Mechanical engineering topic list of research papers
-
On the formation of limit cycle of the friction-induced stick-slip vibration in oilwell drillstring
Abstract In this paper, the stick-slip vibration in oilwell drillstring is studied. The drilling system is modelled as a lumped-parameter torsional pendulum and the interaction between the drill bit and the rock is treated as Coulomb friction....
2015 / Xiaohua Zhu, Liping Tang -
Ocean Economy and Fault Diagnosis of Electric Submersible Pump applied in Floating platform
Abstract Ocean economy plays a crucial role in the strengthening maritime safety industry and in the welfare of human beings. Electric Submersible Pumps (ESP) have been widely used in floating platforms on the sea to provide oil for machines....
2017 / Panlong Zhang, Tingkai Chen, Guochao Wang, Changzheng Peng -
Numerical simulation methodologies for design and development of Diffuser-Augmented Wind Turbines – analysis and comparison2016 / Lipian Michał, Karczewski Maciej, Molinski Jakub, Jozwik Krzysztof
-
Realization of heavy object transportation by mobile robots using handcarts and outrigger2016 / Fusao Ohashi, Kohei Kaminishi, Jorge David Figueroa Heredia, Hiroki Kato, Taiki Ogata, et al.
-
Integrated model for pricing, delivery time setting, and scheduling in make-to-order environments2017 / Hamid Sattari Garmdare, M. M. Lotfi, Mahboobeh Honarvar
-
Heat Conduction in a Functionally Graded Plate Subjected to Finite Cooling/Heating Rates: An Asymptotic Solution2011 / Zhihe Jin
-
Using multiple performance characteristics to optimize the percent zinc coating balances edge joints of galvanized steel sheets for metal inert gas pulse brazing process2017 / Khasempong Songsorn, Keartisak Sriprateep, Sampan Rittidech
-
Optimal control for jitter suppression of clutch engagement in upshift process of electric vehicles2017 / Junqiu Li, Yihe Wang, Yizheng Wang
-
Comparative Performance with Different Versions of Low Heat Rejection Combustion Chambers with Crude Rice Bran Oil2015 / M.V.S. Murali Krishna, N. Durga Prasada Rao, B. Anjeneya Prasad, P.V.K. Murthy
-
H2 control of a one-quarter semi-active ground vehicle suspension
Abstract Magneto-rheological (MR) dampers are effective solutions in improving vehicle stability and passenger comfort. However, handling these dampers implies a strong effort in modeling and control. This research proposes an H ...
2016 / L.C. Félix-Herrán, D. Mehdi, R.A. Ramírez-Mendoza, J. de J. Rodríguez-Ortiz, R. Soto -
Surface integrity of GH4169 affected by cantilever finish grinding and the application in aero-engine blades
Abstract GH4169 is the main material for aero-engine blades and integrated blisks. Because GH4169 has a poor milling performance, the profile precision and surface integrity of blades and integrated blisks are difficult to be met by utilizing the...
2015 / Xun Li, Shuang Ma, Fanjun Meng -
Heat transfer behavior of flat plate having spherical dimpled surfaces
Abstract In the present study, heat transfer analysis of dimpled surfaces of external flow was investigated. A total of 14 types of dimpled surfaces are studied. The effect of dimple pitch was examined. The experiments were carried out with air...
2016 / Nat Vorayos, Nopparat Katkhaw, Tanongkiat Kiatsiriroat, Atipoang Nuntaphan -
Identification of non-newtonian rheological parameter through an inverse formulation2010 / Shirley C. C. Nascimento, Mônica F. Naccache, Fernando A. Rochinha
-
Development of Knitted Materials Selection for Compression Underwear2017 / Zhe Cheng, V. E. Kuzmichev, D. C. Adolphe
-
An adaptive denoising fault feature extraction method based on ensemble empirical mode decomposition and the correlation coefficient2017 / Huixiang Yang, Tengfei Ning, Bangcheng Zhang, Xiaojing Yin, Zhi Gao
-
Microgravity experiments and numerical studies on ethanol/air spray flames
Abstract Spray flames are known to exhibit amazing features in comparison with single-phase flames. The weightless situation offers the conditions in which the spray characteristics can be well controlled before and during combustion. The article...
2016 / Romain Thimothée, Christian Chauveau, Fabien Halter, Colette Nicoli, Pierre Haldenwang, et al. -
Effect of Welding Speed and Tool Pin Geometry on Impact Strength in Friction Stir Welding of Aluminium 6101 T6 Alloy2016 / Rajbir Singh, Sanjeev Kumar, Preet Kanwal Singh
-
Preliminary study of the primary nozzle position of a supersonic air ejector with a constant-area mixing chamber2017 / Jan Kracik, Vaclav Dvorak
-
Theoretical analysis of air-fuel mixture formation in the combustion chambers of the gas engine with two-stage combustion system2014 / A. Jamrozik, W. Tutak
-
Heat and mass transfer through spiral tubes in absorber of absorption heat pump system for waste heat recovery
Abstract Heat and mass transfer of a LiBr/water absorption heat pump system (AHP) was experimentally studied during working a heating-up mode. The examination was performed for a single spiral tube, which was simulated for heat transfer tubes in an...
2017 / Yoshinori Itaya, Masatoshi Yamada, Kenji Marumo, Nobusuke Kobayashi