Mechanical engineering topic list of research papers
-
Cooling and Dehumidification Capacity Chart of Surface Air Cooler in Air Conditioning
Abstract Traditionally, indoor condition is characterized by the psychrometric chart which is independent of the abilities of an air-conditioning unit. In present paper, the cooling and dehumidification abilities of an air-conditioning unit are...
2015 / Xu Song, Tong Zhu, Dijun Zhuang, Chunsheng Wang, Bo Yao -
Platform for Real-Time Simulation of Dynamic Systems and Hardware-in-the-Loop for Control Algorithms2014 / Isaac de Souza, Sergio Natan, Rafael Teles, Marcelo Fernandes
-
Effects of Different Heat Treatment on Microstructure, Mechanical and Conductive Properties of Continuous Rheo-Extruded Al-0.9Si-0.6Mg (wt%) Alloy2015 / Di Tie, Ren-guo Guan, Ning Guo, Zhouyang Zhao, Ning Su, et al.
-
Computational Approach to Seasonal Changes of Living Leaves2013 / Ying Tang, Dong-Yan Wu, Jing Fan
-
A visual tool for accessibility study of pipeline maintenance during design2014 / Chu-Hsuan Lee, Meng-Han Tsai, Shih-Chung Kang
-
Consolidation by Prefabricated Vertical Drains with a Threshold Gradient2014 / Xiao Guo, Kang-He Xie, Yue-Bao Deng
-
Fuzzy Coordinated PI Controller: Application to the Real-Time Pressure Control Process2008 / N. Kanagaraj, P. Sivashanmugam, S. Paramasivam
-
Numerical Prediction of Hydrodynamic Loading on Circular Cylinder Array in Oscillatory Flow Using Direct-Forcing Immersed Boundary Method2012 / Ming-Jyh Chern, Wei-Cheng Hsu, Tzyy-Leng Horng
-
Geometrically nonlinear transverse steady-state periodic forced vibration of multi-degree-of-freedom discrete systems with a distributed nonlinearity
Abstract A method based on Hamilton’s principle and spectral analysis has been applied recently to nonlinear free vibrations of two and multi-degree-of-freedom (2-dof) and (N-dof) systems with cubic nonlinearities. This leads to calculation of the...
2012 / Ahmed Eddanguir, Zitouni Beidouri, Rhali Benamar -
Computational modelling and experimental validation of the thermal fusion bonding process in porous fibrous media2011 / M. Peksen, M. Acar, W. Malalasekera
-
Emissions and Performance Evaluation of DI CI - VCR Engine Fuelled with Honne oil Methyl Ester /Diesel Blends
Abstract The present work investigates the emission and thermal performance of DI CI variable compression ratio engine using blends of biodiesel and standard diesel as a fuel at compression ratios of 15,16,17 and 18. The biodiesel derived from non...
2015 / S.V. Channapattana, C. Kantharaj, V.S. Shinde, Abhay A. Pawar, Prashant G. Kamble -
Modeling the Interaction Between two-Wheeled Self-Balancing Vehicle and its Rider2013 / M. Ciężkowski
-
Fatigue Assessment for In-Service Components – A New Part for API 579-1/ASME FFS-1 Fitness-For-Service
Abstract The third edition of API 579-1/ASME FFS-1 Fitness-For-Service will include a new Part covering fatigue assessment procedures for in-service components. Fitness-For-Service (FFS) assessments are quantitative engineering evaluations that are...
2015 / David A. Osage -
Assessment of turbulence model performance: Severe acceleration with large integral length scales
Abstract Turbulence is substantially laminarised, when the mean flow experiences streamwise acceleration above a certain critical acceleration parameter. Recently, to essentially reveal aero engine intake acceleration scenarios, Direct Numerical...
2015 / Xiaoyu Yang, Paul G. Tucker -
A reduced order aerothermodynamic modeling framework for hypersonic vehicles based on surrogate and POD
Abstract Aerothermoelasticity is one of the key technologies for hypersonic vehicles. Accurate and efficient computation of the aerothermodynamics is one of the primary challenges for hypersonic aerothermoelastic analysis. Aimed at solving the...
2015 / Xin Chen, Li Liu, Teng Long, Zhenjiang Yue -
Development of a Sliding Vane Rotary Pump for Engine Cooling
Abstract The efficiency of a pump for engine cooling system in automotive sector can be very low (15%-20%) during the homologation cycle which is more oriented to medium and low engine loads. Actual pump technology makes reference always to...
2015 / R. Cipollone, D. Di Battista, G. Contaldi, S. Murgia, M. Mauriello -
Parametric Optimization of Low Temperature ORC System
Abstract Organic Rankine Cycle(ORC) can effectively recover the low grade heat source due to its distinctive thermodynamic performance. Based on Genetic Algorithm, net power output per unit mass of geothermal water is set as the objective function....
2015 / Zhu Kai, Zhang Mi, Wang Yabo, Sun Zhili, Liu Shengchun, et al. -
Design considerations for an underwater soft-robot inspired from marine invertebrates2015 / Michael Krieg, Isaac Sledge, Kamran Mohseni
-
A 2D inverse problem of predicting boiling heat transfer in a long fin2015 / Tadeusz Orzechowski
-
Quantitative evaluation of unmanned ground vehicle trajectory based on chaos theory2015 / Y. Sun, G. Xiong, X. Ma, J. Gong, H. Chen