Mechanical engineering topic list of research papers
-
Experimental Study on the Differential Hybrid System Hybrid Electric Vehicle
Abstract By the transmission analysis of the traditional symmetrical bevel gear differential which is acted as the power coupler, we had built the mathematic model, and also built the test-bed, and took simulation test by the NEDC condition. First...
2011 / Xiaohua Zeng, Liwei Nie, Qingnian Wanga -
Development of Advanced Conventional and Hybrid Powertrains by Mechanistic System Level Simulations
Abstract The paper presents a mechanistic system level simulation approach for modeling hybrid and conventional vehicles. The paper addresses the dynamic interaction between the different domains: internal combustion engine, exhaust aftertreatment...
2012 / Tomaž Katrašnik, Johann C. Wurzenberger -
A numerical study of the dimple/gimbal interface in a hard disk drive2011 / Longqiu Li, Hao Zheng, Edmund B. Fanslau, Frank E. Talke
-
Vibration of wavy single-walled carbon nanotubes based on nonlocal Euler Bernoulli and Timoshenko models2012 / Payam Soltani, Amir Kassaei, Mohammad Taherian, Anooshiravan Farshidianfar
-
Development of a fast tool servo in noncircular turning and its control
Abstract To meet the main requirements of output displacement, bandwidth frequency and accuracy in noncircular turning, a fast tool servo (FTS) system based on piezoelectric (PZT) voltage feedback is developed. A flexure hinge structure is designed...
2013 / Haoquan Ma, Jie Tian, Dejin Hu -
Investigation of rotor control system loads
Abstract This paper concentrates on the aeroelasticity analysis of rotor blade and rotor control systems. A new multi-body dynamics model is established to predict both rotor pitch link loads and swashplate servo loads. Two helicopter rotors of...
2013 / Tao Sun, Jianfeng Tan, Haowen Wang -
On-line Workpiece Height Estimation and its Application in Servo Feed Control of WEDM Process
Abstract On-line estimation of workpiece height is essential for wire breaking prevention in WEDM process. In addition, it can provide the reference of machining parameters setting for increasing machining speed and stability. A new on-line WEDM...
2013 / Y.-S. Liao, T.-J. Chuang, Y.-P. Yu -
A High Performance Computing Cloud Computing Environment for Machining Simulations
Abstract Machining is a pervasive manufacturing process used in industries such as automotive, aerospace, medical implants and oil and gas. Analysis of processes via physics-based modeling enables new and innovative designs for cutting tools,...
2013 / X. Man, S. Usui, S. Jayanti, L. Teo, T.D. Marusich -
Finite difference solutions for heat transfer during drying of cubic papaya particles
Abstract Heat transfer is one of the mostly used processes in industry. With the growth of food consumption, it is notorious the use of drying to increase the lifetime of organic products like fruits, especially through dehydration. In this work,...
2012 / Rebeca D. Loss, Isaac P. Santos, Eduardo P. Muniz, José R.C. Proveti, Paulo S.S. Porto -
Optimum design and control of amine scrubbing in response to electricity and CO2 prices
Abstract This paper presents steady state and dynamic modelling of post combustion CO2 capture using 30 wt% MEA integrated with models of CO2 compression and the steam power cycle. It uses multivariable optimization tools to maximize hourly profit...
2011 / Sepideh Ziaii, Gary T. Rochelle, Thomas F. Edgar -
Complete Low-Cost Implementation of a Teleoperated Control System for a Humanoid Robot2013 / Andrés Cela, J. Yebes, Roberto Arroyo, Luis Bergasa, Rafael Barea, et al.
-
Wearout Reliability and Intermetallic Compound Diffusion Kinetics of Au and PdCu Wires Used in Nanoscale Device Packaging2013 / C. L. Gan, E. K. Ng, B. L. Chan, F. C. Classe, T. Kwuanjai, et al.
-
Analysis of Hysteresis-Free Creep of the Stack Piezoelectric Actuator2013 / Xueliang Zhao, Chengjin Zhang, Hongbo Liu, Guilin Zhang, Kang Li
-
Experimental and Numerical Study on the Thermal Performance of a Water/Steam Cavity Receiver2013 / Nan Tu, Jinjia Wei, Jiabin Fang
-
Research of DOA Estimation Based on Single MEMS Vector Hydrophone2009 / Wen Dong Zhang, Ling Gang Guan, Guo Jun Zhang, Chen Yang Xue, Kai Rui Zhang, et al.
-
A Methodology to Estimate Capacity Impact due to Connected Vehicle Technology2011 / Daiheng Ni, Jia Li, Steven Andrews, Haizhong Wang
-
Effect of the Material Parameters on Layered Viscoelastic Frictional Contact Systems2010 / Fatin F. Mahmoud, Ahmed G. El-Shafei, Amal E. Al-Shorbagy, Alaa A. Abdel Rahman
-
The Evolution of Host Specialization in the Vertebrate Gut Symbiont Lactobacillus reuteri2011 / Steven A. Frese, Andrew K. Benson, Gerald W. Tannock, Diane M. Loach, Jaehyoung Kim, et al.
-
Track-Bridge Longitudinal Interaction of Continuous Welded Rails on Arch Bridge2013 / Rong Chen, Ping Wang, Xian-kui Wei
-
Direct Simulation of Low-Re Flow around a Square Cylinder by Numerical Manifold Method for Navier-Stokes Equations2012 / Zhengrong Zhang, Xiangwei Zhang