Mechanical engineering topic list of research papers
-
A Location Estimation Algorithm Based on RSSI Vector Similarity Degree2014 / Fengjun Shang, Wen Su, Qian Wang, Hongxia Gao, Qiang Fu
-
Constructal vascularized structures2015 / Erdal Cetkin
-
Numerical modeling of rock fracture and fragmentation under impact loading using discrete element method2015 / E. Chi, M. Zhao, J. Liu, Q. Kang
-
Numerical Study of Unsteady Properties of Ethylene/Air Turbulent Jet Diffusion Flame with Detached Eddy Simulation2015 / Sugang Ma, Fengquan Zhong, Xinyu Zhang
-
Epistemic uncertainty quantification in flutter analysis using evidence theory
Abstract Aimed at evaluating the structural stability and flutter risk of the system, this paper manages to quantify epistemic uncertainty in flutter analysis using evidence theory, including both parametric uncertainty and method selection...
2014 / Jian Tang, Zhigang Wu, Chao Yang -
On the Choice of Shear Correction Factor in Sandwich Structures2003 / V. Birman
-
Wind Turbine Tower Vibration Modeling and Monitoring by the Nonlinear State Estimation Technique (NSET)2012 / Peng Guo, David Infield
-
Estimating the Thermal Conductivities and Elastic Stiffness of Carbon Nanotubes as a Function of Tube Geometry2012 / Z. H. Zhang, N. Yu, W. H. Chao
-
Thermal-Insulation Properties of Multilayer Textile Packages2014 / Małgorzata Matusiak, Sylwia Kowalczyk
-
Real-time Unsupervised Segmentation of human whole-body motion and its application to humanoid robot acquisition of motion symbols
Abstract An interactive loop between motion recognition and motion generation is a fundamental mechanism for humans and humanoid robots. We have been developing an intelligent framework for motion recognition and generation based on symbolizing...
2015 / Wataru Takano, Yoshihiko Nakamura -
Active Control Law Design for Flutter/LCO Suppression Based on Reduced Order Model Method
Abstract Active stability augmentation system is an attractive and promising technology to suppress flutter and limit cycle oscillation (LCO). In order to design a good active control law, the control plant model with low order and high accuracy...
2011 / Chen Gang, Li Yueming, Yan Guirong -
Numerical Study of Flow and Heat Transfer Characteristics of Impingement/Effusion Cooling
Abstract Three-dimensional numerical simulation is carried out to investigate the flow and heat transfer characteristics of impingement/effusion cooling systems. The impingement/effusion holes are arranged on two parallel perforated plates...
2009 / Zhang Jingzhou, Xie Hao, Yang Chengfeng -
Schemed Power-augmented Flow for Wing-in-ground Effect Craft in Cruise
Abstract To provide detailed insight into schemed power-augmented flow for wing-in-ground effect (WIG) craft in view of the concept of cruising with power assistance, this paper presents a numerical study. The engine installed before the wing for...
2011 / Wei YANG, Zhigang YANG -
Optical and Electrochemical Combination Sensor with Poly-Aniline Film Modified Gold Surface and Its Application for Dissolved Oxygen Detection2014 / Meng Li, Wei Liu, Jorge P.Correia, Ana C. Mourato, Ana S. Viana, et al.
-
On the wake-induced vibration of tandem circular cylinders: the vortex interaction excitation mechanism2010 / G. R. S. ASSI, P. W. BEARMAN, J. R. MENEGHINI
-
Experimental Study on Inert Replacement Ventilation of Oil Vapor in Oil Tank
Abstract The elimination of oil vapor in oil tank is one of the most dangerous tasks in oil depot. Using common mechanical ventilation to deal with the oil vapor has the shortcomings of poor safety, long ventilation time and low efficiency. However, ...
2012 / Yinchang Li, Yang Du, Peili Zhang -
PAT Efficiency Variation with Design Parameters
Abstract The use of pump operating as turbine (PAT) instead of traditional turbines is an effective source of reducing the equipment cost in small hydropower plants. However, the lack of information on the PATs performances represents a limit for...
2014 / A. Carravetta, O. Fecarotta, R. Martino, L. Antipodi -
Fuzzy Logic based Modelling and Simulation Approach for the estimation of Tire Forces
Abstract Tire modeling is an important aspect of vehicle dynamics as the forces and moments required to control the vehicle's motion are eventually transmitted through the tire and the tire road interface is also an important source for the dynamic...
2013 / R. Jayachandran, S. Denis Ashok, S. Narayanan -
Two Examples of Exergy Optimization Regarding the “Thermo-Frigopump” and Combined Heat and Power Systems2013 / Michel Feidt
-
Operation of a Rotary-valved Pulse Detonation Rocket Engine Utilizing Liquid kerosene and Oxygen
Abstract The pulse detonation rocket engine (PDRE) requires periodic supply of oxidizer, fuel and purge gas. A rotary-valve assembly is fabricated to control the periodic supply in this research. Oxygen and liquid aviation kerosene are used as...
2012 / Ke WANG, Wei FAN, Yu YAN, Xudong ZHU, Chuanjun YAN