Mechanical engineering topic list of research papers
-
Trajectory tracking control of an underactuated unmanned underwater vehicle synchronously following mother submarine without velocity measurement2015 / J. Xu, M. Wang, G. Zhang
-
Evaluation on the hot workability of as-extruded TA2 pure titanium using processing map2016 / F. Li, Y. Wang, Y. Luo, X. Yan
-
Power Evaluation of High Intensity Focused Ultrasound Transducer Based on Acoustic Filed Measurement in Pre-focal Region
Abstract A novel technique for measurement of high intensity focused ultrasound output power of a transducer was introduced in this study. A needle point hydrophone, which was fixed in the pre-focal region of the transducer by a scanning system, was ...
2015 / Cheng Wang, Huifeng Zheng, Yuebing Wang, Yonggang Cao -
Pedestrian Flow Characteristic of Metro Station along with the Mall
Abstract When metro station is connected with shopping mall the pedestrian flow is huge. Passenger from the mall who carries luggage brings large fire load into the metro station. In this thesis three typical metro stations are chosen to measure the ...
2016 / Zhe Zhao, Dong Liang -
Characteristics of transonic moist air flows around butterfly valves with spontaneous condensation
Abstract Effects of spontaneous condensation of moist air on the shock wave dynamics around butterfly valves in transonic flows are investigated by experimental and numerical simulations. Two symmetric valve disk shapes namely- a flat rectangular...
2015 / A.B.M. Toufique Hasan, S. Matsuo, T. Setoguchi -
A study of Transient Performance of A Cascade Heat Pump System
Abstract Transient performance of a cascade heat pump system is experimentally investigated. The cascade heat pump consists of 4 systems: the chilled water system, the low-temperature refrigeration cycle using R22, the high-temperature heat pump...
2015 / Piman Nenkaew, Chittin Tangthien -
Accelerated Life Testing to Predict Service Life and Reliability for an Appliance Door Hinge
Abstract Appliance manufacturers have traditionally performed physical testing using prototypes to assess reliability and service integrity of new product designs. However, for white goods where service lives are measured in years or decades, the...
2015 / Seunghyeon Cheon, Hyunsoo Jeong, So Young Hwang, Seokmoo Hong, Joseph Domblesky, et al. -
Sensors Based Measurement Techniques of Fuel Injection and Ignition Characteristics of Diesel Sprays in DI Combustion System
Abstract Innovative sensor based measurement techniques like needle lift sensor, photo (optical) sensor and piezoresistive pressure transmitter are introduced and used to measure the injection and combustion characteristics in direct injection...
2016 / S. Rehman -
Numerical study on condensation heat transfer of trapezoid grooved surfaces2016 / B. Qi, Z. Song, X. Li
-
Fatigue properties of 6061-T6 aluminum alloy butt joints processed by vacuum brazing and tungsten inert gas welding2016 / H. Lin, J.-R. Hwang, C.-P. Fung
-
Modeling and analysis of transient temperature field in finite thickness plate under symmetrically located moving heat sources2015 / C. Xiong, B. Ma, H. Li, F. Zhang, Y. Wang
-
Unsteady natural convection heat transfer in a nanofluid-filled square cavity with various heat source conditions2016 / M. T. Nguyen, A. M. Aly, S.-W. Lee
-
Rigid Dynamic Model and Analysis of 5-DOF Parallel Mechanism2015 / Xiulong Chen, Xiaoxia Liang, Yu Deng, Qing Wang
-
Monitoring the condition of the cutting tool using self-powering wireless sensor technologies2016 / V. Ostasevicius, V. Jurenas, V. Augutis, R. Gaidys, R. Cesnavicius, et al.
-
Development of Motion Navigator II Enabling Integrated Motion Display of Whole Body with Fingers
Abstract In this study, we build a new system “Motion Navigator II”, which displays finger motion integrated with whole body motion with bone CG animation by AR. The function to display whole body motion is inherited from an existing motion skill...
2014 / Yuta Sato, Kazuki Hirota, Masato Soga, Hirokazu Taki -
A Concept for the Consideration of Dimensional and Geometrical Deviations in the Evaluation of the Internal Clearance of Roller Bearings
Abstract Internal clearance is a functional key characteristic of bearings. The bearing clearance can be evaluated using rigid body movements of the inner ring. Due to the deviations of dimension and roundness the contact areas between the bearing...
2016 / Alexander Aschenbrenner, Sandro Wartzack -
Application of the multi-kernel non-negative matrix factorization on the mechanical fault diagnosis2015 / Y. Yang, Y. Zhang, Y. Zhu
-
Introducing Design for Verification
Abstract Traditionally, the single purpose of the design of a workpiece has been its final use. In some cases, this design is adapted to the manufacturing process, as for example casting. However, verification is not considered in the design. In...
2015 / C. Cajal, J. Santolaria, R. Acero, M. Pueo -
Performance Analysis of a Novel Cascade Integrated Solar Combined Cycle System
Abstract This paper proposed a novel cascade integrated solar combined cycle system, in which concentration solar collector (e.g. parabolic troughs) as direct steam generator and non-concentration collector (e.g. evacuated tubes) are hybrid with...
2015 / Yuanyuan Li, Jing Yuan, Yongping Yang -
Optimal Integration of the Flue Gas Heat for the Minimization of the Energy Penalty of Oxy-fired Power Plants
Abstract Oxy-fired coal power plants require the recycling of flue gas to dilute the oxygen in order to moderate the combustion in the boiler. This induces a significant structural modification of the boiler and flue gas train compared to air-fired...
2014 / Hayato Hagi, Maroun Nemer, Yann Le Moullec, Chakib Bouallou