Mechanical engineering topic list of research papers
-
Development of a Process Data-based Strategy for Conditioning Position-controlled ID Cut-off Grinding Wheels in Silicon Wafer Manufacturing
Abstract Manufacturing technologies in the semiconductor industry put high demands on accuracy, especially for the initial steps of wafering. ID grinding has established itself as a cost-effective manufacturing method for the production of wafers...
2017 / Uwe Teicher, Wolfgang Dietz, Andreas Nestler, Alexander Brosius -
A new estimate technology of non-invasive continuous blood pressure measurement based on electrocardiograph2016 / Chung-Min Wu, Chueh Yu Chuang, Yeou-Jiunn Chen, Shih-Chung Chen
-
Satellite lithium-ion battery remaining useful life estimation with an iterative updated RVM fused with the KF algorithm
Abstract Lithium-ion batteries have become the third-generation space batteries and are widely utilized in a series of spacecraft. Remaining Useful Life (RUL) estimation is essential to a spacecraft as the battery is a critical part and determines...
2017 / Yuchen SONG, Datong LIU, Yandong HOU, Jinxiang YU, Yu PENG -
Analysis and improvement of the comfort performance of a car’s indoor environment based on the predicted mean vote–predicted percentage of dissatisfied and air age2017 / Bingli Zhang, Tielong Xue, Ning Hu
-
Development of ZL400 Mine Cooling Unit Using Semi-Hermetic Screw Compressor and Its Application on Local Air Conditioning in Underground Long-Wall Face2017 / Zhaoxiang Chu, Jianhu Ji, Xijun Zhang, Hongyuan Yan, Haomin Dong, et al.
-
Tracking performance and global stability guaranteed neural control of uncertain hypersonic flight vehicle2017 / Tao Teng, Chenguang Yang, Shi-Lu Dai, Min Wang
-
Particulate Matter Emission from Dual Fuel Diesel Engine Fuelled with Natural Gas2017 / Zdzisław Stelmasiak, Jerzy Larisch, Jacek Pielecha, Dariusz Pietras
-
Turbulence-induced noise of a submerged cylinder using a permeable FW–H method2016 / Woen-Sug Choi, Yoseb Choi, Suk-Yoon Hong, Jee-Hun Song, Hyun-Wung Kwon, et al.
-
Modeling and control for cooperative transport of a slung fluid container using quadrotors
Abstract In this paper, dynamic modeling and control problem for transfer of a sloshing liquid container suspended through rigid massless links from a team of quadrotors are investigated. By the proposed solution, pose of the slung container and...
2017 / Hassan SAYYAADI, Ali SOLTANI -
Research on the safety assessment of the brushless DC motor based on the gray model2017 / Jinquan Xuan, Xiaohong Wang, Dawei Lu, Lizhi Wang
-
Nonlinear hybrid control design of three-joint dual finger robots2017 / Yung-Yue Chen, Tzu-Ching Chang, Yung Hsiang Chen, Qi-Xian Chen
-
Remaining useful life prediction based on variation coefficient consistency test of a Wiener process
Abstract High-cost equipment is often reused after maintenance, and whether the information before the maintenance can be used for the Remaining Useful Life (RUL) prediction after the maintenance is directly determined by the consistency of the...
2017 / Juan LI, Bo JING, Hongde DAI, Xiaoxuan JIAO, Xiaodong LIU -
Central pattern generator and feedforward neural network-based self-adaptive gait control for a crab-like robot locomoting on complex terrain under two reflex mechanisms2017 / Gang Wang, Xi Chen, Shi-Kai Han
-
Efficient prediction of ground noise from helicopters and parametric studies based on acoustic mapping
Abstract Based on the acoustic mapping, a prediction model for the ground noise radiated from an in-flight helicopter is established. For the enhancement of calculation efficiency, a high-efficiency second-level acoustic radiation model capable of...
2017 / Fei WANG, Guohua XU, Yongjie SHI -
Simulative technology for auxiliary fuel tank separation in a wind tunnel
Abstract In this paper, we propose a simulative experimental system in wind tunnel conditions for the separation of auxiliary fuel tanks from an aircraft. The experimental system consists of a simulative release mechanism, a scaled model and a pose...
2016 / Xin Ma, Wei Liu, Ling Chen, Xiao Li, Zhenyuan Jia, et al. -
Interconnection and damping assignment passivity-based control for a compass-like biped robot2017 / VÍctor de-León-Gómez, Víctor Santibañez, Jesús Sandoval
-
Pressure effects on flame structures and chemical pathways for lean premixed turbulent H 2 /air flames: Three-dimensional DNS studies
Abstract This paper presents three-dimensional direct numerical simulations of lean premixed turbulent H2/air flames over a range of pressures using a detailed chemical mechanism. Effects of pressure on flame front structures and heat release from...
2017 / Xujiang Wang, Tai Jin, Yongliang Xie, Kai Hong Luo -
Curvilinear Squeeze Film Bearing Lubricated with a Dehaven Fluid or with Similar Fluids2017 / A. Walicka, P. Jurczak, J. Falicki
-
Modeling and experimental validation of lever-based electromechanical actuator for dry clutches2017 / Fengyu Liu, Li Chen, Chengliang Fang, Chengliang Yin, Xi Zhang
-
Performance analysis of a complex queueing system with vacations in random environment2017 / Jianjun Li, Liwei Liu