Mechanical engineering topic list of research papers
-
3D Acoustic Modelling of Dissipative Silencers with Nonhomogeneous Properties and Mean Flow2014 / E. M. Sanchez-Orgaz, F. D. Denia, J. Martinez-Casas, L. Baeza
-
An Approach on Fault Detection in Diesel Engine by Using Symmetrical Polar Coordinates and Image Recognition2014 / R. Zeng, L. Zhang, Y. Xiao, J. Mei, B. Zhou, et al.
-
Applications of the Exponential Function of the Euclidean Motion Group to the Theory of Gearing2014 / B. Lei, H. Lowe, X. Wang
-
Improvement of Weldment Properties by Hot Forming Quenching of Friction Stir Welded TWB Sheet2014 / D.-H. Ko, J.-H. Kim, D.-C. Ko, B.-M. Kim
-
Development of a New Platoon Dispersion Model considering Turning Vehicles in Urban Road Environment2014 / Y. Bie, Z. Liu, Y. Li, Y. Pei
-
Second-Order Nonlinear Analysis of Steel Tapered Beams Subjected to Span Loading2014 / A. Hadidi, B. F. Azar, H. Z. Marand
-
Newly Developed Empirical Correlations for Simulation of Transitional Flows2013 / R. Taghavi Zenouz, M. Etemadi
-
Formation and Growth Mechanism of Globular Crystal of ADC12 Aluminum Alloy by Near-Liquidus Squeeze Casting2014 / S.-z. Wang, Z.-s. Ji, S. Sugiyama, J. Yanagimoto
-
Selecting Optimal Measurement Poses for Kinematic Calibration of Industrial Robots2014 / J. Zhou, H.-N. Nguyen, H.-J. Kang
-
The Effect of Various Test Parameters on the Steady Flow Test Results of a Four-Valve Spark Ignition Engine: A Tentative Approach toward Standardization2013 / A. Mohammadebrahim, M. B. Shafii, S. K. Hannani
-
Forward and Reverse Movements of a Linear Positioning Stage Based on the Parasitic Motion Principle2014 / H. Huang, H. Zhao
-
Analysis of Grinding Force and Elastic Deformation in Thread Grinding Process2013 / W. Wang, X. Feng
-
A "Model to Model" Collaborative Perception Methodology for Distributed Design2014 / N. Wan, K. Du, R. Mo, G. Xie
-
Shift Performance Test and Analysis of Multipurpose Vehicle2014 / C. Yang, L. Hua, Z. Wang, Y. He
-
Experimental Study on Intelligent Control Scheme for Fan Coil Air-Conditioning System2013 / Y. Li, J. Bian, N. Zhang, J. Li
-
Recursive Formulation for Dynamic Modeling and Simulation of Multilink Spatial Flexible Robotic Manipulators2013 / Z. Qian, D. Zhang, J. Liu
-
Inner-Learning Mechanism Based Control Scheme for Manipulator with Multitasking and Changing Load2014 / F. Xue, J. Xiang, N. Li
-
Research on Hybrid Isolation System for Micro-Nano-Fabrication Platform2014 / J. Fu, Y. Wang, P.-d. Li, M. Yu
-
Unsteady Pressure Pulsation and Rotating Stall Characteristics in a Centrifugal Pump with Slope Volute2014 / N. Zhang, M. Yang, B. Gao, Z. Li, D. Ni
-
Design and Analysis of a Split Deswirl Vane in a Two-Stage Refrigeration Centrifugal Compressor2014 / J.-M. Huang, Y.-H. Tsai