Mechanical engineering topic list of research papers
-
Hybrid Bearing with Actively Adjustable Radial Gap of Gas Foil Bearing
Abstract The article presents the design and operation principle of a hybrid bearing with actively adjustable radial gap of a gas foil bearing. The hybrid bearing is a combination of a ball bearing and gas foil bearing with speed separation....
2015 / Roman Polyakov, Maxim Bondarenko, Leonid Savin -
Extension Innovation Design of Product Family Based on Kano Requirement Model
Abstract By the existing innovation design methods of product family, people can get new products design effectively. However, these methods cannot make their products to meet customers’ demands completely, because they cannot help people to turn...
2015 / Yongqiang Liao, Chunyan Yang, Weihua Li -
The Effect of Nitrogen and Argon Dilution on Methane Oxidation in Laminar Flames
Abstract Numerical simulation of dilution effect on combustion and flame properties is desirable for various industrial or scientific applications. Predicative capabilities of the simplified (one- and two-step) chemical kinetic mechanisms of methane ...
2012 / M. Kozubková, E. Kozubek, V. Nevrlý, P. Bitala, O. Štěpánek, et al. -
Simultaneous Topology, Shape, and Sizing Optimisation of Plane Trusses with Adaptive Ground Finite Elements Using MOEAs2013 / Norapat Noilublao, Sujin Bureerat
-
MFC Sensors and Actuators in Active Vibration Control of the Circular Plate2015 / Lucyna Leniowska, Dominik Mazan
-
Roughness Parameters Calculation By Means Of On-Line Vibration Monitoring Emerging From AWJ Interaction With Material2015 / Pavol Hreha, Agata Radvanska, Lucia Knapcikova, Grzegorz M. Królczyk, Stanisław Legutko, et al.
-
Mechanical properties of friction-stir-welded polyamide sheets2015 / Imad M. Husain, Raed K. Salim, Taher Azdast, Soran Hasanifard, Sajjad M. Shishavan, et al.
-
Design of Experiment based on VMEA (Variation Mode and Effect Analysis)
Abstract This paper presents a method where the Variation Mode and Effect Analysis is used to convert subjective knowledge about variation and importance of parameters for a certain characteristic among practicing engineers into numerically...
2014 / Kent Cronholm -
Application of Road Information in Ground Moving Target Tracking
Abstract A new algorithm is developed to achieve accurate state estimation in ground moving target tracking by means of using road information. It is an adaptive variable structure interacting multiple model estimator with dynamic models...
2007 / Zhen Xinyan, Zhao Wei -
Non-Newtonian fluid flow in an axisymmetric channel with porous wall
Abstract In the present article Optimal Homotopy Asymptotic Method (OHAM) is used to obtain the solutions of momentum and heat transfer equations of non-Newtonian fluid flow in an axisymmetric channel with porous wall for turbine cooling...
2013 / M. Hosseini, Z. Sheikholeslami, D.D. Ganji -
Water Tunnel Experimental Investigation on Drag Reduction of Coating Surface Wall
Abstract In this paper the prediction of friction drag reduction & cavitation inhibition were investigated by water tunnel experiment. The drag characteristic curve and up to 12% drag reduction was acquired experimentally. And the...
2015 / Yan Yao, Jin-ling Luo, Hao Liu, Kun Zhu -
Variable Speed Limit Control on Highway Work Zone Considering Large Vehicle Mix Rates
Abstract Due to the difference of vehicle type and power performance between large vehicles and cars, large vehicle mix rate will have an important impact on traffic flow of work zone and lead to the decrease of driving safety. Through a survey of...
2013 / WU Zhizhou, LI Hao, Yang Hongsu -
A Unified Formula for Determination of Wellhead Pressure and Bottom-hole Pressure
Abstract The number of gas injection or exploitation projects is on fast increase with growing energy needs and environmental problems. Of these projects, the calculation and the control of wellhead pressure or bottom-hole pressure in wellbores are...
2013 / Mingze Liu, Bing Bai, Xiaochun Li -
Determination of Target Values of Engineering Characteristics in QFD Using Uncertain Programming2015 / Yunwen Miao, Yuanyuan Liu, Yizeng Chen
-
Time-domain hybrid method for simulating large amplitude motions of ships advancing in waves2015 / Shukui Liu, Apostolos D. Papanikolaou
-
Modeling of multibody systems with redundant joints
Abstract This paper deals with the modeling of a multibody system in which some pairs of bodies are connected by more than one joints with the same kinematic constraints. In such system, the redundant joints must be removed out artificially to...
2012 / Zhaohui Qi, Huitao Song -
Experimental Investigation for a New Solar Desalination System
Abstract The growing scarcity of fresh water is driving the implementation of desalination on an increasingly large scale. However, the energy required to run desalination plants remains a drawback. The idea of using renewable energy sources is...
2013 / Ahmed F. Elsafty, Mahmoud M. Abbas -
Active Tailstock for Precise Alignment of Precision Forged Crankshafts during Grinding
Abstract Within the Collaborative Research Centre 489 at the Leibniz Universitaet Hannover a new and innovative process chain for the manufacture of crankshafts is being investigated. By burr-free and near-net-shaped precision forging the process...
2013 / B. Denkena, O. Gümmer -
A Wavelet Bicoherence-Based Quadratic Nonlinearity Feature for Translational Axis Condition Monitoring2014 / Yong Li, Xiufeng Wang, Jing Lin, Shengyu Shi
-
Identifying Factors Impacting Customers’ Perceived Waiting Time in High Density Passenger Flow Waiting Areas
Abstract The pedestrian waiting area is a kind of important pedestrian traffic facility. According to pedestrians’ perceived waiting time, this paper evaluates the level of service (LOS) of waiting areas with high density pedestrian flow. After a...
2013 / Jiao Rong Wu, Su Gang Lu, Ying En Ge