Mechanical engineering topic list of research papers
-
Mechatronic thermostatic water mixer for building automation2015 / S. Mauro, T. Mohtar
-
Application of Uniform Design and Quantum-behaved Particle Swarm Optimization in Solving the Sensitivity Problem a Railway Vehicle System
Abstract This paper, based on uniform design and quantum-behaved particle swarm optimization (QPSO), aims to solve the sensitivity problem of a railway vehicle system with fourteen degrees of freedom and nonlinear coupled differential equations of...
2014 / Cheng-Kang Lee, Yung-Chang Cheng -
Lean blowout limits of a gas turbine combustor operated with aviation fuel and methane2015 / Wei Xiao, Yong Huang
-
Testing the Performances of DC Series Motor Used in Electric Car
Abstract By using a laboratory test desk built specially to test DC Series Motor and 3-phase IM, several practical tests could be performed. This desk include the electric motor, an electronic controller and Battery Bank with a charger, enabling the ...
2015 / Zeina Bitar, Abbas Sandouk, Samih Al Jabi -
Hydrate Formation/Dissociation in (Natural Gas + Water + Diesel Oil) Emulsion Systems2013 / Chang-Sheng Xiang, Bao-Zi Peng, Huang Liu, Chang-Yu Sun, Guang-Jin Chen, et al.
-
Exergetic cost of steam power plant operation2011 / Michał Budnik, Wojciech Stanek
-
Decision-making of Aircraft Optimum Configuration Utilizing Multi-dimensional Game Theory
Abstract As multi-discipline coupling and components interference often affect the aircraft configuration decision-making and analysis during conceptual design process, this article presents an approach of multidimensional game theory based on...
2010 / Peng Runyan, Wang Heping, Wang Zhengping, Lin Yu -
Layer-oriented Element Integration Algorithm of Conformal Perfectly Matched Layer
Abstract As an efficient artificial truncating boundary condition, conformal perfectly matched layer (CPML) is a kind of multilayer anisotropic absorbing media. To reduce computing effort of CPML, this article proposes a layer-oriented element...
2009 / Zhang Yongjie, Sun Qin -
Computer Aided Electroforming. Elecform3D™
Abstract Electroforming is an electrolytic process that enables the manufacture of metallic parts with good mechanical properties and a high level of accuracy and reproducibility. In this process a thin metallic shell is deposited onto a model part...
2013 / P. Hernández, A. Socas, A. Benítez, N. Díaz, M. Marrero, et al. -
Accelerating Solid-fluid Interaction using Lattice-boltzmann and Immersed Boundary Coupled Simulations on Heterogeneous Platforms
Abstract We propose a numerical approach based on the Lattice-Boltzmann (LBM) and Immersed Boundary (IB) methods to tackle the problem of the interaction of solids with an incompressible fluid flow. The proposed method uses a Cartesian uniform grid...
2014 / Pedro Valero-Lara, Alfredo Pinelli, Manuel Prieto-Matias -
Control strategy of maglev vehicles based on particle swarm algorithm2014 / Hui Wang, Gang Shen, Jinsong Zhou
-
Simulation of Bi-direction Pedestrian Movement in Corridor Based on Crowd Space
Abstract Focusing on bi-direction pedestrian movement in corridor, this paper presents the definition of crowd space which is divided into personal space and information processing space. Pedestrian movement is caused by the synthetically actions of ...
2014 / Shiwei Li, Huimin Niu -
Effect of Speed Ratio on the Performance and Flow Field of a Counter Rotating Turbine
Abstract Counter Rotating Turbine (CRT) is an axial turbine with nozzle followed by a rotor and another rotor that rotates in the opposite direction of the first one. Studies show that speed ratio is one of the parameters that affect the performance ...
2014 / Rayapati Subbarao, M. Govardhan -
Experimental and finite element studies on free vibration of skew plates2014 / C. V. Srinivasa, Y. J. Suresh, W. P. Prema Kumar
-
Vibration Analysis of Twisted Timoshenko Beams with Internal Kelvin-Voigt Damping
Abstract Bending-bending vibration equations of a twisted beam with damping of Kelvin-Voigt type are established using the Timoshenko beam theory and applying Hamilton's principle. The equations of motion of the twisted beam are derived in the twist ...
2014 / W.R. Chen, S.W. Hsin, T.H. Chu -
Deformation Compensation of Ram Components of Super-heavy-duty CNC Floor Type Boring and Milling Machine
Abstract Ram is a very important component of super-heavy-duty computer numerical control (CNC) floor type boring-milling machine, and deformation of ram is a significant source causing errors in machining process. To compensate the deformation...
2012 / Fenghe WU, Lijun QIAO, Yaoling XU -
Analytical Model of Elastomeric Lag Damper Kinematic Coupling and Its Effect on Helicopter Air Resonance in Hover
Abstract For an elastomeric lag damper with nonlinear properties and kinematic couplings, its differential equation about equilibrium position was derived in a rotating frame. The equation was then transformed into a non-rotating frame by...
2011 / Guo-cai HU, Jin-wu XIANG, Xiao-gu ZHANG -
Effects of Air Intake Pressure to the Fuel Economy and Exhaust Emissions on a Small SI Engine
Abstract This study discusses on the fuel economy and exhaust emissions at variations of air intake pressure. The air intake pressure is influenced by the degree of opening throttle plate and venturi effect which draw the fuel to the combustion...
2014 / Nik Rosli Abdullah, Nafis Syabil Shahruddin, Aman Mohd. Ihsan Mamat, Salmiah Kasolang, Aminuddin Zulkifli, et al. -
Three Dimensional Computational Study for Spiral Dry Gas Seal with Constant Groove Depth and Different Tapered Grooves
Abstract The three dimensional simulation for dry gas seal with constant depth spiral grooves and with different taper grooves is done using ANSYS FLUENT CFD code. Grid independence study and code validation are done with experimental work. The...
2014 / Ibrahim Shahin, Mohamed Gadala, Mohamed Alqaradawi, Osama Badr -
Process Plans and Manufacturing Dimensions for the Steering of Machining: The Copilot-Pro® Methodology
Abstract To set the machining, the technique commonly used is to measure dimensions between each machined surface and the one which locates the workpiece into the workpiece holder. This technique leads to dimensions with much smaller tolerances than ...
2013 / Éric Pairel, Ephraïm Goldschmidt, Benjamin Vayre, Boukar Abdelhakim, Maurice Pillet