Mechanical engineering topic list of research papers
-
Assessment of Interface Shear Behaviour of Sub-ballast with Geosynthetics by Large-scale Direct Shear Test
Abstract A series of large-scale direct shear test were conducted to study the interface shear strength of subballast reinforced with different types of geomembranes and geogrids. The impact of normal stress (σn), shearing rate (SR), relative...
2016 / M. Mahdi Biabani, Buddhima Indraratna, Sanjay Nimbalkar -
The Contribution of Thermal Energy Storage to the Energy Efficiency of Combined Cooling, Heating and Power Systems
Abstract Combined cooling, heating, and power (CCHP) is considered a promising technology. Because thermal demand varies strongly with time (and can even be discontinuous), the power generation in CCHP systems can be inefficient and significant heat ...
2016 / Shilin Qu, Fei Ma, Xu Ge, Dongxu Wang -
Combined experimental and flexible multi-body dynamic investigation of high-energy impact-induced driveline vibration2016 / R. Turnbull, O. Miknas, M. Mohammadpour, H. Rahnejat
-
Numerical analysis of added resistance on blunt ships with different bow shapes in short waves2016 / Kyung-Kyu Yang, Yonghwan Kim
-
Tribological behavior of aeronautical steel under oil-air lubrication containing extreme-pressure and anti-wear additives2016 / W. Guan, H. Zhou, B. Wang, Y. Xia, W. Liu
-
Fully coupled EHL model for simulation of finite length line cam-roller follower contacts
Abstract This paper presents a fully coupled multiphysics model developed for numerical simulation of the elastohydrodynamically lubricated contact between a cam and roller, typically found in cam mechanisms controlling fuel injection in an internal ...
2016 / M. Shirzadegan, A. Almqvist, R. Larsson -
Thermo-Mechanical Behavior of the Continuous Casting Bloom in the Heavy Reduction Process2016 / Cheng Ji, Chen-hui Wu, Miao-yong Zhu
-
Wing aeroelasticity analysis based on an integral boundary-layer method coupled with Euler solver
Abstract An interactive boundary-layer method, which solves the unsteady flow, is developed for aeroelastic computation in the time domain. The coupled method combines the Euler solver with the integral boundary-layer solver (Euler/BL) in a...
2016 / Yanfeng Ma, Erming He, Xianang Zeng, Junjie Li -
Unbalance and resonance elimination with active bearings on a Jeffcott Rotor
Abstract In this contribution we have proven theoretically and practically that active bearings are able to eliminate both bearing forces and the resonance of a Jeffcott Rotor system. Active bearings can displace a rotor such that its center of mass ...
2016 / Stefan Heindel, Fabian Becker, Stephan Rinderknecht -
New Heating System Development Working with Waste Heat for Electric Vehicles
Abstract Researches carried about electric vehicles are focused on extending life of the battery today. Development of higher-range batteries is as essential as efficient use of current battery energy technology. EPT System, that has average...
2016 / Hasan Ayartürk, Emre Doruk, İsmail Durgun, Kemal Ekbiç -
Static metal sealing mechanism of a subsea pipeline mechanical connector2016 / Z. Wei, L. Wang, Y. Guan, S. Yao, S. Li
-
The Indoor Thermal Environment Simulation and Testing Validation of a Power Plant Turbine Room in Extreme Cold Area
Abstract This paper conducts an analysis study on indoor thermal environment of a steam turbine room in power plant by CFD. Refer to a typical steam turbine room in an actual thermal power plant which has been conducted field test, the typical...
2016 / Guofu Du, Meiying Lei, Xi Chen, Congxin Huang, Yanjie Lv, et al. -
Dynamics of a novel robotic leg based on the Peaucellier-Lipkin mechanism on linear paths during the transfer phase2016 / D. A. Nunez-Altamirano, I. Juarez-Campos, L. Marquez-Perez, O. Flores-Diaz, L. Romero-Munoz
-
Finite element analysis of double-diffusive natural convection in a porous triangular enclosure filled with Al2O3-water nanofluid in presence of heat generation
Abstract The problem of double-diffusive natural convection of Al2O3 -water nanofluid in a porous triangular enclosure in presence of heat generation has been studied numerically in this paper. The bottom wall of the cavity is...
2016 / Raju Chowdhury, Salma Parvin, Md. Abdul Hakim Khan -
Flow Field Predictions of Bluff Body Introduced Micro Combustor
Abstract Combustion in micro scale is the area having wide scope in this era of miniaturization of energy efficient devices. Some important areas of application are in the field of propulsion as a micro thruster and as an apt replacement for...
2016 / C.G. Sarath, M. Sreejith, R.V. Reji -
Efficiency analysis of bubble pulsation formed by high-voltage discharge in nonfree field water2016 / D. Yan, D. Bian, J. Zhao, Z. Yin, S. Jia, et al.
-
Compensation of Thermo-mechanically Induced Workpiece and Tool Deformations During Dry Turning
Abstract Dry turning is accompanied by considerable process-induced deformations of the workpiece and the tool. Such deformations decrease the accuracy of machining. In this paper, finite element models are used in order to calculate the...
2016 / Marco Zimmermann, Stefan Schindler, Paul Steinmann, Jan C. Aurich -
Configuration Optimization with Operation Strategy of Solar-assisted Building Cooling Heating and Power System to Minimize Energy Consumption
Abstract This work designs a novel hybrid building cooling heating and power (BCHP) system incorporating with solar energy and natural gas. A basic natural gas BCHP system containing power generation unit, heat recovery system, hybrid cooling system ...
2016 / Jiangjiang Wang, Tianzhi Mao, Chao Dou -
Solid-state recycling of light metals: A review2016 / S. Shamsudin, M. Lajis, Z. Zhong
-
Adaptive positioning control of an ultrasonic linear motor system
Abstract A 3PRR parallel precision positioning system, driven by three ultrasonic linear motors, was designed for use as the object stage of a scanning electron microscope (SEM). To improve the tracking accuracy of the parallel platform, the...
2016 / Jia-Si Mo, Zhi-Cheng Qiu, Jun-Yang Wei, Xian-Min Zhang