Mechanical engineering topic list of research papers
-
Effects of Oil Warm up Acceleration on the Fuel Consumption of Reciprocating Internal Combustion Engines
Abstract The homologation cycle of vehicles for private passenger transportation or for light duty applications considers a cold start from ambient temperature. The most part of harmful substances (≈ 60-65%) are produced during the thermal engine...
2015 / Roberto Cipollone, Davide Di Battista, Marco Mauriello -
Remaining useful life prediction based on the Wiener process for an aviation axial piston pump
Abstract An aviation hydraulic axial piston pump’s degradation from comprehensive wear is a typical gradual failure model. Accurate wear prediction is difficult as random and uncertain characteristics must be factored into the estimation. The...
2015 / Xingjian Wang, Siru Lin, Shaoping Wang, Zhaomin He, Chao Zhang -
Analyses of pedestrian behavior on mid-block unsignalized crosswalk comparing Chinese and German cases2015 / X. Jiang, W. Wang, K. Bengler, W. Guo
-
A comparative study of precision finishing of rebuild engine valve faces using micro-grinding and ECH2015 / Harpreet Singh, Pramod Kumar Jain
-
Prediction of coking dynamics for wet coal charge2015 / Dariusz Kardaś, Sylwia Polesek-Karczewska, Przemysław Ciżmiński, Sławomir Stelmach
-
Numerical Investigation of Motion Response of Two Model Ships in Regular Waves
Abstract In this paper, the sea keeping performances of two model ships in regular waves are studied by our in-house solver naoe-FOAM-SJTU based on OpenFOAM code package. Volume of Fluid (VOF) method is used to capture the free interface and Finite...
2015 / Ruoshi Cha, Decheng Wan -
Numerical Simulation of Moving Load on Concrete Pavements2015 / Gabriela Lajčáková, Jozef Melcer
-
Parametric study of turbine NGV blade lean and vortex design
Abstract The effects of blade lean and vortex design on the aerodynamics of a turbine entry nozzle guide vane (NGV) are considered using computational fluid dynamics. The aim of the work is to address some of the uncertainties which have arisen from ...
2015 / Shaowen Zhang, David G. MacManus, Jianqiao Luo -
Modeling of MHD natural convection in a square enclosure having an adiabatic square shaped body using Lattice Boltzmann Method
Abstract A steady laminar two-dimensional magneto-hydrodynamics (MHD) natural convection flow in a square enclosure filled with an electrically conducting fluid is numerically investigated using Lattice Boltzmann Method (LBM). The left and right...
2016 / Ahmed Kadhim Hussein, H.R. Ashorynejad, S. Sivasankaran, Lioua Kolsi, M. Shikholeslami, et al. -
Stochastic heat transfer simulation of the cure of advanced composites2015 / T. Mesogitis, A. Skordos, A. Long
-
The Future of Pharmaceutical Manufacturing Sciences2015 / Jukka Rantanen, Johannes Khinast
-
Research on the characteristics of transverse dynamic stiffness of an inclined shallow cable2014 / D. Dan, B. Xu, H. Huang, X.-f. Yan
-
Modeling the Speed Choice Behaviors of Drivers on Mountainous Roads with Complicated Shapes2015 / Y. Shao, J. Xu, B. Li, K. Yang
-
Hydrostatic Worktable Performance of an Ultra-precision Optical Aspheric Machine Tool
Abstract Hydrostatic guide-ways utilizing thin film feedback restrictor are applied for the ultra-precision optical aspheric machine tool that we have developed. this machine tool. The parameters of the PM flow controllers have a direct influence on ...
2015 / Shuming Yang, Pu Zhao, Yukun Xu, Lin Sun, Pengfei Wu, et al. -
Self-localization method for mobile robot using acoustic beacons2015 / Satoki Ogiso, Takuji Kawagishi, Koichi Mizutani, Naoto Wakatsuki, Keiichi Zempo
-
Investigation of Influence of MQL Machining Parameters on Cutting Forces During MQL Turning of Carbon Steel St52-3
Abstract Basic information concerning a Minimum Quantity Lubrication (MQL) machining is presented in the paper. Generally speaking, there are two groups of MQL machining with respect of aerosol composition classification. First group represents the...
2015 / S. Ekinovic, H. Prcanovic, E. Begovic -
Enhancing hydroformability of nonaxisymmetric part with variable cross section2015 / H. S. Kang, B. D. Joo, M. Li, T. W. Hwang, Y. H. Moon
-
Rolling bearing fault diagnosis method based on data-driven random fuzzy evidence acquisition and Dempster-Shafer evidence theory2016 / X. Sun, J. Tan, Y. Wen, C. Feng
-
Deformation Characteristics and Sealing Performance of Metallic O-rings for a Reactor Pressure Vessel
Abstract This paper provides a reference to determine the seal performance of metallic O-rings for a reactor pressure vessel (RPV). A nonlinear elastic-plastic model of an O-ring was constructed by the finite element method to analyze its intrinsic...
2015 / Mingxue Shen, Xudong Peng, Linjun Xie, Xiangkai Meng, Xinggen Li -
Design, simulation and comparison of controllers for a redundant robot
Abstract The simulation tools are the foundation for the design of robot systems, for the application of robots in complex environments and for the development of new control strategies and algorithms. Because of this, the design, simulation and...
2015 / Claudio Urrea, John Kern