Mechanical engineering topic list of research papers
-
Numerical Study on Super/Hypersonic Flow, Mixing, and Combustion Phenomena2014 / B. Wang, X. Y. Hu, X. Li, Q. Wang
-
Compositional Simulation on the Flow of Polymeric Solution Alternating CO2 through Heavy Oil Reservoir2014 / M. S. Jeong, J. Cho, J. Choi, J. H. Lee, K. S. Lee
-
Noise Removal in Color Images Based on Image Gradient Information2014 / R. Zhang, W. He
-
Simulation of Broadband Noise Sources of an Axial Fan under Rotating Stall Conditions2014 / L. Zhang, R. Wang, S. Wang
-
Optimization Design of a Double-Channel Pump by Means of Orthogonal Test, CFD, and Experimental Analysis2014 / B. Zhao, D. Hou, H. Chen, Y. Wang, J. Qiu
-
Analysis of the Forces in Micromilling of Hardened AISI H13 Steel with Different Grain Sizes Using the Taguchi Methodology2014 / C. H. Lauro, L. C. Brandao, S. L. M. Ribeiro Filho, D. Baldo
-
Using of Multiwall Carbon Nanotube Based Nanofluid in the Heat Pipe to Get Better Thermal Performance2014 / Y. Bakhshan, S. M. Aval, F. Kamel, A. Hajhossini
-
Large Eddy Simulation of Supersonic Boundary Layer Transition over a Flat-Plate Based on the Spatial Mode2014 / S. Wang, Z. Gao, C. Lee, J. Lei
-
Interior Ballistics Two-Phase Reactive Flow Model Applied to Large Caliber Guided Projectile-Gun System2014 / M. Rashad, X. Zhang, H. El Sadek
-
Dynamic Control and Disturbance Estimation of 3D Path Following for the Observation Class Underwater Remotely Operated Vehicle2013 / H. Huang, Q. Tang, Y. Li, L. Wan, Y. Pang
-
Path Planning for Detection Robot Climbing on Rotor Blade Surfaces of Wind Turbine Based on Neural Network2013 / B. Wang, H. Luo, Y. Jin, M. He
-
Enhanced Sliding Mode Control with CEMF Compensation for Tracking Control of a Piezoactuated Flexure-Based Mechanism2014 / C.-J. Lin, C.-R. Lin, S.-K. Yu, C.-R. Hsu
-
The Precollision Trajectory Planning of Redundant Space Manipulator for Capture Task2014 / L. Zhang, Q. Jia, G. Chen, H. Sun
-
Differential Speed Rolling to Reduce Warping in Bimetallic Slab2014 / C. H. Lee, J. P. Park, Y. H. Moon
-
Influence of Tool Shape on Hole Clinching for Carbon Fiber-Reinforced Plastic and SPRC4402014 / S.-H. Lee, C.-J. Lee, K.-H. Lee, J.-M. Lee, B.-M. Kim, et al.
-
The Dynamic Characteristic Analysis of the Water Lubricated Bearing-Rotor System in Seawater Desalination Pump2014 / X. Ye, J. Wang, D. Zhang, J. Hu, Y. Feng
-
Digital Manufacturing and Cloud Manufacturing2013 / Z. Zhou, J. Fuh, S. Xie, Z. Jiang
-
A Two-Level Task Scheduler on Multiple DSP System for OpenCL2014 / L. Tian, C. Meng, F. Zhou
-
Cooling Systems Design in Hot Stamping Tools by a Thermal-Fluid-Mechanical Coupled Approach2014 / T. Lin, H.-W. Song, S.-H. Zhang, M. Cheng, W.-J. Liu
-
Test of Robot Distance Error and Compensation of Kinematic Full Parameters2014 / T. Zhang, L. Du, X. Dai