Mechanical engineering topic list of research papers
-
Simulation Modeling of BLDC Motor Drive and Harmonic Analysis of Stator Current, Rotor Speed and Acceleration using Discrete Wavelet Transform Technique
Abstract A simulation model has been developed in this paper to study the behavioral characteristic of Brushless DC motor and also analyses the harmonics present in the stator current, rotor speed and acceleration of the BLDC drive circuit. Hence in ...
2012 / Madhurima Chattopadhyay, Priyanka Roy, Sharmi Dutta -
Research on ABS of Multi-axle Truck Based on ADAMS/Car and Matlab/Simulink
Abstract The anti-lock braking system based on multi-body dynamic and control theory is researched. Multi-body vehicle dynamic model is built in ADAMS/Car and suspension system, tire model, braking system, engine system, steer system, vehicle frame...
2012 / Zhang Xiu-qin, Yang Bo, Yang Chao, Xu Guan-neng -
An Open Loop Walking on Different Slopes for NAO Humanoid Robot
Abstract Dynamic gait planning for humanoid robots encounters difficulties such as stability, speed, and smoothness. In most of previous studies, joints’ trajectories are calculated in 3D Cartesian space, then, introducing boundary conditions and...
2012 / Amir Massah B, Arman Sharifi K., Yaser Salehinia, Farid Najafi -
Development of Microcontroller Based Mobile Gas Sensing Robot
Abstract This paper presents the development of a microcontroller based mobile gas sensing robot. The purpose of the robot is to automatically detect gas leakage along a gas transporting pipeline. The developed microcontroller based mobile gas...
2012 / Mohd Zaki Ghazali, Noorhayati Mohamed Noor, Noraziah Ramly, Sulastri Putit -
Development of PSS Design Support System: Knowledge-based Design Support and Qualitative Evaluation
Abstract This paper proposes methods to support PSS conceptual design. Especially, methods for supporting PSS ideas generation and evaluation are proposed. In the phase of PSS ideas generation, designers’ acquisition of new design solutions is...
2012 / F. Akasaka, Y. Nemoto, R. Chiba, Y. Shimomura -
A proposal for the motion analysis method of skiing turn by measurement of orientation and gliding trajectory
Abstract This paper proposes the motion analysis method on skiing turn by the measurement system of orientation and gliding trajectory. The orientation measurement system that consists of inertial and magnetic field sensor measures angular velocity, ...
2011 / K Hirose, H Doki -
Experimental Analysis of Trajectories for the Modeling of Capacity Drop
Abstract Capacity drop has been well known in the previous decades but not that well modeled. The point of this paper is to produce a new microscopic model that could be suitable for the study of capacity drop, and to examine the simulation results...
2011 / Thomas Monamy, Habib Haj-Salem, Jean-Patrick Lebacque -
Computational Study to Assess the Influence of Overlap Ratio on Static Torque Characteristics of a Vertical Axis Wind Turbine
Abstract This paper presents an unsteady two-dimensional computational study in order to observe the effect of overlap ratios on static torque characteristics of a vertical axis wind turbine (VAWT). The study is performed with the help of a finite...
2013 / Sukanta Roy, Ujjwal K. Saha -
AMADEUS: advanced manipulation for deep underwater sampling2002 / D.M. Lane, J.B.C. Davies, G. Casalino, G. Bartolini, G. Cannata, et al.
-
Ontology and Model-based Systems Engineering
Abstract The subject of this paper is a framework that represents a new approach of information technology in the area of Systems Engineering. This framework enables us to specify, design, engineer, produce and maintain complex capital facilities,...
2012 / Ing. L.C. van Ruijven -
Investigation on Remote Monitoring System for Heat-Supply Thermal Characters Based GPRS
Abstract With the strategy requirements of low-carbon and energy-saving, the appropriate auto-control methods become more and more important. Aiming to monitor the thermal characters of the heat exchange station in the real time, the investigation...
2012 / Liu jie, He yunfeng, Zhao wenjun, Li xiaojun -
Configuration Management – A Core Competence for Successful through-life Systems Engineering and Engineering Services
Abstract Through-life engineering services depend on capabilities to track and trace long-living systems and their components throughout the lifecycle. System configurations need to be known to (re)engineer, build, operate, maintain, and dispose...
2013 / Patrick Müller -
Cable installation simulation by using a multibody dynamic model2013 / Cai Jin Yang, Di Feng Hong, Ge Xue Ren, Zhi Hua Zhao
-
Experimental on the liquid cooling system with thermoelectric for personal computer2012 / Osot Khonsue
-
Experiment Study on the Ignition Point of XPS Foam Plastics
Abstract In this paper, experiments were performed for the study of combustion characteristics of extruded polystyrene foam (XPS). The ignition temperature of extruded polystyrene foam (XPS) was studied by two different means in the fire laboratory...
2013 / Ru-shi Han, Guo-qing Zhu, Guo-wei Zhang -
Wake-flat Plate Boundary Layer Interaction at Low Reynolds Number
Abstract The present numerical study has been conducted to observe the unsteady boundary layer characteristics on a flat plate induced by a von Karman vortex street wake. This flow situation is an idealization of that occurring on turbomachinery...
2013 / Sanchita Amin, Dipak Kanti Das -
Aerodynamic design optimization of nacelle/pylon position on an aircraft
Abstract The arbitrary space-shape free form deformation (FFD) method developed in this paper is based on non-uniform rational B-splines (NURBS) basis function and used for the integral parameterization of nacelle-pylon geometry. The multi-block...
2013 / Jing Li, Zhenghong Gao, Jiangtao Huang, Ke Zhao -
Experimental study of hydrogen-rich/oxygen-rich gas–gas injectors
Abstract Five types of coaxial injectors were investigated experimentally using hot hydrogen-rich gas and oxygen-rich gas, which were respectively provided by a GH2/GO2 hydrogen-rich perburner and a GH2/GO2 oxygen-rich preburner. The injectors were...
2013 / Ping Jin, Mao Li, Guobiao Cai -
Computerized Optimization of the Process Parameters in Laser-Assisted Milling
Abstract Machining advanced materials, e.g. titanium alloys, usually results in a short tool life. Laser-assisted milling represents an innovative method to enhance machinability with less tool wear and an increased material removal rate. The...
2011 / R. Wiedenmann, M. Langhorst, M.F. Zaeh -
A study on pressure evolution in a channel system during CO2 injection
Abstract Risk assessment and feasibility studies based on numerical simulations are essential for a realisation of large scale carbon capture and storage projects. The numerical simulation of CO2 storage in deep saline aquifers, which is focused on...
2011 / Lena Walter, Sergey Oladyshkin, Holger Class, Melanie Darcis, Rainer Helmig