Mechanical engineering topic list of research papers
-
Performance of working-fluid mixtures in ORC-CHP systems for different heat-demand segments and heat-recovery temperature levels
Abstract In this paper, we investigate the adoption of working-fluid mixtures in ORC systems operating in combined heat and power (CHP) mode, with a power output provided by the expanding working fluid in the ORC turbine and a thermal energy output...
2017 / Oyeniyi A. Oyewunmi, Christoph J.W. Kirmse, Antonio M. Pantaleo, Christos N. Markides -
Dynamic simulation and experimental validation of a two-phase closed thermosyphon for geothermal application
Abstract The heat transfer performance of a vertical two-phase closed thermosyphon (TPCT) used in a geothermal heat pump was experimentally investigated. The TPCT is a vertical plain steel pipe with inner diameter of 114 mm and bored 368m deep...
2017 / Johann-Christoph Ebeling, Xing Luo, Stephan Kabelac, Sebastian Luckmann, Horst Kruse -
Inverse solution to heat transfer coefficient during heat assembly of aluminum alloy drill pipes2017 / Youhong Sun, Xiaofeng Wang, Baochang Liu, Dali Ding, Qingnan Meng
-
Automatic control of the microaerial vehicles’ attitude and position2017 / Romulus Lungu, Mihai Lungu
-
Modelling of ductile fracture in single point incremental forming using a modified GTN model
Abstract Understanding the deformation and failure mechanisms in single point incremental forming (SPIF) is of great importance for achieving improved formability. Furthermore, there will be added benefits for more in depth evaluation of the effect...
2017 / Shakir Gatea, Hengan Ou, Bin Lu, Graham McCartney -
A unified design for lightweight robotic arms based on unified description of structure and drive trains2017 / Haibin Yin, Shansheng Huang, Mingchang He, Junfeng Li
-
Chaotic Characteristics and the Application of SVM in the Tool Wear State Recognition2016 / Shan Guan, Hongyang Pang, Zhenxing Kang
-
Numerical study of the effect of wall temperature profiles on the premixed methane–air flame dynamics in a narrow channel2017 / Xin Kang, Rowan J. Gollan, Peter A. Jacobs, Ananthanarayanan Veeraragavan
-
Performance Prediction Network for Serial Manipulators Inverse Kinematics Solution Passing Through Singular Configurations2012 / Ali T. Hasan, H.M.A.A. Al-Assadi
-
Design of Condition-Based Decision Support System for Preventive Maintenance2017 / Róbert Galamboš, Jana Galambošová, Vladimír Rataj, Miroslav Kavka
-
Reflected field analysis of soft–hard pentafurcated waveguide2017 / Mahmood-Ul-Hassan, Mahvish Naz, Rab Nawaz
-
Multi-objective optimization design of cycloid pin gear planetary reducer2017 / Yaliang Wang, Qijing Qian, Guoda Chen, Shousong Jin, Yong Chen
-
Design, Construction and Evaluation of Potato Digger with Rotary Blade2014 / P. Azizi, N. Sakenian Dehkordi, R. Farhadi
-
The Design of a Bistable Composite Connection Method Applied on the Low Volume Production of a Breast Board Table Connection2017 / Arnout Debyser, Bert Boute, Jan Detand
-
Optimum Synthesis of Oscillating Slide Actuators for Mechatronic Applications
Abstract The oscillating-slide inversion of the slider-crank mechanism, commonly symbolized RPRR, is widely used to convert the displacement of an input linear motor (either electric, hydraulic or pneumatic), into the swing motion of a rocker. This...
2017 / Petru A. Simionescu -
Cross-coupling control method for five-axis computer numerical control machine with dual rotary tables2017 / GY Zhao, BY Zhuang, GM Zheng, YG Zhao
-
Study of the influence mechanism of pitch deviation on cylindrical helical gear meshing stiffness and vibration noise2017 / Feng Wang, Xing Xu, Zongde Fang, Long Chen
-
Investigation of the effect of FeCl 3 on combustion and emission of diesel engine with thermal barrier coating
Abstract In the present investigation, the engine performance and emission characteristics of a single cylinder diesel engine with yttria stabilized zirconia (YSZ) coating on piston crown and valves were studied. The 0.2 g L−1 of ferric chloride...
2017 / Shakti P. Jena, Saroj K. Acharya, Harish C. Das, Pragyan P. Patnaik, Shubhra Bajpai -
Dynamic characteristics of Semi-active Hydraulic Engine Mount Based on Fluid-Structure Interaction FEA2015 / Jiande Tian, Xue Jiang, Guozheng Liu, Wenku Shi, Baoquan Liu, et al.
-
Advanced Usage of Inertia Test Stand – Measurement of the Gearbox No-Load Losses2015 / Gabriela Achtenová, Jiří Pakosta