Mechanical engineering topic list of research papers
-
A coupled-field model of a rotating composite beam with an integrated nonlinear piezoelectric active element2017 / Jarosław Latalski
-
Analysis on the Influence of Shortwave Communication in Different Ground Forms2017 / Qian-Bo Zhuang, Ming-Ming Cui, Xi-Liang Lin
-
Experimental study of the effect of slit width and slit spacing on the thermal performance of slit-glazed collectors2017 / Seyed Mahdi Taheri Mousavi, Fuat Egelioglu
-
The Architecture of Intelligent System for CNC Machine Tool Programming
Abstract The goal of the paper is to present the architecture of CNC machine tool programming system based on the meta-knowledge and recognition of workpiece intermediate states. Meta-knowledge represented as hierarchical decision nets has the...
2017 / Jan Duda, Janusz Pobozniak -
Control algorithm and evaluation of a powered wheeled walker for tracking a user2017 / Jung-Yup Kim, Min-Jong Park, Kiwon Park
-
Study on applicability of radial-outflow turbine type for 3 MW WHR organic Rankine cycle
Abstract The article presents the results of study on the reasonability of using radial-outflow turbines in ORC. Peculiarities of radial-outflow turbine design utilizing modern design technologies and application to ORC was considered in the first...
2017 / Dmytro Maksiuta, Leonid Moroz, Maksym Burlaka, Yurii Govoruschenko -
Thermodynamic Optimization of heat recovery ORCs for heavy duty Internal Combustion Engine: pure fluids vs. zeotropic mixtures
Abstract This article focuses on the optimization of ORCs for heat recovery from heavy duty Internal Combustion Engines (ICEs), with particular attention to the optimal fluid selection. We considered two different ICEs featuring same power (10 MW)...
2017 / Roberto Scaccabarozzi, Michele Tavano, Costante Mario Invernizzi, Emanuele Martelli -
Simulation of heat transfer in combustion chamber waterwall tubes of supercritical steam boilers2016 / Sławomir Grądziel, Karol Majewski
-
Application of TRIZ Methodology in Diffusion Welding System Optimization2017 / N. Ravinder Reddy, V.V. Satyanarayana, M. Prashanthi, N. Suguna
-
Disturbance observer-based control for nonlinear systems subject to mismatched disturbances with application to hypersonic flight vehicles2017 / Yunling Li, Ming Zeng, Hao An, Changhong Wang
-
Variation function fitting method based on particle swarm optimization2016 / Ping Duan, Jia Li, Hai Yang Lv
-
Design and Simulation of PID parameters self-tuning based on DC speed regulating system2016 / Wei Jie Feng, Dong Xia Xu, Zhong Yu Hu
-
Deployment Strategy for Charging Piles Based on Distribution Network Capacity Planning and Users’ Needs2015 / Chongyang Du, Bing Qi, Hongwei Xie, Hongchang Lv
-
Study on electronic stability program control strategy based on the fuzzy logical and genetic optimization method2017 / Lisheng Jin, Xianyi Xie, Chuanliang Shen, Fangrong Wang, Faji Wang, et al.
-
Application analysis of theoretical moisture penetration depths of conventional building material2017 / Hang Wan, Xinhua Xu, Anbang Li
-
Heat Flux Density Distribution Differences in Four Machining Processes of AlSi7 Block: MQL Drilling, Tapping, Reaming and Dry Milling
Abstract Dry machining remains an objective for aluminum parts in the automotive industry. One of the limitations is the geometrical thermal distortion induced by the heat flux generated by cutting operations. This paper aims at comparing the heat...
2017 / Sangil Han, Pierre Faverjon, Frédéric Valiorgue, Rech Joël -
Influence of AFP Process Parameters on the Temperature Distribution Used for Thermal in-process Monitoring
Abstract Automated Fiber Placement is an important manufacturing process when it comes to aerospace part generation. To minimize the machine downtime, an online monitoring system is necessary to prevent time consuming visual inspection. Therefore, a ...
2017 / C. Schmidt, B. Denkena, T. Hocke, K. Völtzer -
Comparison of Solar Sail Spacecraft Flight and Low Thrust Spacecraft Flight to Potentially Hazardous Asteroid Orbit
Abstract This paper outlines the nonlinear flight simulation of a low thrust spacecraft and a solar sail spacecraft. The main purpose of the work is ballistic comparison of solar sail spacecraft flight and low thrust spacecraft flight. The...
2017 / Roman M. Khabibullin -
System Interface for an Integrated Intelligent Safety System (ISS) for Vehicle Applications2010 / Mahammad A. Hannan, Aini Hussain, Salina A. Samad
-
Molecular Dynamics Study of Fluid Solid Interfacial Slip and Its Effect on Aerodynamic Drag2017 / Asef Mohammed, Jeetu S. Babu