Mechanical engineering topic list of research papers
-
The Wear Analysis Model of Drill Bit Cutting Element with Torsion Vibration2015 / J. Tian, C. Fu, L. Yang, Z. Yang, X. Pang, et al.
-
Dynamic Mechanical Behaviors of 6082-T6 Aluminum Alloy2013 / P. Yibo, W. Gang, Z. Tianxing, P. Shangfeng, R. Yiming
-
Torque Ripple Suppression in an External-Meshed Magnetic Gear Train2013 / Y.-C. Wu, W.-T. Tseng, Y.-T. Chen
-
A Component-Based Modeling and Validation Method for PLC Systems2014 / R. Wang, Y. Guan, M. Zhou, J. Zhang, X. Song
-
Study on Telescope Gain Affected by a Multilevel Hybrid Mechanism in FAST2014 / X. Chai, J. Fan, L. Zhou, B. Peng
-
Monitoring Technology for Vehicle Loading Status Based on the Analysis of Suspension Vibration Characters2014 / S. Li, X. Yao, Z. Yang, L. Wang, W. Sun
-
Experimental Investigation on Characteristics of Flow Instabilities in Centrifugal Pump Impeller under Part-Load Conditions2014 / D. Wu, Y. Ren, H. Liu, J. Mu, L. Jiang
-
Modeling and Analysis of a Semiactive Power-Assisted Unit Based on Hydraulic Accumulator2013 / M. Xu, G. Chen, J. Ni, Y. Liu
-
Feasibility Study on Flexibly Reconfigurable Roll Forming Process for Sheet Metal and Its Implementation2014 / J.-S. Yoon, J. Kim, H.-H. Kim, B.-S. Kang
-
Prediction of solar radiation for solar systems by using ANN models with different back propagation algorithms
Abstract Global solar radiation (GSR) is an essential parameter for the design and operation of solar energy systems. Long-standing records of global solar radiation data are not available in many places because of the cost and maintenance of the...
2016 / Neelamegam Premalatha, Amirtham Valan Arasu -
Simultaneous Topology and Size Optimization of 2D and 3D Trusses Using Evolutionary Structural Optimization with regard to Commonly Used Topologies2014 / P. Tom i, J. Duhovnik
-
Accurate Tooth Lead Crowning without Twist in Cylindrical Helical Gear Grinding2014 / H. Zhang, C. Fang, X. Huang
-
Dynamic Modeling and Analysis of Hub-Tapered Beam System2013 / S.-j. Chen, D.-g. Zhang
-
Modeling and Optimization of a Friction Damper for Boring Chatter Control2014 / M. Wang, T. Zan, X. Gao
-
Investigation of the Effects of Machining Parameters on Material Removal Rate in Abrasive Waterjet Turning2014 / I. Zohourkari, M. Zohoor, M. Annoni
-
Multiobjective Optimization for the Impeller of Centrifugal Fan Based on Response Surface Methodology with Grey Relational Analysis Method2014 / F. Meng, Q. Dong, P. Wang, Y. Wang
-
The Fabrication and Application of a PDMS Micro Through-Holes Mask in Electrochemical Micromanufacturing2014 / X. Chen, N. Qu, H. Li, D. Zhu
-
Numerical Study of Thermal Radiation Effect on Confined Turbulent Free Triangular Jets2013 / K. Parham, E. Esmaeilzadeh, A. Siahsarani, O. P. Agboola
-
Experimental Research into Technology of Abrasive Flow Machining Nonlinear Tube Runner2014 / J. Li, L. Yang, W. Liu, X. Zhang, F. Sun
-
Finite-Time Vibration-Attenuation Controller Design for Structural Systems with Parameter Uncertainties2014 / Y. Ding, F. Weng, J. Ge, L. Liang, G. Yang