Mechanical engineering topic list of research papers
-
Numerical simulation of orbitally shaken viscous fluids with free surface2012 / Marco Discacciati, David Hacker, Alfio Quarteroni, Samuel Quinodoz, Stéphanie Tissot, et al.
-
The Selection Algorithm for Connection Modes of Medium Voltage Power Distribution Network Based on FAHP-GRA
Abstract This paper used fuzzy analytic hierarchy process (FAHP) and gray relational analysis (GRA) to solve the selection for the connection modes of medium voltage (MV) power distribution network. Firstly, it established the comprehensive...
2012 / Wu Han, Lin Han, Chen Bin, Wu Han, Wen Bu ying -
Temperature Distribution and Pressure Response of GIS on Partially Overheated State
Abstract A feasible way to detect the partially overheated disfigurement of GIS is provided by Beattie-Bridgman equation which depicts the relationship between the temperature and pressure of SF6. According to the actual structure of GIS, we build a ...
2011 / Songhai Fan, Jing Li, Chan Hu, Pu He, Hongyu Nie, et al. -
Research of Multi-Fuel Burning Stability In A 300MW Coal-Fired Utility Boiler
Abstract With China's economy growing rapidly, requirement of electricity is more and more. Now, 300MW coal-fired units are main units. With diversification of coal, there are big differences between actual coal and design coal, this affect on the...
2012 / Ren Jianxing, Li Fangqin, Zhu Qunzhi, Wu Jiang, Yang Yongwen, et al. -
Optimization of Auxiliary Power Consumption of Combined Cycle Power Plant
Abstract Energy requirement increases day by day. Thermal power plants are the measure source of energy for electricity generation. They are also the measure polluter of the environment. In order to reduce environmental pollution either energy...
2013 / Tejas N. Raval, R.N. Patel -
Reprint of: On the importance of specifying appropriate nozzle-exit conditions in jet noise prediction
Abstract In this paper, the importance of initial conditions on subsonic jet noise is emphasized by showing numerical results obtained by large-eddy simulations for initially laminar round jets at Mach number 0.9 and Reynolds number 105. The near...
2010 / Christophe Bogey, Christophe Bailly -
Influence of Intensity Distribution and Pulse Duration on Laser Micro Polishing
Abstract Laser micro polishing with pulsed laser radiation is a process to reduce the micro roughness of surfaces. During polishing the properties of the laser radiation have a great influence on the results. In this publication...
2011 / Christian Nüsser, Isabel Wehrmann, Edgar Willenborg -
Introduction to nonlinear acoustics
Abstract A brief review of the basic principles of fluid mechanics needed for development of linear and nonlinear ultrasonic concepts will be given. The fundamental equations of nonlinear ultrasonics will be derived and their physical properties...
2010 / Leif Bjørnø -
Hybrid Electric Vehicle Drive Control
Abstract The engine drive system is used in the hybrid electric vehicle, and meanwhile the direct motor drive system is used in it. The engine and the electric motor compose the mix dynamic system to actuate the vehicles travel together, causing the ...
2011 / Li Houyu, Zhang Guirong -
Preliminary Study of Pressure Profile in Hydrodynamic Lubrication Journal Bearing
Abstract In hydrodynamic lubrication, the pressure condition of the fluid is critical to ensure good performance of the lubricated machine elements such as journal bearings. In the present study, an experimental work was conducted to determine the...
2012 / Salmiah Kasolang, Mohamad Ali Ahmad, Rob-Dwyer Joyce, Che Faridah Mat Tai -
Feasibility Study on the Implementation of Cubic Motion Curve for Vehicle Trajectory Planning2015 / M. F. M. Ghani, J. M. Taib, A. Dzakaria
-
Thermal Aspects in Deep Hole Drilling of Aluminium Cast Alloy Using Twist Drills and MQL
Abstract The deep hole drilling process with solid carbide twist drills is an efficient alternative to the classic single-lip deep hole drilling, due to the generally higher feed rates possible and the consequently higher productivity. Furthermore...
2012 / D. Biermann, I. Iovkov, H. Blum, A. Rademacher, K. Taebi, et al. -
Numerical study of a chemical method applied to instantaneous heat removal under high heat flux2013 / Jing Li, Gao-Ming He, Cheng Zeng, Ye-Ming Liu
-
Performance Evaluation of Technological Innovation Mode on the Equipment Manufacturing Industry of Shanxi Province
Abstract This paper firstly make analysis on the weights of influence factors that affect technological innovation mode of Shanxi equipment manufacturing enterprise through the analytic hierarchy process (ASP) and the entropy weight method. It can...
2011 / Qiao Bin, Xiao-Liang Zhao, Zi-Long Hu -
Preface2011 /
-
External load and the reaction of the musculoskeletal system – A conceptual model of the interaction
Abstract This paper presents a conceptual model of the interaction between the human body and external factors influencing the musculoskeletal system (biomechanical load, vibration and psychosocial factors). The interrelationship of parameters that...
2013 / Danuta Roman-Liu -
An Innovative Use of Renewable Ground Heat for Insulation in Low Exergy Building Systems2012 / Forrest Meggers, Luca Baldini, Hansjürg Leibundgut
-
DEM Simulation of Biaxial Compression Experiments of Inherently Anisotropic Granular Materials and the Boundary Effects2013 / Zhao-Xia Tong, Lian-Wei Zhang, Min Zhou
-
Stress Analysis of Three-Dimensional Media Containing Localized Zone by FEM-SGBEM Coupling2011 / Jaroon Rungamornrat, Sakravee Sripirom
-
A New Fuel Design for Two Different HW Type Reactors2011 / Daniel O. Brasnarof, Armando C. Marino, Juan E. Bergallo, Luis E. Juanicó