Materials engineering topic list of research papers
-
Lithium barrier materials for on-chip Si-based microbatteries2017 / R. Janski, M. Fugger, M. Forster, M. Sorger, A. Dunst, et al.
-
Far-Infrared Emission Characteristics and Wear Comfort Property of ZrC-Imbedded Heat Storage Knitted Fabrics for Emotional Garments2016 / Hyun Ah Kim, Seung Jin Kim
-
Multiscale studies on the nonlinear vibration of delaminated composite laminates–global vibration mode with micro buckles on the interfaces2017 / Jianghong Xue, Fei Xia, Jun Ye, Jianwen Zhang, Shuhua Chen, et al.
-
A review on failure characteristics of polymer gear2016 / Wafiuddin Md Ghazali, Daing Mohamad Nafiz Daing Idris, Azizul Helmi Sofian, Januar Parlaungan Siregar, Ismail Ali Abdul Aziz
-
CryoTEM as an Advanced Analytical Tool for Materials Chemists2017 / Joseph P. Patterson, Yifei Xu, Mohammad-Amin Moradi, Nico A. J. M. Sommerdijk, Heiner Friedrich
-
Highly sensitive work function hydrogen gas sensor based on PdNPs/SiO 2 /Si structure at room temperature
Abstract In this study, fabrication of highly sensitive PdNPs/SiO2/Si hydrogen gas sensor using experimental and theoretical methods has been investigated. Using chemical method the PdNPs are synthesized and characterized by X-ray diffraction (XRD). ...
2017 / G. Behzadi pour, L. Fekri aval -
A Chronological Review of Professor Ueda's Works
Abstract This article chronologically reviews the works, achievements, and professional life accomplishment of Prof. Ueda, who passed away in November 2015. He had been interested in systems of artifacts. Starting with clarification of systems of...
2017 / Nariaki Nishino, Takeshi Takenaka, Nobutada Fujii -
A hybrid PSO-SVM-based model for determination of oil recovery factor in the low-permeability reservoir
Abstract Oil recovery factor is one of the most important parameters in the development process of oil reservoir, especially in the low-permeability reservoir. In general, the determination of recovery factor can be obtained either experimentally or ...
2017 / Bing Han, Xiaoqiang Bian -
Epitaxial growth of single-crystalline Ni46Co4Mn37In13 thin film and investigation of its magnetoresistance
Abstract Single-crystalline thin film of Ni46Co4Mn37In13 alloy grown on MgO(001) was prepared by Pulsed Laser Deposition (PLD) method. The epitaxial growth process was monitored by in situ Reflection High Energy Electron Diffraction (RHEED)....
2014 / Chao Jing, Yejun Yang, Xiaolong Wang, Pan Liao, Dong Zheng, et al. -
Realistic microstructure-based modelling of cyclic deformation and crack growth using crystal plasticity
Abstract Using crystal plasticity, finite element analyses were carried out to model cyclic deformation for a low solvus high refractory (LSHR) nickel superalloy at elevated temperature. The analyses were implemented using a representative volume...
2015 / F. Farukh, L.G. Zhao, R. Jiang, P. Reed, D. Proprentner, et al. -
Tilted fiber grating mechanical and biochemical sensors
Abstract The tilted fiber Bragg grating (TFBG) is a new kind of fiber-optic sensor that possesses all the advantages of well-established Bragg grating technology in addition to being able to excite cladding modes resonantly. This device opens up a...
2015 / Tuan Guo, Fu Liu, Bai-Ou Guan, Jacques Albert -
Active screen plasma surface co-alloying of 316 austenitic stainless steel with both nitrogen and niobium for the application of bipolar plates in proton exchange membrane fuel cells
Abstract Austenitic stainless steel has been researched as a promising candidate material for bipolar plates in proton exchange membrane fuel cells. However, its interfacial contact resistance (ICR) is about 16 times higher that of the Department of ...
2015 / Kaijie Lin, Xiaoying Li, Linhai Tian, Hanshan Dong -
Effects of casting process on microstructures and flow stress behavior of Mg–9Gd–3Y–1.5Zn–0.8Zr semi-continuous casting billets
Abstract Mg–9Gd–3Y–1.5Zn–0.8Zr alloys own high strength, good heat and corrosion resistance. However, it is difficult for the fabrication of large-scale billets, due to the poor deformation ability and strong hot-crack tendency. This work...
2014 / Xuan liu, Qichi Le, Zhiqiang Zhang, Lei Bao, Zhengxing Fan, et al. -
Modeling Barrier Tissues In Vitro: Methods, Achievements, and Challenges
Abstract Organ-on-a-chip devices have gained attention in the field of in vitro modeling due to their superior ability in recapitulating tissue environments compared to traditional multiwell methods. These constructed growth environments support...
2016 / Courtney M. Sakolish, Mandy B. Esch, James J. Hickman, Michael L. Shuler, Gretchen J. Mahler -
GaMin’11 – an International Inter-laboratory Comparison for Geochemical CO2 - Saline Fluid - Mineral Interaction Experiments
Abstract Due to the strong interest in geochemical CO2-fluid-rock interaction in the context of geological storage of CO2 a growing number of research groups have used a variety of different experimental ways to identify important geochemical...
2014 / Ostertag-Henning, A. Risse, B. Thomas, R. Rosenbauer, C. Rochelle, et al. -
Orange-red luminescence in KAl 1− x PO 4 F:Eu x 3+ (0.1 ≤ x ≤ 1.0) halophosphate phosphor by a novel facile combustion method
Abstract Red-emitting phosphor KAl 1-x PO4F:Eu x 3+ (0.1≤ x ≤1.0) were fabricated by combustion ...
2017 / Ashish Akojwar, K.N. Shinde, N.S. Kokode -
Method for Automatically Recognizing Various Operation Statuses of Legacy Machines
Abstract Monitoring the operation status of machine tools using IoT is widely carried out in order to improve productivity. However, at manufacturing sites, a lot of legacy machines, which are old and lack the capability of sending data on their...
2017 / Masaaki Maeda, Yuichi Sakurai, Tsuyoshi Tamaki, Youichi Nonaka -
Band and scattering tuning for high performance thermoelectric Sn1−xMnxTe alloys
Abstract The thermoelectric figure of merit zT of SnTe, an analogue to PbTe, has long been known to be about 0.6, mainly due to its single band transport behavior. Similar to what has been found in PbTe, alloying with group II monotellurides such as ...
2015 / Wen Li, Zhiwei Chen, Siqi Lin, Yunjie Chang, Binghui Ge, et al. -
In situ polarization and dielectric property measurements of Pb(Zr 0.52 Ti 0.48 )O 3 ferroelectric nanocrystals
Abstract Pb(Zr0.52Ti0.48)O3/polycarbonate (PZT/PC) composite films with different concentration of PZT ferroelectric nanocrystals are prepared. The polarization and dielectric relaxation behavior of PZT ferroelectric nanocrystals are characterized...
2017 / Haifa Zhai, Yurong Jiang, Hongjing Li, Panpan Zhang, Yixiao He, et al. -
A Holistic and DoE-based Approach to Developing and Putting into Operation Complex Manufacturing Process Chains of Composite Components
Abstract This paper presents model-based methods and algorithms for describing and analyzing complex technological interactions in production process chains for the manufacturing of composite materials and components. The presented holistic approach ...
2017 / Hajo Wiemer, Michael Schwarzenberger, Gunnar Dietz, Martin Juhrisch, Steffen Ihlenfeldt