Mechanical engineering topic list of research papers
-
Research of Dielectric Breakdown Microfluidic Sampling Chip2013 / Feng Jiang, Yunwen Lei, Jun Yu
-
A Comparative Study on Different Parallel Solvers for Nonlinear Analysis of Complex Structures2013 / Lei Zhang, Guoxin Zhang, Lixiang Wang, Zhaosong Ma, Shihai Li
-
Experimental and Numerical Simulations Predictions Comparison of Power and Efficiency in Hydraulic Turbine2011 / Laura Castro, Gustavo Urquiza, Adam Adamkowski, Marcelo Reggio
-
An Effective Recognition Method for Road Information Based on Mobile Terminal2014 / Zheng Kun, Wang Wenpeng, Sun Guangmin
-
3D Geometrical Inspection of Complex Geometry Parts Using a Novel Laser Triangulation Sensor and a Robot2010 / Francisco Javier Brosed, Juan José Aguilar, David Guillomía, Jorge Santolaria
-
The Departure Characteristics of Traffic Flow at the Signalized Intersection2013 / Zhaowei Qu, Yan Xing, Hongyu Hu, Yuzhou Duan, Xianmin Song, et al.
-
A Bionic Camera-Based Polarization Navigation Sensor2014 / Daobin Wang, Huawei Liang, Hui Zhu, Shuai Zhang
-
Application of a Force Sensor to Improve the Reliability of Measurement with Articulated Arm Coordinate Measuring Machines2013 / Daniel González-Madruga, Eduardo González, Joaquín García, Ana Fernandez-Abia
-
Reaction Force/Torque Sensing in a Master-Slave Robot System without Mechanical Sensors2010 / Tao Liu, Chunguang Li, Yoshio Inoue, Kyoko Shibata
-
Measuring Service Reliability Using Automatic Vehicle Location Data2014 / Zhenliang Ma, Luis Ferreira, Mahmoud Mesbah
-
Application of Three Bioinspired Optimization Methods for the Design of a Nonlinear Mechanical System2013 / Romes Antonio Borges, Fran Sérgio Lobato, Valder Steffen
-
Modeling Evaluation of Tidal Stream Energy and the Impacts of Energy Extraction on Hydrodynamics in the Taiwan Strait2013 / Wei-Bo Chen, Wen-Cheng Liu, Ming-Hsi Hsu
-
Experiment and Simulation of Medium-Duty Tactical Truck for Fuel Economy Improvement2011 / Yeau-Jian Gene Liao, Allen Quail
-
Cylinder Pressure Characteristics of Turbocharged and Naturally Aspirated Diesel Engines
Abstract The article analyses the ways of air charge formation in the diesel engine as well as the principles of cylinder pressure change during the combustion process. As test objects, diesel engines of analogous constructional parameters but of...
2015 / Jüri Olt, Villu Mikita, Jüri Roots, Algirdas Jasinskas -
Study on pedestrian thorax injury in vehicle-to-pedestrian collisions using finite element analysis
Abstract Objective To explore the relationship between the collision parameters of vehicle and the pedestrian thorax injury by establishing the chest simulation models in car-pedestrian collision at different velocities and angles. ...
2015 / Wenjun Liu, Hui Zhao, Kui Li, Sen Su, Xiaoxiang Fan, et al. -
Corrosion Monitoring and Evaluation of Reinforced Concrete Structures Utilizing the Ultrasonic Guided Wave Technique2014 / Dongsheng Li, Shuaifang Zhang, Wei Yang, Wenyao Zhang
-
Single Phase Flow Pressure Drop and Heat Transfer in Rectangular Metallic Microchannels
Abstract Numerical simulations were performed using Fluent 14.5 to investigate single phase flow and conjugate heat transfer in copper rectangular microchannels. Two different configurations were simulated: (1) single channel with hydraulic diameter ...
2015 / Amirah M. Sahar, Mehmed R. Özdemir, Ekhlas M. Fayyadh, Jan Wissink, Mohamed M. Mahmoud, et al. -
CFD Simulation of Turbulent Flow and Heat Transfer Over Rough Surfaces
Abstract A three-dimensional numerical study of computational fluid dynamics and heat transfer simulations is conducted for a turbulent flow over rough surfaces. Numerical solutions were obtained using commercial software ANSYS FLUENT 6.3.26 for a...
2015 / CHAIB Khaled, NEHARI Driss, SAD CHEMLOUL Nouredine -
Investigation into dynamic response of a three-point bend specimen in a Hopkinson bar loaded fracture test using numerical methods2015 / R. A. Javed, Z. Shifan, C. Guo, K. S. Vecchio, F. Jiang
-
Development of the Integral Complex of Optimal Control of Heavy Machine Tools Adaptive Technological System for Wind-power Engineering Parts
Abstract The work is aimed at improving the adaptive control efficiency for machining process on heavy machine tools. The integral complex of optimal control, which includes a heavy machine tool, systems of tools and tool management, adaptive...
2015 / Viktor Kovalov, Yana Vasilchenko, Predrag Dašić