Mechanical engineering topic list of research papers
-
Pilot testing of a hydraulic bridge exciter2015 / Andreas Andersson, Mahir Ülker-Kaustell, Richard Borg, Olivier Dymén, Anders Carolin, et al.
-
An arbitrary shape clustering algorithm over variable density data streams2016 / Na Su, Jimin Liu, Changqing Yan, Taian Liu, Xinjun An
-
Conceptual design and comparative stiffness analysis of an Exechon-like parallel kinematic machine with lockable spherical joints2017 / Teng-fei Tang, Jun Zhang
-
Surface roughness estimation by optimal tactile features for fruits and vegetables2017 / Jun Zhou, Yimeng Meng, Mingjun Wang, Muhammad Sohail Memon, Xiaorong Yang
-
Technological aspects regarding machining the titanium alloys by means of incremental forming2017 / Octavian Bologa, Carmen Cotigă
-
Study on Braking Sensation Based on Urban Working Conditions2017 / Lanie Abi, Tianji Feng, Mingyue Zhou, Jiajun Chen
-
Environmental and Economic Implications of Distributed Additive Manufacturing: The Case of Injection Mold Tooling2017 / Runze Huang, Matthew E. Riddle, Diane Graziano, Sujit Das, Sachin Nimbalkar, et al.
-
Influence of Operating Parameters on Running-in Wear of EN-31 Steel2016 / M. Hanief, M. F. Wani
-
Nonlinear phenomena in mechanical robots and multibody mechanical systems2017 / JA Tenreiro Machado, António M Lopes
-
Surface texture formation in precision machining of direct laser deposited tungsten carbide2017 / Szymon Wojciechowski, Zbigniew Nowakowski, Radomir Majchrowski, Grzegorz Królczyk
-
The Experiment Research of the MoS2 Using As the Solid Lubricant2017 / Shi-Rong Zhang, Jiang-Le Li, She-Liang Wang
-
Multi-scale thermodynamic analysis method for 2D SiC/SiC composite turbine guide vanes
Abstract Ceramic Matrix Composite (CMC) turbine guide vanes possess multi-scale stress and strain with inhomogeneity at the microscopic scale. Given that the macroscopic distribution cannot reflect the microscopic stress fluctuation, the macroscopic ...
2017 / Xin LIU, Xiuli SHEN, Longdong GONG, Peng LI -
Control System Design of the YWZ Multi-Fingered Dexterous Hand2012 / Wenzhen Yang, Shiguang Yu, Hua Zhang, Wenhua Chen
-
Valve–pump parallel variable mode control for hydraulic speed regulation of high-power systems2017 / Haigang Ding, Jiyun Zhao, Chao Cao, Liang Zhao
-
Effect of welding parameters on mechanical properties of GTAW of UNS S31803 and UNS S32750 weldments2015 / Prabhu Paulraj, Rajnish Garg
-
Heating storage performance of a water tank–combined phase change material:An experimental case study2017 / Ling Xie, Yifei Lv, Jun Lu, Yongcai Li, Shuli Liu, et al.
-
Turbulence Modeling of Channel Flow and Heat Transfer: A Comparison with DNS Data
Abstract In the present study, seven turbulence models based on Reynolds Averaged Navier-Stokes (RANS) equations have been used to justify their accuracy and suitability by comparing with direct numerical simulation (DNS) data of turbulent channel...
2017 / Tushar Mollik, Bishwajit Roy, Sumon Saha -
Fuzzy Vector Field Orientation Feedback Control-Based Slip Compensation for Trajectory Tracking Control of a Four Track Wheel Skid-steered Mobile Robot2013 / Xuan Vinh Ha, Cheolkeun Ha, Jewon Lee
-
Investigation of Bayesian network for reliability analysis and fault diagnosis of complex systems with real case applications2017 / Shen Chen, Zhen Qi, Dehuai Chen, Liangfu Guo, Weiwen Peng
-
Soft Matter Lubrication: Does Solid Viscoelasticity Matter?2017 / Carmine Putignano, Daniele Dini