Mechanical engineering topic list of research papers
-
Experimental Investigation on the Performance of Grinding Assisted Electrochemical Discharge Drilling of Glass2016 / V G Ladeesh, R Manu
-
Cascade Utilization of Flue Gas Waste Heat in Combined Heat and Power System with high Back-pressure (CHP-HBP)
Abstract In this study, the cascade utilization of the flue gas waste heat in CHP-HBP was performed. In the proposed system, flue gas of the coal-fired boiler and exhaust steam of the turbine were recovered synthetically. The maximum heat-supply...
2016 / Shifei Zhao, Xiaoze Du, Zhihua Ge, Yongping Yang -
Partial Additive Manufacturing: Experiments and Prospects with Regard to Large Series Production
Abstract Additive manufacturing meets the demand for highly customized and flexible production. However, the physical limitation of the material application rate causes that large volume production of such workpieces is not attractive yet. In order...
2016 / Klaus Dröder, Jakob K. Heyn, Roman Gerbers, Birk Wonnenberg, Franz Dietrich -
Research of Characteristics of Gas-liquid Two-phase Pressure Drop in Microreactor2015 / Dan Li
-
Research on the Immune Monitoring Model of Organic Manufacturing System
Abstract For improving the adaptability of manufacturing system to deal with the complex dynamic problems, the concept of an organic manufacturing system has been proposed. The monitoring technology of organic manufacturing system based on the...
2016 / Qixiang Cai, Dunbing Tang, Haihua Zhu -
Wall pressure signatures of turbulent flow over longitudinal2016 / Hayder A. Abdulbari, Hassan D. Mahammed, Zulkefli B. Yaacob, Wafaa K. Mahmood
-
Numerical Modeling of Freeform Refractive Surfaces Forming Line Radiation Pattern
Abstract The original purpose of the study is to solve the inverse problem of synthesis of freeform optical elements. This article describes a numerical approach for synthesis of freeform refracting surfaces forming a line radiation pattern. ...
2016 / Yana Mazur, Anna Voznesenskaya -
High precision scanning system and test technology of remote sensor2016 / Xiaole Yang, Jianbing Kang, Dongjie Wang, Xin Zhao
-
Research of Machining Vibration Restraint Method for Compressor Blade
Abstract Machining vibration is one of the most important reasons that influences the tool life, machining efficiency and the final surface quality, the performance and the reliability of aero-engine is affected directly by compressor blades. To...
2016 / Zhongxi Zhang, Dinghua Zhang, Ming Luo, Baohai Wu -
The Research on Intelligent Monitoring Technology of NC Machining Process
Abstract According to the current situation and problems of CNC machine tool monitoring technology, we discuss the intelligent monitoring technology development and CPS features, and propose a four-layer architecture CPS NC machining process...
2016 / Xiao Hua Li, Wen Yi Li -
Development of Multi-degrees of Freedom Optical Table Dynamometer
Abstract Accurate measurements of cutting forces are critical in machining operations for maximizing production, detecting tool wear and failure, adaptive control and monitoring. Traditionally, cutting forces are measured using piezoelectric quartz...
2016 / Allen Sandwell, Chaneel Park, Simon Park -
The study of stability, combustion characteristics and performance of water in diesel emulsion fuel2016 / Zulkifli Syafiq, Othman Fahmi, Omar. I Awad, Abdullah Adam
-
The influence of auxiliary gases in the optimized analysis of pulsed laser grooving of a C70S6 connecting rod for fracture splitting
Abstract Controlled fracture splitting technology has great potential in processing the splitting parts such as engine connecting rod, and the pulsed laser processing of notches for fracture splitting, which is crucial for controlling the fracture...
2017 / S.Q. Kou, Y. Gao, W.Q. Gao -
A Comprehensive System for Digital Assembly Precision Simulation and Optimization of Aircraft
Abstract Aircraft is a complex product, and it is made by assembling many parts. There are different types of links, bolts, pins are widely used to join the components of this assembly. Assembly precision analysis is an effective means to check the...
2016 / Dongping Zhao, Xitian Tian, Junhao Geng -
Numerical and experimental investigation of swirling flow in a conical diffuser2015 / Štefan David, Zubík Pavel, Hudec Martin, Rudolf Pavel
-
Performance Analysis of a Common-rail Diesel Engine Fuelled with Different Blends of Waste Cooking oil and Gasoil
Abstract An experimental campaign was performed to study the behavior of a common-rail Diesel engine in automotive configuration when it is fuelled with blends of Diesel fuel (DF) and waste cooking oil (WCO). In particular the tested fuels are: B20...
2016 / Alessandro Corsini, Riccardo Di Antonio, Giuseppe Di Nucci, Andrea Marchegiani, Franco Rispoli, et al. -
Research on characteristics of tool wear in laser heating and ultrasonic vibration cutting of tungsten carbide2016 / F. Jiao, Y. Niu, M.-j. Zhang, C.-j. Zhang
-
Target for heat capacity consumption that considers safety, energy savings, and comfort: a room heat capacity model using a two-phase difference integration method2016 / Tsuyoshi Kitsuya, Wei Zang, Satoshi Kumagai, Shuuzou Kishima
-
Machining of Micro Rotational Parts with Wire EDM Machine
Abstract An optimized long aspect radio micro rotary parts machining process was proposed based on common wire EDM machine. By adding a precise rotary spindle to a conventional three axis CNC wire EDM machine, it can be extended to perform the...
2016 / Yingmou Zhu, Tongsheng Liang, Lin Gu, Wansheng Zhao -
Asymmetric transmission of acoustic waves in a layer thickness distribution gradient structure using metamaterials2016 / Jung-San Chen, I-Ling Chang, Wan-Ting Huang, Lien-Wen Chen, Guan-Hua Huang