Mechanical engineering topic list of research papers
-
Experience of the Diesel Engine Cooling System Simulation
Abstract The cooling system of the designed diesel engine was investigated using specially prepared models. For selected initializations of a cooling fluid in the available cooling jacket, quantitative estimates of the levels of the heat flow to the ...
2016 / V.A. Romanov, N.A. Khozeniuk -
Geometrical optimization of a swirling Savonius wind turbine using an open jet wind tunnel
Abstract It has been suggested that waste heats or naturally available heat sources can be utilized to produce swirling flow by a design similar to that of split channels which is currently used to initiate fire whirls in laboratories. The new...
2016 / Abdullah Al-Faruk, Ahmad Sharifian -
Influence of the of electrical discharge alloying methods on the surface quality of carbon steel2016 / S. Spadło, P. Młynarczyk, K. Łakomiec
-
Design for Product Service Supportability (DfPSS) Approach: A State of the Art to Foster Product Service System (PSS) Design
Abstract Product-Service System lifecycle is characterized by several phases from the initial concept to the final disposal. However, as for conventional products, the profit generation and the market success of PSSs critically depend on the...
2016 / Claudio Sassanelli, Giuditta Pezzotta, Fabiana Pirola, Sergio Terzi, Monica Rossi -
Understanding and elimination of process defects in narrow gap multi-pass fiber laser welding of ferritic steel sheets of 30 mm thickness2016 / Jiecai Feng, Wei Guo, Neil Irvine, Lin Li
-
Numerical analysis of the characteristics of waves propagating in arbitrary ice-covered sea2007 / Toshinori Ogasawara, Shigeki Sakai
-
Energy Optimization by Parameter Matching for a Truck-mounted Concrete Pump
Abstract Aiming at the shortages of low efficiency and large fuel consume of a truck-mounted concrete pump, a global power matching method are proposed based on both fuel consume rate of the engine and efficiency of the hydraulic pump. The...
2016 / Ye Min, Yi Xiaogang, Jiao Shengjie -
Energy Management Optimization for a Hybrid Tracked Vehicle Using the Radau Pseudospectral Method
Abstract This study explored the feasibility of using the Radau pseudospectral method (RPM) to optimize the energy management strategy for a hybrid tracked vehicle. The engine–generator set and the battery pack of the serial hybrid tracked vehicle...
2016 / Shouyang Wei, Yuan Zou, Fengchun Sun, Onder Christopher -
Surface quality analysis of die steels in powder-mixed electrical discharge machining using titan powder in fine machining2016 / B. T. Long, N. H. Phan, N. Cuong, N. D. Toan
-
Experimental investigation on CI engine performance using steam injection and ferric chloride as catalyst
Abstract The present investigation pertains to running a diesel engine with diesel as the main fuel and diesel-ferric chloride (FeCl3), diesel-steam injection, and diesel-FeCl3-steam injection combinations. In order to conduct the experiment, engine ...
2016 / P.P. Patnaik, S.K. Acharya, D. Padhi, U.K. Mohanty -
A Lagrangian cell-centred finite volume method for metal forming simulation2016 / P. Cardiff, Ž. Tuković, P. De Jaeger, M. Clancy, A. Ivanković
-
Design methodology for trailing-edge high-lift mechanisms2016 / David Zaccai, Francesco Bertels, Roelof Vos
-
Effect of infra‐red power level on the sintering behaviour in the high speed sintering process2008 / C.E. Majewski, D. Oduye, H.R. Thomas, N. Hopkinson
-
Improved quaternion-based integration scheme for rigid body motion2016 / L. J. H. Seelen, J. T. Padding, J. A. M. Kuipers
-
Shockwave Suppression by Vehicle-to-Vehicle Communication
Abstract The rapid development of wireless communication and information technologies has increased research interests in inter-vehicle communication systems and their effect on traffic flow. One of the most complex traffic phenomena on freeways are ...
2016 / Nassim Motamedidehkordi, Martin Margreiter, Thomas Benz -
Estimation of the active grains load in different kinematic variations of the internal cylindrical grinding process2016 / Krzysztof Nadolny
-
Higher-order constraints for higher kinematic pairs and their application to mobility and shakiness analysis of mechanisms2016 / Andreas Müller
-
Effect of stiffness and thickness ratio of host plate and piezoelectric patches on reduction of the stress concentration factor2016 / Javad Jafari Fesharaki, Seyed Ghasem Madani, Sa’id Golabi
-
Type synthesis to design variable camber mechanisms2016 / G. Li, Z. Miao, B. Li, Y. Hu
-
Aeroelastic simulations of stores in weapon bays using Detached-Eddy Simulation
Abstract Detached-Eddy Simulations of flows in weapon bays with a generic store at different positions in the cavity and with flexible fins are presented in this paper. Simulations were carried out to better understand the fluid–structure...
2016 / S.V. Babu, G.J.M. Loupy, F. Dehaeze, G.N. Barakos, N.J. Taylor