Mechanical engineering topic list of research papers
-
Modeling joints with clearance and friction in multibody dynamic simulation of automotive differentials
Abstract Defects in kinematic joints can sometimes highly influence the simulation response of the whole multibody system within which these joints are included. For instance, the clearance, the friction, the lubrication and the flexibility affect...
2013 / Geoffrey Virlez, Olivier Brüls, Emmanuel Tromme, Pierre Duysinx -
An improved HSFR method for natural vibration analysis of an immersed cylinder pile with a tip mass
Abstract Immersed cylinder piles are usually modelled as immersed cantilever cylinder columns carrying a tip mass and rotary moment of inertia. In this paper, the equations of motion of an immersed cylinder pile along transversal modes of vibration...
2012 / Kai Wei, Wancheng Yuan, Najib Bouaanani, Chih-Chen Chang -
Modeling of fuel supply system for a high-temperature high-speed wind tunnel2016 / C. Cai, Y. Yang, T. Liu
-
Image processing of cylinder wake generation2002 / J. Massons, Jna. Gavaldà, F. Díaz, Ll. Solé
-
TRPIV measurement of turbulent coherent structures in a drag-reducing flow by polymers
Abstract Fully developed turbulentflow fields with and without polymer solution at the same Reynolds number were measured by time-resolved particle image velocimetry (TRPIV) in a water channel toinvestigate the mechanism of drag-reducingsolution...
2013 / Xinlei Guan, Nan Jiang, Lu Cheng, Hao Zhang -
Fluid Flow Simulations Based on an Equation-Solving Solution Gradient Strategy2013 / Ho-Shuenn Huang, Yao-Hsin Hwang
-
Advances in petroleum storage and transportation engineering2015 / B. Yu, Y. Li, X. Liu, P. R. de Souza Mendes, J. C. Chai, et al.
-
A System Level Model Reduction Approach for Flexible Multibody Systems with Parametric Uncertainties.
Abstract Stochastic analysis of flexible multibody system for uncertain parameters typically requires a large number of simulation runs for example for Monte-Carlo simulation. However, as the computational load of a regular flexible multibody model...
2015 / Frank Naets, Tommaso Tamarozzi, Wim Desmet -
Rail Mounted Gantry Crane Scheduling Optimization in Railway Container Terminal Based on Hybrid Handling Mode2014 / Li Wang, Xiaoning Zhu
-
Computational study of plasma actuator on film cooling performance for different shaped holes2015 / Sheng-ji Dai, Yang Xiao, Li-ming He, Tao Jin, Peng-hui Hou, et al.
-
Dynamic parameters' identification for the feeding system of computer numerical control machine tools stimulated by G-code2015 / G. Chen, S. Zhu, Q. Zheng
-
An Integrated Telemetric Thermocouple Sensor for Process Monitoring of CFRP Milling Operations
Abstract A wireless temperature measurement system was developed and integrated into a cutting tool holder via a thermocouple embedded within the cutting tool. The primary purpose of such an embedded thermal measurement sensor/system is for online...
2012 / K. Kerrigan, J. Thil, R. Hewison, G.E. O’Donnell -
Analysis of Process Forces for the Precision Honing of Small Bores
Abstract For the honing process the chip removal and therewith the material removal rate and the surface of the part after honing depend on the cutting pressure between the honing stone and the workpiece. In this paper an analytical model of the...
2015 / Uwe Moos, Dirk Bähre -
Effect of cutting speed and feed in turning hardened stainless steel using coated carbide cutting tool under minimum quantity lubrication using castor oil2015 / M. H. S. Elmunafi, N. Mohd Yusof, D. Kurniawan
-
Effective Noise Reduction by Electric Positive and Negative Feedback in Semiconductor Lasers2009 / M. Yamada, M. Huda, E. Teraoka, Y. Kuwamura
-
PMAC-based Tracking Control System for 8-axis Automated Tape-laying Machine
Abstract This article introduces a computer numerical control (CNC)-based open hardware architecture system to realize the special functions of automated tape-laying (ATL) in a numerical control system. It associates a programmable multi-axis...
2009 / Liu Lin, Li Yong, Wen Liwei, Xiao Jun -
Eco-innovation by Integrating Biomimetic Design and ARIZ
Abstract This work presents a new eco-innovative biomimetic design tool by integrating the algorithm for inventive problem solving (Russian acronym: ARIZ) with biologically significant vocabularies to search for related biological cases. ARIZ...
2014 / Wang-Chih Chen, Jahau Lewis Chen -
Energy Efficient Trajectories for an Industrial ABB Robot
Abstract This paper presents a systematic methodology for on-site identification and energy-optimal path planning of an industrial robot. The identification experiments are carried out on-site, in a quick, non-invasive way using a CA8335 Qualistar...
2014 / Koen Paes, Wim Dewulf, Karel Vander Elst, Karel Kellens, Peter Slaets -
Verification of CFD analysis methods for predicting the drag force and thrust power of an underwater disk robot2015 / Tae-Hwan Joung, Hyeung-Sik Choi, Sang-Ki Jung, Karl Sammut, Fangpo He
-
Combustion Characteristics of Diesel-Hydrogen Dual Fuel Engine at Low Load
Abstract In the present study, hydrogen utilization as diesel engine fuel at low load operation was investigated. Hydrogen cannot be used directly in a diesel engine due to its auto ignition temperature higher than that of diesel fuel. One...
2013 / W.B. Santoso, R.A. Bakar, A. Nur