Materials engineering topic list of research papers
-
Phase-field simulation of solidification dendritic segregation in Ti-45Al alloy2017 / Yu-tuo Zhang, Yun Chi, Chun-qing Hu
-
Studies on the thermal and electrical properties of polyethylene oxide/polyvinyl alcohol blend by incorporating of Cesium Chloride
Abstract The composites PVA/PEO filled with various concentrations of CsCl samples, which were prepared for using a solvent casting technique and studied via Fourier transform infrared spectroscopy (FTIR), ultraviolet – visible (UV–Vis), X-ray...
2017 / H.M. Ragab -
Design Implications towards Inspection Reduction of Large Scale Structures
Abstract Operational management is a key contributor in life cycle costs, especially for large scale assets which are in most times complex in structural hierarchy and with a large nominal service life. Decisions on the operational management may...
2017 / Anastasia Ioannou, Lin Wang, Feargal Brennan -
Impact of Three Axle Boxes Bogie to the Tram Behavior When Passing Curved Track
Abstract Ride of vehicles along curved track is a serious technical problem, which for the long term requires attention of vehicle engineers as well as track designers. It is especially interesting to observe behavior of tram cars passing a curved...
2017 / Vladimír Hauser, Olena Nozhenko, Kateryna Kravchenko, Mária Loulová, Juraj Gerlici, et al. -
Characterization of 24 microsatellite markers in Primula chungensis (Primulaceae), a distylous–homostylous species, using MiSeq sequencing
Abstract Primula chungensis is a species with considerable floral and mating-system variation, including distylous (outcrossing), homostylous (selfing) and mixed populations that contain both outcrossing and selfing forms. We...
2016 / Wei Zhou, Haidong Li, Zhikun Wu, Spencer C.H. Barrett, Dezhu Li, et al. -
Change of Crystallographic Orientation Characteristics of (001)-Oriented Electrodeposited Silver Films During Self-Annealing at Room Temperature
Abstract Self-annealing behaviors of the electrodeposited silver films which preferentially orient in the (001) direction were investigated by in situ EBSD analysis. Self-annealing started in storage for a few hours at room temperature (R. T.) and...
2017 / Yumi Hayashi, Ikuo Shohji, Shinji Koyama, Hiroshi Miyazawa -
Exergy Analysis for District Heating Network
Abstract An exergy factor analysis of the Ludza city district heating system (DHS) in Latvia is performed in the research paper. Calculated results of exergy factor are analysed in order to understand which parameters of district heating mostly...
2017 / Edvins Terehovics, Ivars Veidenbergs, Dagnija Blumberga -
Global change and local solutions: Tapping the unrealized potential of citizen science for biodiversity research
Abstract The collective impact of humans on biodiversity rivals mass extinction events defining Earth’s history, but does our large population also present opportunities to document and contend with this crisis? We provide the first quantitative...
2014 / E.J. Theobald, A.K. Ettinger, H.K. Burgess, L.B. DeBey, N.R. Schmidt, et al. -
PO-0764: A study of Tandem systems incorporating three thermoluminescent dosimetry materials2017 / V. Nelson
-
One-step facile synthesis of Pd nanoclusters supported on carbon and their electrochemical property
Abstract Well-crystallized Pd nanoclusters supported on Ketjen Black (KB) were successfully fabricated when Pd wires were served as an electrode pair by a solution plasma technique at atmospheric pressure. The synthesis of Pd nanoclusters was almost ...
2014 / Junjun Shi, Xiulan Hu, Jianbo Zhang, Weiping Tang, Hongtao Li, et al. -
Heterojunction and Passivated Contacts: A Simple Method to Extract Both n/tco and p/tco Contacts Resistivity
Abstract High fill factor value is still a hot topic in Heterojunction (HJT) solar cells. Despite major improvement regarding the metallization losses using a novel encapsulation scheme like the SmartWire approach [1], the other series resistance...
2016 / Damien Lachenal, Derk Baetzner, Walter Frammelsberger, Boris Legradic, Jerôme Meixenberger, et al. -
Thermomagnetic and magnetocaloric properties of metamagnetic Ni-Mn-In-Co Heusler alloy in magnetic fields up to 140 kOe2014 / Alexander Kamantsev, Victor Koledov, Elvina Dilmieva, Alexey Mashirov, Vladimir Shavrov, et al.
-
Tailoring characteristic thermal stability of Ni-Au binary nanocrystals via structure and composition engineering: theoretical insights into structural evolution and atomic inter-diffusion2014 / Bangquan Li, Guozhong Xing, Hailong Wang, Rongming Wang
-
Size effects on the Néel temperature of antiferromagnetic NiO nanoparticles2016 / Natalia Rinaldi-Montes, Pedro Gorria, David Martínez-Blanco, Antonio B. Fuertes, Inés Puente-Orench, et al.
-
The Influence Of Burner Locations In The Heating Furnace On The Charge Temperature Field2015 / M. Rywotycki, A. Szajding, Z. Malinowski, T. Telejko, A. Gołdasz, et al.
-
Methodology for the experimental measurement of vapor–liquid equilibrium distillation curves using a modified ASTM D86 setup
Abstract A method has been developed to determine experimental equilibrium distillation curves using a modified ASTM D86 distillation apparatus.The method determines accurate equilibrium initial boiling points and accounts for the dynamic holdup...
2016 / Alison M. Ferris, David A. Rothamer -
Machinability and Tribological Properties of Stir Cast LM6/SiC/GR Hybrid Metal Matrix Composite2016 / Montasser S. Tahat
-
Effect of Laser Beam Alloying Strategies on the Metallurgical and Mechanical Properties of Hot Forming Tool Steels
Abstract In terms of increasing lightweight designs of car body parts, the machining of high strength steels in hot stamping processes becomes of particular interest. Due to high process forces at hot stamping, the surface of such tools in the area...
2016 / Konstantin Hofmann, Franziska Neubauer, Matthias Holzer, Vincent Mann, Florian Hugger, et al. -
Large strain detection of SRM composite shell based on fiber Bragg grating sensor2017 / Lei Zhang, Xinlong Chang, Youhong Zhang, Fan Yang
-
Micromachining process – current situation and challenges2015 / Meet Rajeshkumar Lalakiya