Mechanical engineering topic list of research papers
-
Performance of Pulverized Coal Combustion under High Temperature Air Diluted by Steam2014 / Mohsen Saffari Pour, Yang Weihong
-
Estimating Young’s Modulus of Materials by a New Three-Point Bending Method2014 / Xiaohu Zeng, Shifeng Wen, Mingxi Li, Gongnan Xie
-
Localization of Outdoor Mobile Robots Using Curb Features in Urban Road Environments2014 / Hyunsuk Lee, Jooyoung Park, Woojin Chung
-
Fault Feature Analysis of a Cracked Gear Coupled Rotor System2014 / Hui Ma, Rongze Song, Xu Pang, Bangchun Wen
-
Tendering Evaluation Method of Hydraulic Projects Based on Variable Weight
Abstract In this paper, Variable weight method is used in hydraulic projects tendering evaluation. In the process of decision-making, given the range of indicators to assess the value of their weights by the corresponding changes in the valuation...
2012 / Ruojun Yao, Guangwen Ma -
The Numerical Analysis of Radial Thrust and Axial Thrust in the Screw Centrifugal Pump
Abstract The solid-liquid two-phase unsteady flow in the screw centrifugal pump is simulated during one revolution by using CFD software. The pressure fluctuations at the volute outlet, the distribution of radial thrust and axial thrust in the screw ...
2012 / Wei Han, Wei Maa, Rennian Li, Qifei Li -
Completeness Assessment of Emergency System–Engineering Application in a Petrochemical Reservoir
Abstract A mature emergency system is the premise to ensure emergency planning to be performed perfectly. Aimed at the six emergency management goals, the challenge caused by risk potential and contribution caused by emergency competence formed by...
2012 / Chen Chen, Zhang Xin-mei -
Comparative performance analysis of combined-cycle pulse detonation turbofan engines (PDTEs)
Abstract Combined-cycle pulse detonation engines are promising contenders for hypersonic propulsion systems. In the present study, design and propulsive performance analysis of combined-cycle pulse detonation turbofan engines (PDTEs) is presented....
2013 / Sudip Bhattrai, Hao Tang -
Tuning fractional PID controllers for a Steward platform based on frequency domain and artificial intelligence methods2013 / Cosmin Copot, Yu Zhong, Clara Ionescu, Robin Keyser
-
A Polymer-Based Capacitive Sensing Array for Normal and Shear Force Measurement2010 / Ming-Yuan Cheng, Chun-Liang Lin, Yu-Tse Lai, Yao-Joe Yang
-
A Study on a Centralized Under-Voltage Load Shedding Scheme Considering the Load Characteristics
Abstract Under-voltage load shedding is an important measure for maintaining voltage stability.Aiming at the optimal load shedding problem considering the load characteristics,firstly,the traditional under-voltage load shedding scheme based on a...
2012 / Jiyu Deng, Junyong Liu -
Entropy Generation in Liquid Desiccant Dehumidification System
Abstract In this paper, performance of the liquid desiccant dehumidification system in evaporation coolers was investigated by the Second Law of Thermodynamics analysis. This system was designed and manufactured for this purpose. Lithium chloride...
2012 / Hassan Pahlavanzadeh, Parisa Nooriasl -
Variable Parameter Equivalent Model of Transmission Line Based on Dual-port Norton Equivalence
Abstract Firstly, this paper proposes a variable parameter equivalent model based on dual-port Norton equivalence for the loadability of transmission line under operation condition, which can very well reflect the non-linearity and timevarying...
2012 / Xiaofeng Zhou, Yanling Wang -
Investigating the effect of blade sweep and lean in one stage of an industrial gas turbine׳s transonic compressor
Abstract In this paper, the simultaneous effects of the sweep and lean of the blades in one stage of a transonic compressor on its performance have been investigated. Then, with the help of numerical solution, fluid flows over these two modified...
2015 / M.A. Neshat, M. Akhlaghi, A. Fathi, H. Khaledi -
The discussion on optimization models of pure bending beam2013 / Heting Qiao, Haiyan Li
-
Factbase Filtering Issues in an Ontology-Based Reverse Engineering Tool Integration System
Abstract The Ontological Adaptive Service-Sharing Integration System (OASIS) facilitates reverse engineering tool interoperability by sharing services among tools that represent software in a conceptually equivalent manner. OASIS uses a domain...
2005 / Dean Jin, James R. Cordy -
Dual boundary method for assembled plate structures undergoing large deflection2011 / C. Di Pisa, M. H. Aliabadi, A. Young
-
High-Precision Calibration of a Weld-On-The-Fly-System
Abstract Since 20 years the importance of laser based material processing increases constantly due to its significant higher process speed in comparison to conventional processing technologies. A scanner system for laser-remote-welding mounted on a...
2011 / Claus Emmelmann, Kerstin Schenk, Jörg Wollnack, Marc Kirchhoff -
Temperature control of robotic friction stir welding using the thermoelectric effect2013 / Jeroen De Backer, Gunnar Bolmsjö, Anna-Karin Christiansson
-
Theoretical study on multiple holes grouting with natural boundary element method
Abstract Aiming at the cylinder grouting manner, according to the character of complex function, and based on the natural boundary element theory and Fourier series method, interaction problems of multiple holes grouting with arbitrary forms of...
2009 / Peng Wei-hong, Dong Zheng-zhu, Guo Chu-wen