Mechanical engineering topic list of research papers
-
Modeling and analysis of temperature distribution in the multilayer metal composite structures in grinding2017 / V. A. Pashnyov, D. Yu. Pimenov, I. N. Erdakov, M. S. Koltsova, T. Mikolajczyk, et al.
-
Improved method of step length estimation based on inverted pendulum model2017 / Qi Zhao, Boxue Zhang, Jingjing Wang, Wenquan Feng, Wenyan Jia, et al.
-
Development of advanced P/M Ni-base superalloys for turbine disks2014 / Genrikh S. Garibov, Nina M. Grits, Alexey V. Vostrikov, Yelizaveta A. Fedorenko, Alexander M. Volkov
-
Theoretical and practical investigation into the use of a bio-inspired “click” mechanism for the flight motor of a micro air vehicle2017 / Bin Tang, Xia Meng, Fuliang Zhang, Michael J Brennan, Gih-Keong Lau, et al.
-
A residual-energy-activated forwarding protocol using relay ordering and finite field network coding for multiple-source multiple-relay wireless sensor networks2017 / Yulun Cheng, Longxiang Yang, Hongbo Zhu
-
A distributed data secure transmission scheme in wireless sensor network2017 / Wei Liang, Yin Huang, Jianbo Xu, Songyou Xie
-
Vibrational Properties of Sundatang Soundboard2015 / Ronald Yusri Batahong, Jedol Dayou, Semyung Wang, Jongsuh Lee
-
Development of a meso-scale cycloidal-rotor aircraft for micro air vehicle application2017 / Elena Shrestha, Derrick Yeo, Moble Benedict, Inderjit Chopra
-
Performance analysis for a 2 (3HSS+S) parallel manipulator with double moving platforms2016 / Gang Cheng, Zunzhong Zhao, Xianlei Shan
-
Design and Implementation of Cascade LQR Controller for Stabilization of Two-Wheeled Robot2017 / Ts. Slavov, J. Kralev, P. Petkov
-
Economic optimization of a combined heat and power plant: heat vs electricity
Abstract This contribution presents the economical optimization of the parallel repartition between electric and heat production for geothermal application. The 350 m3/h flow of geothermal fluid, assimilated to liquid water at 185°C, is then...
2017 / Fabien Marty, Sylvain Serra, Sabine Sochard, Jean-Michel Reneaume -
A high-order model of rotating stall in axial compressors with inlet distortion
Abstract In this paper, a high-order distortion model is proposed for analyzing the rotating stall inception process induced by inlet distortion in axial compressors. A distortion-generating screen in the compressor inlet is considered. By assuming...
2017 / Peng LIN, Cong WANG, Yong WANG -
Analysis on the design of steel wire wound extrusion containers for hot extrusion process2017 / Changyong Liu, Renji Zhang, Yongnian Yan, Changshi Lao
-
Combined Effects of Pipe Diameter, Reynolds Number and Wall Heat Flux and on Flow, Heat Transfer and Second-Law Characteristics of Laminar-Transitional Micro-Pipe Flows2010 / A. Alper Ozalp
-
Experimental analysis of diffusion absorption refrigerator driven by electrical heater and engine exhaust gas
Abstract This work presents an experimental study of H20-NH3-H2 diffusion absorption refrigeration under two types of energy sources, i.e. the conventional electric energy from grid (electric) and exhaust gas from internal combustion engine. Dynamic ...
2017 / Mohamed Izzedine Serge ADJIBADE, Ababacar THIAM, Christophe AWANTO, Dorothé AZILINON -
An experimental study on cumulative prospect theory learning model of travelers’ dynamic mode choice under uncertainty
Abstract In this paper, we examined travelers’ dynamic mode choice behavior under travel time variability. We found travelers’ inconsistent risk attitudes through a binary mode choice experiment. Although the results deviated from the traditional...
2017 / Chao Yang, Binbin Liu, Lianyan Zhao, Xiangdong Xu -
Welding of Thermomechanically Rolled Steel by Yb:YAG Disk Laser / Spawanie Stali Walcowanej Termomechanicznie Laserem Dyskowym Yb:YAG2016 / A. Lisiecki
-
Influence of rear-roof spoiler on the aerodynamic performance of hatchback vehicle2016 / See-Yuan Cheng, Shuhaimi Mansor
-
Modelling of transient heat transport in metal films using the interval lattice Boltzmann method2016 / A. Piasecka Belkhayat, A. Korczak
-
Some Remarks on Moving Sharp Interfaces
Abstract We deal with some aspects of the general (mathematical) modeling of sharp interfaces (i.e. two-dimensional surfaces within a three-dimensional body) without and with own thermodynamical activity (i.e. with interfacial densities, fluxes and...
2017 / Michael Wolff, Michael Böhm