Mechanical engineering topic list of research papers
-
Thickness mode EMIS of constrained proof-mass piezoelectric wafer active sensors2015 / Tuncay Kamas, Victor Giurgiutiu, Bin Lin
-
Performance evaluation of two types of heated cables for distributed temperature sensing-based measurement of soil moisture content
Abstract Distributed temperature sensing (DTS) using heated cables has been recently developed for distributed monitoring of in-situ soil moisture content. In this method, the thermal and electrical properties of heated cables have a significant...
2015 / Dingfeng Cao, Bin Shi, Honghu Zhu, Kun Zhu, Guangqing Wei, et al. -
Frequency response of rectangular plates with free-edge openings and carlings subjected to point excitation force and enforced displacement at boundaries2016 / Dae Seung Cho, Byung Hee Kim, Jin-Hyeong Kim, Nikola Vladimir, Tae Muk Choi
-
5.4.1 An Experimental Methodology to Evaluate Concept Generation Procedures Based on Quantitative Lifecycle Performance2014 / Michel-Alexandre Cardin, Gwendolyn L. Kolfschoten, Daniel D. Frey, Richard de Neufville, Olivier L. de Weck, et al.
-
Approximate analytic solution of (2+1) dimensional coupled differential Burger’s equation using Elzaki Homotopy Perturbation Method
Abstract Burger’s equation plays a key role in explaining the behavior of nonlinear systems. In this paper, Elzaki Homotopy Perturbation Method (EHPM) was applied to (2+1) dimensional coupled differential Burger’s equation so as to obtain series and ...
2016 / Muhammad Suleman, Qingbiao Wu, Ghulam Abbas -
Vibration suppression of thin-walled workpiece machining considering external damping properties based on magnetorheological fluids flexible fixture
Abstract Milling of the thin-walled workpiece in the aerospace industry is a critical process due to the high flexibility of the workpiece. In this paper, a flexible fixture based on the magnetorheological (MR) fluids is designed to investigate the...
2016 / Junjin Ma, Dinghua Zhang, Baohai Wu, Ming Luo, Bing Chen -
Streamwise-body-force-model for rapid simulation combining internal and external flow fields
Abstract A streamwise-body-force-model (SBFM) is developed and applied in the overall flow simulation for the distributed propulsion system, combining internal and external flow fields. In view of axial stage effects, fan or compressor effects could ...
2016 / Rong Cui, Qiushi Li, Tianyu Pan, Jian Zhang -
Effect of turbulence models on predicting convective heat transfer to hydrocarbon fuel at supercritical pressure
Abstract A variety of turbulence models were used to perform numerical simulations of heat transfer for hydrocarbon fuel flowing upward and downward through uniformly heated vertical pipes at supercritical pressure. Inlet temperatures varied from...
2016 / Zhi Tao, Zeyuan Cheng, Jianqin Zhu, Haiwang Li -
Desalination of shale gas produced water: A rigorous design approach for zero-liquid discharge evaporation systems
Abstract Shale gas has recently emerged as a promising energy source to face the increasing global demand. This paper introduces a new rigorous optimization model for the simultaneous synthesis of single and multiple-effect evaporation (SEE/MEE)...
2016 / Viviani C. Onishi, Alba Carrero-Parreño, Juan A. Reyes-Labarta, Eric S. Fraga, José A. Caballero -
Numerical investigation of unsteady mixing mechanism in plate film cooling
Abstract A large-scale large eddy simulation in high performance personal computer clusters is carried out to present unsteady mixing mechanism of film cooling and the development of films. Simulation cases include a single-hole plate with the...
2016 / Shuai Li, Zongjing Yuan, Gang Chen -
A dedicated electric oven for characterization of thermoresistive polymer nanocomposites
Abstract The construction, characterization and control of an electric oven dedicated to the study of thermoresistive polymer nanocomposites is presented. The oven is designed with a heating plate capable of reaching 300°C with a resolution of 0.3°C ...
2016 / M. Cen-Puc, G. Pool, F. Avilés, A. May-Pat, S. Flores, et al. -
Ultrathin Fluidic Laminates for Large-Area Façade Integration and Smart Windows2016 / Benjamin P. V. Heiz, Zhiwen Pan, Gerhard Lautenschläger, Christin Sirtl, Matthias Kraus, et al.
-
A Vehicle Parking Detection Method Based on Correlation of Magnetic Signals2015 / Hongmei Zhu, Fengqi Yu
-
Diffusion behavior study of model diesel components in polymer membranes based on neural network for pattern recognition
Abstract A neural network for a pattern recognition model is developed for the first time to predict the diffusion behavior of the model diesel components (dibenzothiophene and quinolone) in three different membranes of polyvinyl alcohol, polyvinyl...
2016 / Xiaoyi Liang, Xingsheng Gu, Changjian Ling, Zhen Yang -
A fully automated framework for helicopter rotor blades design and analysis including aerodynamics, structure, and manufacturing
Abstract This study describes an integrated framework in which basic aerospace engineering aspects (performance, aerodynamics, and structure) and practical aspects (configuration visualization and manufacturing) are coupled and considered in one...
2016 / Ngoc Anh Vu, Jae Woo Lee, Tuan Phuong Nam Le, Song Thanh Thao Nguyen -
The onset of vortex-induced vibrations of a flexible cylinder at large inclination angle2016 / Rémi Bourguet, Michael S. Triantafyllou
-
A coupled finite-volume CFD solver for two-dimensional elasto-hydrodynamic lubrication problems with particular application to rolling element bearings
Abstract This paper describes a new computational fluid dynamics methodology for modelling elastohydrodynamic contacts. A finite-volume technique is implemented in the ‘OpenFOAM’ package to solve the Navier-Stokes equations and resolve all gradients ...
2016 / A. Hajishafiee, A. Kadiric, S. Ioannides, D. Dini -
Flow field design and process stability in electrochemical machining of diamond holes
Abstract The metal grille, commonly composed of an amount of diamond holes, has been growingly used as a key structure on stealth aircraft. Electrochemical machining (ECM) promises to be increasingly applied in aircraft manufacturing on the...
2016 / Zhao Jianshe, Wang Feng, Liu Zhuang, Zhang Xiangli, Gan Weimin, et al. -
Research and Modeling of Mechanical Crosstalk in Linear Arrays of Ultrasonic Transducers2016 / Mateusz Celmer, Krzysztof J. Opieliński
-
Characteristics of Pneumatic Tuners of Torsional Oscillation as a Result of Patent Activity2016 / Jaroslav Homišin