Mechanical engineering topic list of research papers
-
Research on the Digital Workshop Layout Based on Steel Material Processing Workshop
Abstract Aiming at the layout optimization of the steel structure machining workshop in modern ship manufacturing industry, a digital optimum solution is proposed. First optimize the production flow and enterprise resources and build the 3D visual...
2012 / Yang Liu, Mei Meng, Da-peng Wang -
Introduction of Probabilistic Risk Assessment Approach to Analyze the Safety of MVS
Abstract Based on the definition of safety assessment, the safety assessment of mine ventilation system index system is established in this article, and to assess the safety of MVS with the introduction of probabilistic risk assessment (PRA) method. ...
2011 / Huang Guang-qiu, Pan Chang-bo -
Numerical Simulation of Shock Wave Structure in Gas Explosion
Abstract In order to study the characteristics of gas explosion in coal mine, on the basis of theoretical analysis and experimental research, the ignition and propagation characteristics of gas explosion is simulated by the introduction of...
2011 / Zhang Licong, Zhang Yulong, Xu Jingde, Yang Gengyu, Hou Shiqiang, et al. -
A virtual inspection framework for precision manufacturing of aerofoil components
Abstract The finite element method plays an extremely important role in forging process design as it provides a valid means to quantify forging errors and thereby govern die shape modification to improve the dimensional accuracy of the component....
2012 / Jonathan E. Makem, Hengan Ou, Cecil G. Armstrong -
Pavement crack characteristic detection based on sparse representation2012 / xiaoming sun, jianping huang, wanyu liu, Mantao Xu
-
An experimental study of process variables in turning operations of Ti–6Al–4V and Cr–Co spherical prostheses2012 / J. V. Abellán-Nebot, H. R. Siller, C. Vila, C. A. Rodríguez
-
On the Development of Condition Based Maintenance Strategy for Offshore Wind Farm: Requirement Elicitation Process
Abstract Motivation: Condition monitoring and diagnostic practices have become significantly important part of offshore wind farms in order to cut down operation and maintenance costs. The challenge is to enable Condition Based Maintenance (CBM)...
2012 / Idriss El-Thalji, Erkki Jantunen -
The Experimental Study between Inside Fluid and Outside Wall Temperature of Enclosed Container
Abstract This model establishes a closed containers to simulate the internal fluid flow and heat transfer process, and obtain an indirect measurement of the relationship between the internal fluid temperature style (curve) in different wall...
2012 / Shi Sun, Wenji Li -
Energy assessment of Paper Machines
Abstract There is a large value in making Pulp and Paper mills more energy efficient. ABB has developed an energy assessment service where opportunities to save energy in the paper machine are identified. The energy assessment is done by quantifying ...
2012 / Naveen Bhutani, Carl Fredrik Lindberg, Kevin Starr, Robert Horton -
Integration of finite element and multibody system algorithms for the analysis of human body motion
Abstract The objective of this paper is to demonstrate the use of the absolute nodal coordinate formulation (ANCF) in the integration of finite element (FE) and multibody system (MBS) algorithms for modeling the rigid body contact and the ligament...
2011 / Ahmed A. Shabana, Florentina M. Gantoi, Michael A. Brown -
Uniform crashworthiness optimization of car body for high-speed trains2013 / Mirosław Mrzygłód, Tomasz Kuczek
-
Design and Realization Of Roller Mill Control System
Abstract a Distributed Control System(DCS) of cement raw materials is presented for the vertical roller mill by the application of ABB's IndustrialIT. The results demonstrate the practical application of the system's utility and effectiveness and...
2012 / QianHong Wang, Qiang Zhang, XiaoLi Bai, HongLiang Yu -
Creation of Curved Surface by Lathe Turning -Development of CAM system using original tool layout-
Abstract The machining of 3D curved surfaces with an un-axisymmetric axis by lathe turning is proposed considering the best machinable tool layout. The best offset tool layout from the central axis of a spindle enables us to machine curved surfaces...
2012 / Yoshitaka Morimoto, Souichiro Emoto, Takayuki Moriyama, Hideharu Kato, Katsuhiro Nakagaki, et al. -
Designing Thrust Sliding Bearings of High Bearing Capacity
Abstract The problem of increasing the bearing capacity of the thrust bearings is a subject of numerous scientific and technological researches, the results of which are used by a variety of firms, but the proposed measures and recommendations for...
2012 / V. Martsinkovsky, V. Yurko, V. Tarelnik, Yu. Filonenko -
Providing of the Law of Pumping Station Parameters’ Regulation by Means Of Throttling Elements
Abstract In the article the work of pumping station with centrifugal pumps working in parallel with throttle control is considered. Analytical dependences for pumping station's characteristic and method of its effectiveness’ determining are taken...
2012 / Viktor Nenja, Sergey Khovanskyy, Lidia Gapich -
Dynamic Performance Evaluation of a 2-DoF Planar Parallel Mechanism2012 / Hao Qi, Guan Liwen, Wang Jianxin
-
Three-dimensional Numerical Simulation of Vertical Vortex at Hydraulic Intake
Abstract To investigate an effective numerical model for simulating vertical vortex, turbulent models with VOF method are compared. The effects of the turbulent kinetic energy, the turbulent dissipation rate and the turbulent viscosity on formation...
2012 / Yunliang Chen, Chao Wu, Bo Wang, Min Du -
On Steam Pipe Network Modeling and Flow Rate Calculation
Abstract The paper demonstrates the method to set up the pipe network hydraulic-thermal synthetic mode by applying hydraulic and thermal models of single pipe, and proposes the algorithm based on searching for the problem that iterative calculation...
2012 / Xianxi Luo, Mingzhe Yuan, Hong Wang, Yang Jia, Fenghua Wu -
Numerical analysis on noise of rotor with unconventional blade tips based on CFD/Kirchhoff method
Abstract A solver is developed aiming at efficiently predicting rotor noise in hover and forward flight. In this solver, the nonlinear near-field solutions are calculated by a hybrid approach which includes the Navier–Stokes and Euler equations...
2013 / Bo Wang, Qijun Zhao, Guohua Xu, Liang Ye, Junyi Wang -
Simulation of obstacles’ effect on industrial robots’ working space using genetic algorithm
Abstract The study of robot workspace is an interesting problem since its applications are directly related to industry. However, it involves several mathematical complications; Thus, many of the arising questions are left without a definite answer. ...
2013 / M.F. Aly, A.T. Abbas