Mechanical engineering topic list of research papers
-
A Thermo-Hydraulic Tool for Automatic Virtual Hazop Evaluation2014 / L. Pugi, R. Conti, A. Rindi, S. Rossin
-
An approach for machining distortion measurements and evaluation of thin-walled blades with small datum
Abstract Inspection techniques for aero-engine blades are a hot topic in industry. Since these blades have a sculptured surface and a small datum, measurement results may deviate from an actual position. There are few proper approaches compensating...
2016 / Jianhua Yu, Zhitong Chen, Zepeng Jiang -
Mathematical model and characteristic analysis of hybrid photovoltaic/piezoelectric actuation mechanism2016 / Jing Jiang, Xiaonan Li, Jincheng Ding, Honghao Yue, Zongquan Deng
-
Pressure and temperature effects on fuels with varying octane sensitivity at high load in SI engines
Abstract The octane sensitivity (S), defined as the difference between the Research Octane Number (RON) and the Motor Octane Number (MON), is of increasing interest in spark ignition (SI) engines because of its relevance to knock resistance at...
2017 / James P. Szybist, Derek A. Splitter -
Experimental investigations into power generation with low grade waste heat and R245fa Organic Rankine Cycles (ORCs)
Abstract In this study, experimental research was conducted to investigate the performance of a small-scale Organic Rankine Cycle (ORC) system utilising low grade heat sources to generate electric power at different operating conditions. The...
2017 / L. Li, Y.T. Ge, X. Luo, S.A. Tassou -
An optimized ensemble local mean decomposition method for fault detection of mechanical components2017 / Chao Zhang, Zhixiong Li, Chao Hu, Shuai Chen, Jianguo Wang, et al.
-
Experimental investigation of domestic micro-CHP based on the gas boiler fitted with ORC module2017 / Jan Wajs, Dariusz Mikielewicz, Michał Bajor, Zbigniew Kneba
-
The influence of cooling techniques on cutting forces and surface roughness during cryogenic machining of titanium alloys2016 / Iwona Wstawska, Krzysztof Ślimak
-
Combustion, performance and emission analysis of a DI diesel engine using plastic pyrolysis oil
Abstract Plastic waste is an ideal source of energy due to its high heating value and abundance. It can be converted into oil through the pyrolysis process and utilised in internal combustion engines to produce power and heat. In the present work,...
2016 / Ioannis Kalargaris, Guohong Tian, Sai Gu -
Thermal analysis of heat and power plant with high temperature reactor and intermediate steam cycle2015 / Adam Fic, Jan Składzień, Michał Gabriel
-
The effect of the orientation of cubical projectiles on the ballistic limit and failure mode of AA2024-T351 sheets
Abstract This paper presents the results of an investigation of the ballistic limits and failure modes of AA2024-T351 sheets impacted by cubical projectiles. The effect of cube orientation on the ballistic limit and failure modes was considered in...
2017 / T. De Vuyst, R. Vignjevic, A. Azorin Albero, K. Hughes, J.C. Campbell, et al. -
A dynamically adaptive lattice Boltzmann method for thermal convection problems2017 / Kai Feldhusen, Ralf Deiterding, Claus Wagner
-
Droplet spreading and permeating on the hybrid-wettability porous substrates: a lattice Boltzmann method study2016 / Wen-Kai Ge, Gui Lu, Xin Xu, Xiao-Dong Wang
-
Reducing the mast vibration of single-mast stacker cranes by gain-scheduled control2017 / Sándor Hajdu, Péter Gáspár
-
Structural Optimization of the Retractable Dome for Four Meter Telescope (FMT)2017 / Nian Pan, Yuxi Li, Yue Fan, Wenli Ma, Jinlong Huang, et al.
-
Numerical heat transfer analysis of transcritical hydrocarbon fuel flow in a tube partially filled with porous media2017 / Yuguang Jiang, Yu Feng, Silong Zhang, Jiang Qin, Wen Bao
-
Experimental Investigation on Effects of Central Air Jet on the Bluff-body Stabilized Premixed Methane-air Flame
Abstract Flame stabilized by a bluff-body is a common scene in many engineering applications due to the enhanced mixing characteristics, improved flame stability, and ease of combustion control. We recently designed a burner which has a conical...
2017 / Yiheng Tong, Mao Li, Marcus Thern, Jens Klingmann, Wubin Weng, et al. -
A Coupled Smoothed Finite Element-Boundary Element Method for Structural-Acoustic Analysis of Shell2017 / Wanyi Tian, Lingyun Yao, Li Li
-
Eliminating drift of the head gesture reference to enhance Google Glass-based control of an NAO humanoid robot2017 / Xiaoqian Mao, Xi Wen, Yu Song, Wei Li, Genshe Chen
-
Coordinated Formation Control of Multiple Autonomous Underwater Vehicles for Pipeline Inspection2012 / Xianbo Xiang, Bruno Jouvencel, Olivier Parodi