Materials engineering topic list of research papers
-
Efficient primary and parametric resonance excitation of bistable resonators2016 / A. Ramini, N. Alcheikh, S. Ilyas, M. I. Younis
-
A high-efficiency tunable TEM-TE11 mode converter for high-power microwave applications2017 / Xiao-Yu Wang, Yu-Wei Fan, Ting Shu, Cheng-wei Yuan, Qiang Zhang
-
Induction hardening of tool steel for heavily loaded aircraft engine components2017 / P. Rokicki
-
The dynamic compressive behavior and constitutive modeling of D1 railway wheel steel over a wide range of strain rates and temperatures
Abstract The dynamic compressive behavior of D1 railway wheel steel at high strain rates was investigated using a split Hopkinson pressure bar (SHPB) apparatus. Three types of specimens, which were derived from the different positions (i.e., the...
2017 / Lin Jing, Xingya Su, Longmao Zhao -
Welding thermal cycle-triggered precipitation processes in steel S700MC subjected to the thermo-mechanical control processing2017 / J. Górka
-
Understanding and designing magnetoelectric heterostructures guided by computation: progresses, remaining questions, and perspectives2017 / Jia-Mian Hu, Chun-Gang Duan, Ce-Wen Nan, Long-Qing Chen
-
Notched Strength of Woven Fabric Kenaf Composites with Different Fiber Orientations2017 / Hilton Ahmad, Safwan Rahim
-
Evaluation of pore sizes in welded joints made in various constructional materials on the basis of penetrant testing by colour method2017 / J. Czuchryj, P. Irek
-
PbSe/CdTe single quantum well infrared detectors2017 / S. Chusnutdinow, M. Szot, T. Wojtowicz, G. Karczewski
-
Optimization of a thin-walled element geometry using a system integrating neural networks and finite element method2017 / P. Golewski, J. Gajewski, T. Sadowski
-
Probing the strain distribution within a single crystal superalloy during high temperature testing2014 / Alain Jacques, Mohamed Biskri, Thomas Schenk, Jean Philippe Chateau Cornu, Pierre Bastie
-
Intelligent Pattern Recognition of a SLM Machine Process and Sensor Data
Abstract Selective Laser Melting is an additive manufacturing process, in which the research has been increasing over the past few years to meet customer-specific requirements. Therefore, new manufacturing parameters have been monitored raising the...
2017 / Eckart Uhlmann, Rodrigo Pastl Pontes, Abdelhakim Laghmouchi, André Bergmann -
Hybrid Additive Design of FRP Components – Fiber-Reinforced Sandwich Structures Based on Selective Laser Sintering Technology
Abstract With the demand for an increasing diversification of the product spectrum along with the decreasing unit quantities of each production lot, the upcoming innovative production concepts of a flexible and digitized production (“fourth...
2017 / Jerome Kaspar, Tobias Häfele, Carsten Kaldenhoff, Jürgen Griebsch, Michael Vielhaber -
Lifing the thermo-mechanical fatigue (TMF) behaviour of the polycrystalline nickel-based superalloy RR10002014 / Jonathan Jones, Mark Whittaker, Robert Lancaster, Stephen Williams
-
High Speed Machining of Inconel 718: Tool Wear and Surface Roughness Analysis
Abstract Inconel 718 is a Nickel based Heat Resistance Super Alloy (HRSA) widely used in many aerospace applications. It possesses good properties like corrosion resistance, high strength and exceptional weldability. It is considered as one of the...
2017 / D.M. D’Addona, Sunil J. Raykar, M.M. Narke -
Tensile strain-induced softening of iron at high temperature2015 / Xiaoqing Li, Stephan Schönecker, Eszter Simon, Lars Bergqvist, Hualei Zhang, et al.
-
On the effect of temperature on the threshold stress intensity factor of delayed hydride cracking in light water reactor fuel cladding
Abstract Delayed hydride cracking (DHC) was first observed in pressure tubes in Canadian CANDU reactors. In light water reactors, DHC was not observed until the late 1990s in high-burnup boiling water reactor (BWR) fuel cladding. In recent years,...
2017 / Anna-Maria Alvarez Holston, Johan Stjärnsäter -
Numerical simulation of airflow distribution in mine tunnels
Abstract Based on 3D modelling of typical tunnels in mines, the airflow distribution in a three-center arch-section tunnel is investigated and the influence of air velocity and cross section on airflow distribution in tunnels is studied. The average ...
2017 / Cui Ding, Xueqiu He, Baisheng Nie -
Correlation between Compressive Strength and Fire Resistant Performance of Rice Husk Ash-Based Geopolymer Binder for Panel Applications2017 / Mohd Salahuddin Mohd Basri, Norkhairunnisa Mazlan, Faizal Mustapha, Mohamad Ridzwan Ishak
-
An Investigation of Temperature and Heat Partition on Tool-chip Interface in Milling of Difficult-to-Machine Materials
Abstract It is particularly of importance to determine temperature and heat partition on tool-chip interface in milling of difficult-to-machine materials, because they have great effect on machining process. In this paper, a new analytical method is ...
2017 / Cui Di, Zhang Dinghua, Wu Baohai, Luo Ming