Mechanical engineering topic list of research papers
-
Study on the Collaborative Design PN-PDDP Model for the Multi-component Coupling Rotor System Based on Petri Nets
Abstract Based on the analysis of the characteristics for the design process in the complex multi-component coupling rotor system, and considering the fact that the multi-components co-design is demanded in the design process of the...
2016 / Guoyuan Zhang, Feng Ji, Weigang Zhao, Tuanjie Li -
Research on Grinding and Polishing Force Control of Compliant Flange2015 / Chuang Li, Zhenhua Wang, Cheng Fan, Guodong Chen, Ting Huang
-
An experimental system for release simulation of internal stores in a supersonic wind tunnel
Abstract Aerodynamic parameters obtained from separation experiments of internal stores in a wind tunnel are significant in aircraft designs. Accurate wind tunnel tests can help to improve the release stability of the stores and in-flight safety of...
2016 / Wei Liu, Xin Ma, Zhenyuan Jia, Wenbo Lu, Zhengqu Wang, et al. -
Heat Flux Distribution Model in the Cylindrical Grinding Contact Area
Abstract A heat flux distribution model was proposed based on Rayleigh curve for the contact area in cylindrical plunge grinding. In this paper, an embedded thermocouple which can be grind was used to measure the workpiece surface temperature. Based ...
2016 / Jingzhu Pang, Beizhi Li, Yao Liu, Chongjun Wu -
Flow control behind a circular cylinder via a porous cylinder in deep water2013 / B. Gozmen, E. Fırat, H. Akilli, B. Sahin
-
Comprehensive rotor service life study for high & intermediate pressure cylinders of high power steam turbines
Abstract The paper provides a comprehensive scheme for assessment of the residual service life and extension of operating life of steam turbine rotors with expired fleet service life. The residual service life of high temperature rotors for high...
2016 / V. Peshko, O. Chernousenko, T. Nikulenkova, A. Nikulenkov -
On computations of temperature dependent incompressible flows by high order methods2016 / Jan Pech
-
Harmonic Analysis of Cavitation in Engine Cooling Fluid Due to Piston-cylinder Assembly Forces
Abstract The problem with cavitation and possible pitting in internal combustion diesel engines is studied here. Both theoretical and numerical simulation studies are carried out in order to understand the noise and vibration sources using a force...
2016 / Anthony Deku, Peter Nyanor -
The Service Life of the Repair Welded Joint of Cr-Mo / Cr-Mo-V2016 / M. Sroka, A. Zieliński, J. Mikuła
-
Fuel Conversion Benefit of Producer Gas over Gasoline – An Experimental Analysis
Abstract Growing energy targets, depletion of fossil fuels and environmental concerns have paved the way to explore alternative (renewable) fuels. In this paper, the performance and in-cylinder analysis of a four stroke modified spark ignition...
2016 / M.S. Babu, S. Clement, N.K.S. Rajan -
Current assisted superplastic forming of titanium alloy2015 / Guofeng Wang, Tao Zhao, Yuelin Wang, Xuesong Wu, Xiangxiang Dai, et al.
-
Systematic Solving of Machining Deformation and Process Optimization for Complex Thin-walled Parts
Abstract Complex thin-walled parts are widely used in various fields. But they are prone to deform in machining process because of their unique structures. At present, there is a lack of suitable methods to systematically solve this problem and form ...
2016 / Zhiming Cai, Junhao Geng, Chen Zhang, Yule Du -
Dynamic simulation of aerial towed decoy system based on tension recurrence algorithm
Abstract Dynamic model of aerial towed decoy system is established and simulations are performed to research the dynamic characteristics of the system. Firstly, Kinetic equations based on spinor are built, where the cable is discretized into a...
2016 / Dongli Ma, Shaoqi Wang, Muqing Yang, Yongpan Dong -
Effects of side walls on facade flame entrainment and flame height from opening in compartment fires2013 / L.H. Hu, K.H. Lu, F. Tang, M. Delichatsios, L.H. He
-
Video Enriched Pedagogy in Manufacturing Processes
Abstract This paper presents an effective video-assisted pedagogy in manufacturing processes courses. Teaching manufacturing processes is fundamental to manufacturing education. However, the dynamic and complex concepts and phenomenon in...
2016 / Albert Shih, Bruce Tai, Roland Chen, Lei Chen, Yihao Zheng, et al. -
Control of Helical Blade Machining in Whirling
Abstract Machinings of helical blades have recently been increased with manufacturings of aircrafts and energy facilities. The helical blades have generally machined in ball end millings on the multi-axis machining centers. Because high machining...
2016 / Masaki Serizawa, Takashi Matsumura -
Discretized Miller approach to assess effects on boundary layer ingestion induced distortion
Abstract The performance of propulsion configurations with boundary layer ingestion (BLI) is affected to a large extent by the level of distortion in the inlet flow field. Through flow methods and parallel compressor have been used in the past to...
2016 / Esteban Valencia, Víctor Hidalgo, Devaiah Nalianda, Panagiotis Laskaridis, Riti Singh -
Calibration and Distortion Field Compensation of Gradiometer and the Improvement in Object Remote Sensing2016 / Xiangchao Hu, Hongfeng Pang, Liangrui Fu, Dixiang Chen, Mengchun Pan
-
Configuration Optimization of Laser Tracker Stations for Large-scale Components in Non-uniform Temperature Field Using Monte-carlo Method
Abstract The laser trackers play an important role in fabrication and assembly of aircraft, spacecraft and other large-scale products, and optimization of laser tracker configuration station is one of the core issues. When laser trackers are used on ...
2016 / Xusheng Zhu, Lianyu Zheng, Xiaojun Tang -
Effect of Heat Treatment on Machining Properties of the AlSi9Cu3(Fe) Alloy2016 / P. Wieroński, J. Pezda, Ł. Ponikwia