yuan Zhang, Xiaogang Zhao, Xiaohui Wang
-
Active Sensing Based Bolted Structure Health Monitoring Using Piezoceramic Transducers2013 / R. L. Wang, H. Gu, G. Song
-
Application of Wireless Intelligent Control System for HPS Lamps and LEDs Combined Illumination in Road Tunnel2014 / Jinxing Lai, Junling Qiu, Jianxun Chen, Yaqiong Wang, Haobo Fan
-
Finite element analysis on multi-step rolling process and controlling quality defect for steel wheel rim2015 / P. Lu, Y. K. Zhang, F. Ma
-
Comparative study on the performance of pod type waterjet by experiment and computation2015 / Moon-Chan Kim, Warn-Gyu Park, Ho-Hwan Chun, Un-Hwa Jung
-
An optimal design of wind turbine and ship structure based on neuro-response surface method2015 / Jae-Chul Lee, Sung-Chul Shin, Soo-Young Kim
-
Monitoring of Tool Vibration for Magnetorheological Fluid Controlled Bar During Turning ff Hardened Aisi4340 Steel / Monitorowanie Wibracji Narzedzia W Czasie Toczenia Na Twardo Stali Aisi4340 Przy Uzyciu Tłumika Ze Sterowanym Płynem O Własciwosciach Magnetoreologicznych2015 / P. Sam Paul, Mohammed Jazeel, A.S. Varadarajan
-
Performance and Emission Characteristic on a Two Cylinder DI Diesel Engine Fuelled with Ethanol-Diesel Blends
Abstract An experiment on the application of diesel and ethanol blends as fuel in diesel engine was carried out at various engine loads and ethanol percentages. The experiments were performed using solar, E2.5%, E5%, E7.5%, and E10% ethanol-diesel...
2013 / Yanuandri Putrasari, Arifin Nur, Aam Muharam -
Studies on Rheological Behaviors of Bismaleimide Resin System for Resin Transfer Molding
Abstract The rheological behavior of bismaleimide resin for resin transfer molding(RTM) was studied with DSC analysis and viscosity experiments. A rheological model based on the dual-Arrhenius equation was established and used to simulate the...
2011 / Yao LU, Yue-xin DUAN, Zhi-yong LIANG -
Effects of the Spanwise Characteristic Length on the Transition Feature in the Wake of a Cylinder
Abstract The transition features of the wake behind a uniform circular cylinder at Re = 200, which is just beyond the critical Reynolds number of 3-D transition, are investigated in detail by direct numerical simulations of 3-D incompressible...
2011 / Jun XIONG, Guo-can LING, Ke-qin ZHU -
Evaluation of the added mass for a spheroid-type unmanned underwater vehicle by vertical planar motion mechanism test2015 / Seong-Keon Lee, Tae-Hwan Joung, Se-Jong Cheon, Taek-Soo Jang, Jeong-Hee Lee
-
A Three-Dimensional Model of the Effective Electromechanical Impedance for an Embedded PZT Transducer2013 / Chunyuan Zuo, Xin Feng, Jing Zhou