Mechanical engineering topic list of research papers
-
Adaptive Finite-Time Control for a Flexible Hypersonic Vehicle with Actuator Fault2013 / Jie Wang, Qun Zong, Xiao He, Hamid Reza Karimi
-
Optimization of Microextrusion Preforming Using Taguchi Method2013 / Shao-Yi Hsia
-
Managing Rush Hour Congestion with Lane Reversal and Tradable Credits2014 / Qing Li, Ziyou Gao
-
Research on Conflict Decision between Shift Schedule and Multienergy Management for PHEV with Automatic Mechanical Transmission under Special Driving Cycles2013 / JunQiang Xi, Yongdan Chen
-
Parameters Separated Calibration Based on Particle Swarm Optimization for a Camera and a Laser-Rangefinder Information Fusion2014 / Kaijun Zhou, Lingli Yu
-
Dynamic Pressure Gradient Model of Axial Piston Pump and Parameters Optimization2014 / Shi Jian, Li Xin, Wang Shaoping
-
Effect of Surface Roughness and Viscosity-Pressure Dependency on the Couple Stress Squeeze Film Characteristics of Parallel Circular Plates2014 / Neminath Bhujappa Naduvinamani, Siddangouda Apparao, Ayyappa G. Hiremath
-
Experiment and Theoretical Analysis Study of ETFE Inflatable Tubes2014 / YanLi He, WuJun Chen
-
The Stress and Reliability Analysis of HTR’s Graphite Component2014 / Xiang Fang, Haitao Wang, Suyuan Yu
-
An Overview on Study of Identification of Driver Behavior Characteristics for Automotive Control2014 / Na Lin, Changfu Zong, Masayoshi Tomizuka, Pan Song, Zexing Zhang, et al.
-
Visual Tracking via Feature Tensor Multimanifold Discriminate Analysis2014 / Ting-quan Deng, Jia-shu Dai, Tian-zhen Dong, Ke-jia Yi
-
A Hybrid Finite Element-Fourier Spectral Method for Vibration Analysis of Structures with Elastic Boundary Conditions2014 / Wan-You Li, Binglin Lv, Huajiang Ouyang, Jingtao Du, Haijun Zhou, et al.
-
Prestress Force Identification for Externally Prestressed Concrete Beam Based on Frequency Equation and Measured Frequencies2014 / Luning Shi, Haoxiang He, Weiming Yan
-
Studies of Compression Corner Flowfields Using THREE Turbulent Models
Abstract This paper presents the numerical investigations on shock-wave/turbulent boundary-layer interaction flow over a compression corner using SA, SST, and WJ EASM k-ω turbulence models, and compared with experiment data. The applicability of the ...
2012 / Changxian Zhang, Jinglei Xu, Lin Gao, Ge Gao -
Safety Culture Assessment of Coal Mine Enterprise
Abstract The paper is inclined to introduce a renovated fuzzy overall evaluation model specially purposed for safety culture of coal mine enterprise, which was established by us authors based on our own years’ experience in this area. The index...
2011 / Chen Kun, Xu Longjun, Chen Yan, Bi Zhiming, Yi Jun -
An Overview of Modeling Cement Based Materials at Elevated Temperatures with Mechanics of Multi-Phase Porous Media2011 / Dariusz Gawin, Francesco Pesavento
-
Plastic Optical Fiber Displacement Sensor Based on Dual Cycling Bending2010 / Jao-Hwa Kuang, Pao-Chuan Chen, Yung-Chuan Chen
-
Asymptotic Tracking Position Control for Nonlinear Systems using BacksteppingTechnique
Abstract Backstepping is a technique developed for designing stabilizing controls for a special class of nonlinear dynamical systems. It is built from subsystems that radiate out from an irreducible system which can be stabilized using some other...
2013 / S. Md. Rozali, M.Nizam Kamarudin, M.F. Rahmat, A. Rashid Husain -
Application of Genetic Algorithm to The Position Optimization of The Outriggers for Trimaran2009 / Shunhuai Chen, Lianqiong Cui
-
Simulation of High Temperature Air Combustion with modified Eddy-Break-Up combustion model
Abstract The numerical modeling of High Temperature Air Combustion (HTAC) could correctly predict the flame and emission characteristics so far, however, the precision is not satisfactory. In this paper, a parameter-modified Eddy-Break-Up (EBU)...
2012 / Yaxin Su, Cuiwu Chen, Along Su