Materials engineering topic list of research papers
-
Suitability of the ISO 10303-207 Standard for Product Modeling of Line Linked Micro Parts
Abstract An approach for overcoming negative influences of scaling effects in micro production is the manufacturing of micro parts in a linkage. Due to the linkage a process reliable handling is enabled and chaining of the single process steps for...
2012 / K. Tracht, F. Weikert, T. Hanke -
Semi-active Control of Base Isolation with Energy Transition Control Device
Abstract The semi-active control of base isolation with energy transition control divice(ETCD) is established by installing the ETCD between the isolation floor and the ground. Theoretical models of the ETCD and the control system are finished and...
2011 / Cheng Shuliang, Xin Yajun, Wang Yanwu -
Analytical Study on Significance of Corroded Surface Measurement on Residual Strength Prediction
Abstract The maintenance and safety of the existing bridges is an important concern of all highway and railroads. To assure adequate safety and determine the ongoing maintenance needs, thorough regular inspections are required. These inspections...
2011 / J.M.R.S. Appuhamy, T. Kaita, M. Ohga, K. Fujii -
Investigation of the Parameters of Hertz Impact Model for the Pounding Analysis of Highway Bridge
Abstract Under the strong earthquake ground motions, the adjacent buildings with small distance and the highway bridges with expansion joints are sensitive to the pounding damage. Contact element approach was usually used to analyze the structure...
2011 / L.L. Cui, A.X. Guo, H. Li -
ALARP (A Railway Automatic Track Warning System Based on Distributed Personal Mobile Terminals)
Abstract The ALARP (A railway automatic track warning system based on distributed personal mobile terminals) project has the aim to study, design and implement an innovative more efficient Automated Track Warning Systems with the intent of overcome...
2012 / Antonio Andrea Seminatore, Luca Ghelardoni, Andrea Ceccarelli, Lorenzo Falai, Michael Schultheis, et al. -
Silicon nanowires synthesis for chemical sensor applications
Abstract Silicon nanowires (SiNWs) are synthesized following two methods: (i) the VLS (Vapor-Liquid-Solid) growth technique (bottom up approach), and (ii) the sidewall spacer fabrication (top down approach) commonly used in microelectronic industry. ...
2010 / F. Demami, L. Ni, R. Rogel, A.C. Salaun, L. Pichon -
Deformation monitoring during removal of the supporting of T-type rigid frame bridge constructed by rotation method
Abstract Rotation construction of a bridge is an effective construction method, when a bridge across the highway, railway, river, canyon, or other special conditions such as existing building. First of all, beams are manufactured to the shore, or on ...
2010 / Lanchao Jiang, Ri Gao -
Selectivity problem of metal oxide based sensors in the presence of water vapors
Abstract We report our recent results on comparative analysis of sensing properties for two-component nanodispersed oxide systems: SnO2–MetO x (Met=Ti, Zr, Hf, Y and La) and SnO2-noble metals (Pt, Pd,...
2010 / R.G. Pavelko, A.A. Vasiliev, E. Llobet, X. Vilanova, V.G. Sevastyanov, et al. -
Effect of Aging Temperature and time on the Transformation Behavior of a Ti-50.8 at.% Ni Alloy with Small Grains
Abstract A Ti-50.8 at.% Ni alloy with small grains (average grain size of 1.8μm) was subjected to various aging treatments. It is found that the frequently reported multi-stage martensitic transformation, i.e. the transformation including two B19’...
2015 / X. Wang, B. Verlinden, J. Van Humbeeck -
Advantages of Picosecond Laser Machining for Cutting-Edge Technologies
Abstract The demand to reduce the size, weight and material cost of modern electronic devices results in a requirement for precision micromachining to aid product development. Examples include making smaller and more powerful smartphones with...
2013 / C. Moorhouse -
New Insights into the Thermal Expansion of Neptunium Dioxide up to 2000K
Abstract We report for the first time the thermal expansion of NpO2 up to 2000K and compare it to the one of UO2 and PuO2. Lattice parameters were measured as a function of temperature by in situ X-ray diffraction with neutral, reducing and...
2012 / Mélanie Chollet, Renaud C. Belin, Jean-Christophe Richaud, Frédéric Adenot -
Preliminary Design of Hybrid Energy Reactor and Related Nuclear Fuel Cycle
Abstract We propose a preliminary design for a fusion-fission hybrid energy reactor (FFHER), based on current fusion science and technology and well-developed fission technology. We list design rules and put forward a primary concept blanket, with...
2012 / Maosheng Li, Haibing Guo, Jimin Ma, Xueming Shi, Xianjue Peng -
Remote sensing for early warning of natural meteorological and hydrological disasters and provision of transportation safety over the Black Sea in Georgia
Abstract The effectiveness of the use of satellite information for the early warning of meteorological and hydrological disasters and provision of transportation safety on the Black Sea in Georgia were investigated. The research of determination of...
2011 / G. Kordzakhia, L.Shengelia, G. Tvauri, M. Tatishvili, I. Mkurnalidze -
Preparation and Characteristics of Cu-Al<sub>2</sub>O<sub>3</sub> Nanocomposite2011 / F. Shehata, M. Abdelhameed, A. Fathy, M. Elmahdy
-
A Special FCL Clustering and Its Application to Sparse Blind Source Separation
Abstract Fuzzy c-Lines (FCL) algorithm is a linear fuzzy clustering algorithm and is constructed to treat linear dates and capture linear substructures. This paper considers a special FCL clustering algorithm, then based on the special FCL...
2011 / Yu Tong, Yunjie Zhang -
Design the Evolutionary Algorithms Kernel in Adaptive Systems
Abstract There are some problems in the implementation of adaptive systems, which are the design complexity related to the problems. In this paper, through analyze the structure of adaptive systems, we divide the evolutionary system into two parts,...
2011 / Xuesong Yan, Huihui Zhang, Jianfei Wu, Wei Li, Yuzhen Zhang -
Building, Application and Realization of Quadratic Interpolation Polynomial with Lagrange Substrate
Abstract Interpolation is one of the important methods of function approximation, and it has been widely used. It was expounded in detail that the basic principles to construct quadratic interpolation polynomials with Lagrange substrate in this...
2011 / Jing-hua Wen, Mei Zhang, Wei Xiao -
Software reliability analysis of Hierarchical architecture based on Markov model
Abstract In this work, a Markov-based model is proposed for the reliability estimation of hierarchical architecture system. This model is suggested to replace the traditional one RBD (Reliability Block Diagram), the parameter of which is hard to...
2011 / Ying Wei, Libo Wang, MingQian Wang -
Investigating the effect of drama activity called “mirrors and their usage” to student succession developed according to elaborating stage of 5e model
Abstract This study was conducted in order to find the effect to 6th grade students’ succession by using the activity called “Mirrors and Their Usage” which is covered in 6th grade, “Light and Sound” chapter. The activity was developed considering...
2009 / Hakan Sevki Ayvacı, Barıs Can Yılmaz -
ZrSiO4 Oxidation Protective Coating for SiC-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying2013 / Can Sun, He-jun Li, Qian-gang Fu, Hai-liang Li, Yong-jie Wang, et al.