Materials engineering topic list of research papers
-
Safety Entropy Research of Working Environment Parameters in Plateau Non-coal Underground Mine
Abstract Working environment in plateau non-coal underground mine was considered to be an open safety system. Maintenance and evolution of dissipative structure in ventilation system was used as the theoretical basis of operation mechanism for...
2012 / Liu Jie, Yang Peng, Lv Wensheng -
Current Status and Future Perspective of Waste Printed Circuit Boards Recycling
Abstract For waste electrical and electronic equipment (WEEE), large quantities of waste printed circuit boards (PCBs) are released into environment. In light of their characteristics including complex structures, high metals content and potential...
2012 / Xianlai Zeng, Lixia Zheng, Henghua Xie, Bin Lu, Kai Xia, et al. -
The Products Characteristics of Calcium-basic Compounds Pyrolysis with Waste Printed Circuit Boards (PCB)
Abstract The co-pyrolysis of PCB and calcium-basic compounds was investigated in this paper. The yield of liquid products of simple PCB pyrolysis was the highest and it reached 10.51%. After adding various calcium based waste, the copper foil was...
2012 / Jie Guan, Jingwei Wang, Xu Min, Wenjie Wu -
Reliability Measures of Constant Pitch Constant Speed Wind Turbine with Markov Analysis at High Uncertain Wind
Abstract In order to increase the life of a wind turbine (WT), it is important to estimate the reliability level for all WT components. In this paper, the concept of Markov analysis (MA) is used to model the failure characteristics of the major...
2012 / T. Sunder Selwyn, R. Kesavan -
Improved Heading Direction Interpretation via Optical Flow Using Selected Region of Interest
Abstract In this paper, a technique of motion processing and analysis based on optical flow to gather information of heading direction from a vision system is presented. Instead of using the complete frame to determine the heading direction, in this ...
2012 / Zairulazha Zainal, Rizauddin Ramli, Mohd Marzuki Mustafa -
Homology Modeling of P-glycoprotein for Detecting Remote Protein Homologies
Abstract Proteins are polymers of amino acids and an important class of biological macromolecules present in all organisms. P-glycoprotein (P-gp) is one of the xenobiotic transport proteins implicated in multidrug resistance in neoplastic tissues....
2012 / Anurag Pal, Debahuti Mishra, Shruti Mishra, Sandeep Kumar Satapathy -
Simulation of Production Setup Changes in an SME
Abstract This case study demonstrates how a simple simulation model can help Small and Medium Size manufactures to identify current and future possible problem areas and assist management in taking the best possible decisions regarding future...
2012 / Hans-Henrik Hvolby, Carsten Svensson, Kenn Steger-Jensen -
Gas Sensors Based on Tin Dioxide for Exhaust Gas Application, Modeling of Response for Pure Gases and for Mixtures
Abstract This paper concerns tin dioxide gas sensors for automotive exhaust gas application. It consists in elaborating robust sensors on alumina substrate by screen-printing technology. Sensors have been tested on a synthetic gas bench which is...
2012 / J.P. Viricelle, A. Valleron, C. Pijolat, P. Breuil, S. Ott -
Transceiver Designs for Multiuser Two-Way Relay Systems
Abstract Besides the two-user case, the two-way relaying can be extended to the multiuser system to improve the spectrum efficiency. In this study, we aim to design the precoding for the cellular two-way relay system where a based station intends to ...
2012 / Guowen Ye, Rui Wang -
Examination of Zinc Oxide Films Prepared by Magnetron Sputtering
Abstract Nano-structured zinc oxide thin films were deposited on corning glass substrate by magnetron sputtering process. Zinc oxide films were deposited at different gas ratio values of argon:oxygen kept at 2sccm:18sccm, 6sccm:14sccm, 10sccm:10sccm ...
2016 / Pranav Y. Dave, Kartik H. Patel, Kamlesh V. Chauhan, Amit Kumar Chawla, Sushant K. Rawal -
Creep Transition of a Thin Rotating Annular Disk of Exponentially Variable Thickness with Inclusion and Edge Load
Abstract Creep stresses have been obtained for a thin rotating disc of exponentially variable thickness with inclusion and edge load using Seth's transition theory. From the numerical results, it has been observed that for the rotating disc made of...
2013 / Sanjeev Sharma, Ila Sahai, Ravindra Kuma -
Glows and shadows of thermal insulation2013 / Mark Bomberg
-
Slip sliding away2013 / David Bradley
-
A Distributed Sensors System for More Effective Sailing Training
Abstract A training yacht with a distributed sensors net for multi-parametric recording and processing of the work of small (< 24”) sail yacht and her crew has been designed and built. Real-time data system is able to support training of sailors. ...
2012 / I. Augustyniak, M. Prorok, P. Knapkiewicz, J. Dziuban -
High Pressure Regeneration of MDEA in Membrane Gas-liquid Contactor2012 / S. Bazhenov, A. Lysenko, G. Dibrov, V. Vasilevsky, V. Khotimsky, et al.
-
Toward to Recurrent Form of the Impulse Response of UFIR Filters
Abstract In this paper, we present a new scheme to determining the impulse response function using the recursive relation in the Unbiased Finite Impulse Response (UFIR) filters. The theory of Discrete Orthogonal Polynomials (DOP) is considered here...
2013 / L.J. Morales-Mendoza, Y. Shmaliy, M. Gonzalez-Lee, E. Morales-Mendoza, R. Varguez-Fernández -
Peculiar aging response of near β Ti–25 Nb–2Mo–4Sn alloy for biomedical applications
Abstract In this paper, aging response of a recently developed near β Ti–25Nb–2Mo–4Sn (wt%) alloy with high strength and low modulus was investigated intensively. The experimental results from X-ray diffraction and transmission electron microscopy...
2013 / Shun Guo, Bin Chen, Qingkun Meng, Ruiwen Zhao, Xinqing Zhao -
Surface Integrity of High Speed Milling of Al/SiC/65p Aluminum Matrix Composites
Abstract The surface quality of components produced through milling of particle reinforced aluminum matrix composites (PRAMCs) is one of the most important factors influencing their practical performance. Therefore, the increasing applications of...
2013 / T. Wang, L.J. Xie, X.B. Wang, L. Jiao, J.W. Shen, et al. -
Buoyancy Driven Natural Convection Flow in an Enclosure with Two Discrete Heating from below
Abstract Natural convection flow of air in a two-dimensional, rectangular enclosure with two discrete heating from below is studied numerically, using the stream function-vorticity formulation of the Navier-Stokes and energy equations. An implicit...
2013 / Fahad Sadekin Zaman, Tanmoy Saha Turja, Md. Mamun Molla -
Operational loads on sport bicycles for possible misuse
Abstract Especially for carbon fiber sport bicycle frames and components the existing standards for fatigue tests dońt satisfy the needs to ensure the athletes safety as numerous failure cases in field show. In order to determine realistic loading...
2011 / Christin Hölzel, Franz Hoechtl, Veit Senner