Materials engineering topic list of research papers
-
Enhancement of the Mechanical Properties of Basalt Fiber-Wood-Plastic Composites via Maleic Anhydride Grafted High-Density Polyethylene (MAPE) Addition2013 / Jinxiang Chen, Yong Wang, Chenglong Gu, Jianxun Liu, Yufu Liu, et al.
-
First-principles study of optical properties in Ca-doped ZnO alloys2012 / Li-Na Bai, Jian-She Lian, Wei-Tao Zheng, Qing Jiang
-
In-situ TEM observation of microstructural evolution in 18Cr-ODS steel induced by electron beam irradiation
Abstract The microstructural evolution behaviors of 18Cr-ODS steel under electron beam irradiation were in-situ investigated in a high resolution transmission electron microscopy (HRTEM). Fe3O4 particle was induced by electron beam irradiation...
2012 / Guang Ran, Shenghua Wu, Zhangjian Zhou, Rui Qiang, Ning Li, et al. -
Static and Dynamic Analysis of Thermal Cross-Talk in an Thermopile Detector Array for use in an Microspectrometer
Abstract The spectral resolution of a MEMS-based Infrared (IR) microspectrometer with a plainer grating for projection of dispersed light on a detector array critically depends on the thermal cross-talk between adjacent Thermo-Electric (TE) elements ...
2009 / H. Wu, A. Emadi, S. Grabarnik, G. de Graaf, RF Wolffenbuttel -
Thermal Characterization of Polycrystalline CVD Diamond Thin Films
Abstract An experimental thermal characterization method is developed for high thermal conductivity thin films. The method utilizes Ta/Pt resistors on microfabricated free-standing thin film structures both for heating and temperature monitoring at...
2009 / S. Lani, C. Ataman, W. Noell, D. Briand, N. de Rooij -
Block-Entropy Analysis of Climate Data
Abstract We explore the use of block entropy as a dynamics classifier for meteorological timeseries data. The block entropy estimates define the entropy growth curve H(L) with respect to block length L. For a finitary process, the entropy growth...
2011 / J. Walter Larson, Peter R. Briggs, Michael Tobis -
Design, modelling and simulation of a High Frequency MEMS Gyroscope in 1.5um SOI
Abstract In this paper, a simulation model of a MEMS gyroscope is presented. The model enables mode matching and analysis of the dynamic behavior of a gyroscope. Furthermore, the model allows the optimization the design parameters of the gyroscope....
2009 / P.J. Ngana, J.J. Koning, P.J. French, J.J.M Bontemps, K. Seetharaman -
The Conservation of a Painting. Case Study: Cornel Minişan, “Landscape from Caransebeş” (Oil on Canvas, 20th Century)
Abstract This paper presents a case study of the conservation of an oil painting produced by the Romanian inter-war painter Cornel Minisan in the 1930s One of the main problems of the art-work for which I had to find an appropriate solution, was the ...
2013 / Ioan Paul Colta -
Nanocrystalline ZrB2 powders prepared by mechanical alloying
Abstract ZrB2 powders were synthesized by mechanical alloying (MA) of the mixture of elemental Zr and B powders using WC vial and balls. The effect of the initial composition, the milling time on MA and the phase changes during MA were investigated. ...
2013 / Wen-Wen Wu, Guo-Jun Zhang, Yoshio Sakka -
Analysis and Simulation of Laser Polarization Characteristics on Metal Surface in Short-Range Detection
Abstract In view of using only the intensity information of retroreflection wave and poor capacity of anti-interference in laser short-range detection, this paper analyzes the polarization characteristics of laser beam on the metal surface and...
2013 / Yu-ying Yang, Zhan-zhong Cui, Shuang-cheng Wei -
Ultrasound Flow Sensor Based on Arrays of Piezoelectric Transducers Integrated in a Composite
Abstract The functionalization of fiber-reinforced polymer composites by integration of piezoelectric transducers allows for both the measurement and the excitation of guided waves within the component. A common use for guided waves in composite...
2013 / Andreas Kunadt, Günther Pfeifer, Wolf-Joachim Fischer -
Optimization of RED Test Cell for PVA Based Ion-Exchange Membranes2012 / S. Fujii, K. Takeichi, M. Higa
-
Novel Liquid Phase Peptide Synthesis (LPPS) Technology: Elongation using Organic Solvent Nanofiltration (OSN)2012 / W.Q. Chen, M. Cristau, M. Giraud, A.G. Livingston
-
Disassembly Matrix for Liquid Crystal Displays Televisions
Abstract Waste Electrical and Electronic Equipment (WEEE) are one of the most significant waste products in modern societies. Disassembly is a critical step to reduce Electrical and Electronic Equipment (EEE) waste. In the past two decades, despite...
2013 / G.Q. Jin, W.D. Li, K. Xia -
Systems Engineering Methodology for Linking Requirements to Design Complexity and Manufacturing Trade Space Constraints
Abstract Aerospace system requirements over the last decade have continued to evolve toward higher levels of performance at lower cost, incurring a major challenge for system developers; how to balance conflicting performance and cost requirements...
2013 / Tyler Milner, Michael Volas, Albert Sanders -
Simulation Tool for the Prediction of Compound Dependence of CW-Photoacoustic-based Sensor using Dual Differential Optical Excitation
Abstract Towards the development of a sensor dedicated to noninvasive and continuous blood glucose level monitoring, we developed a protocol called optical power balance shift based on a continuous-wave photoacoustic technique using a dual...
2012 / S. Camou, Y. Ueno, E. Tamechika -
AlGaN/GaN HEMT Based Hydrogen Sensors With Gate Absorption Layers Formed by High Temperature Oxidation
Abstract We present a new approach in design of high temperature stable AlGaN/GaN HEMT gate absorption layers for hydrogen sensing at elevated temperature. To suppress undesirable chemical interaction of Pt on the gate interface, a thin conductive...
2012 / I. Rýger, G. Vanko, P. Kunzo, T. Lalinský, M. Vallo, et al. -
Effect of Notch on Creep Behavior of 316L(N) SS
Abstract Creep tests on 316 L (N) stainless steel notched specimens with varying notch acuity were carried out and notch effect was studied. Various multiaxial stress states were generated by providing circumferential V-notch. The tests were car ied ...
2013 / S.R. Charde, A.R. Ballal, D.R. Peshwe, M.D. Mathew, R.K. Paretkar -
Fundamental Study on Sputter Deposition of Ceramic Film by Large-Area Electron Beam Irradiation
Abstract The sputter deposition of ceramic film on metal mold steel surface by large-area electron beam (EB) irradiation was discussed. The large-area EB has high energy density enough to generate plasma above the workpiece surface during the...
2013 / S. Misumi, A. Okada, Y. Okamoto, M. Inoue -
Topological Optimisation of Scaffolds for Tissue Engineering
Abstract Advanced additive manufacturing technologies, namely Biomanufacturing, are being used to fabricate scaffolds with controlled architecture for tissue engineering applications. These technologies combined with computer-aided design (CAD)...
2013 / Henrique A. Almeida, Paulo J. Bártolo