Mechanical engineering topic list of research papers
-
Research on the Backward Customization Mode and its Operational Framework of Intelligent Product
Abstract With the progress made in network information technology, product intelligence appear to show a trend from external intelligence to internal intelligence, from intelligent manufacturing management to intelligent life cycle management and...
2016 / Taofen Li, Peng Guo, Shuili Yang -
Transmission Theory Analysis of a Dynamic Spiral Combination Lifting Mechanism
Abstract For traditional screw transmission with long stroke length, the long screw is difficult to be processed, and the original space is large. Aiming at making up the defects, a novel dynamic combination screw transmission mechanism is put...
2016 / Faliang Zhou, Xiaojun Xu, Haoyue Zhang, Xiang Zhang -
Research on Straight Line Stability Control Strategy of Four Wheel Drive Vehicle Based on the Sliding Mode Variable Structure Control and Optimization Algorithm
Abstract After the reference of straight line stability control strategy of four-wheel drive vehicle, this paper proposes a control algorithm combining the sliding mode variable structure and optimization control method. The control algorithm is...
2016 / Wang Zhifu, Zhou Yang, Li Chaopeng, Fang Jun -
Energy Demand Reduction in Milling Based on Component and Toolpath Orientations
Abstract Machine tool axis motions are the key movements when milling components and hence it is vital to understand how they influence energy demand in manufacturing. In this research, a systematic study of component and toolpath orientation was...
2016 / Isuamfon F. Edem, Paul T. Mativenga -
Research on the dynamic performance of a C/C composite finger seal in a tilting mode
Abstract The complex operating state of aeroengines has an impact on the performance of finger seals. However, little work has been focused on the issue and the dynamic performance of finger seals is also rarely studied. Therefore, a distributed...
2016 / Hailin Zhao, Guoding Chen, Li'na Wang, Hua Su, Fei Lu -
The Analysis of the Characteristics of Swirl Chamber for Cooling Hot Water2016 / Sergey V. Goldaev, Kseniya B. Tretyakova
-
Product Requirement Information Modeling for the Life Cycle of the Port Hoisting Equipment
Abstract Port hoisting equipment is associated with numerous salient characteristics like loads variation, complicated product composition and higher safety and reliability requirements. In addition to it, requirements of multiple standards are...
2016 / Jian Zhang, Lihong Qiao, Pinxue Rao, Muqi Wulan -
On the Relationship between Cutting Temperature and Workpiece Polymer Degradation During CFRP Edge Trimming
Abstract This research aims to investigate thermal effects generated during conventional CNC machining of polymer-based composites. A sensorised cutting tool incorporating a wireless embedded thermocouple is used to extract tool-side temperature...
2016 / Kevin Kerrigan, Garret E. O’Donnell -
Design and Application of Compliant Mini-Grippers for Handling Chemicals2015 / Daniel Lates, Simona Noveanu, Csibi Vencel
-
State-of-the-art in premixed combustion modeling using flamelet generated manifolds
Abstract Flamelet based chemical reduction techniques are very promising methods for efficient and accurate modeling of premixed flames. Over the years the Flamelet Generated Manifold (FGM) technique has been developed by the Combustion Technology...
2016 / J.A. van Oijen, A. Donini, R.J.M. Bastiaans, J.H.M. ten Thije Boonkkamp, L.P.H. de Goey -
Flame acceleration and deflagration-to-detonation transition in micro- and macro-channels: An integrated mechanistic study
Abstract The integrated processes of flame acceleration, deflagration-to-detonation transition (DDT), and the resulting detonation propagation in micro- and macro-scale channels are simulated. It is found that the modes of flame acceleration and DDT ...
2016 / Wenhu Han, Yang Gao, Chung K. Law -
Improved FRFT-based method for estimating the physical parameters from Newton’s rings
Abstract Newton’s rings are often encountered in interferometry, and in analyzing them, we can estimate the physical parameters, such as curvature radius and the rings’ center. The fractional Fourier transform (FRFT) is capable of estimating these...
2016 / Jin-Min Wu, Ming-Feng Lu, Ran Tao, Feng Zhang, Yang Li -
Effectiveness of Direct Safety Regulations on Manufacturers and Users of Industrial Machines: Its Implications on Industrial Safety Policies in Republic of Korea
Abstract Background Despite considerable efforts made in recent years, the industrial accident rate and the fatality rate in the Republic of Korea are much higher than those in most developed countries in Europe and North America....
2016 / Gi Heung Choi -
Mathematical Modeling of Yarn Dynamics in a Generalized Twisting System2016 / R. Yin, X. M. Tao, B. G. Xu
-
Multi-scale computational homogenisation to predict the long-term durability of composite structures
Abstract A coupled hygro-thermo-mechanical computational model is proposed for fibre reinforced polymers, formulated within the framework of Computational Homogenisation (CH). At each macrostructure Gauss point, constitutive matrices for thermal,...
2016 / Z. Ullah, Ł. Kaczmarczyk, S.A. Grammatikos, M.C. Evernden, C.J. Pearce -
Energy behavior on side structure in event of ship collision subjected to external parameters
Abstract The safety of ships in regards to collisions and groundings, as well as the navigational and structural aspects of ships, has been improved and developed up to this day by technical, administrative and nautical parties. The damage resulting ...
2016 / Aditya Rio Prabowo, Dong Myung Bae, Jung Min Sohn, Bo Cao -
Development of a Torsiometer for On-board Application
Abstract Modern combustion control strategies require accurate combustion control to meet the requirements for pollutant emissions reduction. Optimal combustion control can be achieved through a closed-loop control based on indicated quantities,...
2016 / Vittorio Ravaglioli, Fabrizio Ponti, Enrico Corti, Alberto Cerofolini -
Experimental Validation of Period-n Bifurcations in Milling
Abstract This paper describes numerical and experimental analyses of milling bifurcations, or instabilities. The time-delay equations of motions that describe milling behavior are solved numerically for low radial immersion conditions and Poincaré...
2016 / Andrew Honeycutt, Tony L. Schmitz -
Laser ignition and flame characteristics of pulsed methane jets in homogeneous isotropic turbulence without mean flow
Abstract The influence of turbulence on the minimum ignition energy (MIE) and ignited flame characteristics is investigated for pulsed methane diffusion jets ignited by laser-induced plasma. The methane jet is injected in a volume of homogeneous and ...
2016 / Yonmo Sung, Georgios Charalampous, Yannis Hardalupas, Gyungmin Choi -
Control Algorithm Trajectory Planning for Dual Cooperative Manipulators with Experimental Verification2016 / Ahmed Omar, Pan Ri, Yajun Zhang