Materials engineering topic list of research papers
-
Large-Area Laser-Lift-Off Processing in Microelectronics
Abstract Laser lift-off is an enabling technology for microelectronics growth markets such as light emitting diodes, densely packaged semiconductor devices, and flexible displays. For example, thin film transistor structures fabricated on top of...
2013 / R. Delmdahl, R. Pätzel, J. Brune -
Characterisation of PCL and PCL/PLA Scaffolds for Tissue Engineering
Abstract This paper investigates the use of PCL and PCL/PLA scaffolds produced using a novel additive biomanufacturing system called BioCell Printing. PCL/PLA blends were prepared using melt blend and solvent casting techniques. Scaffolds with 0/90° ...
2013 / T. Patrício, M. Domingos, A. Gloria, P. Bártolo -
Endocytosis mechanisms and the cell biology of antigen presentation
Recent evidence revealed that presentation of soluble antigens is governed by the endocytosis mechanisms that determine the intracellular routing of the endocytosed antigens. Soluble antigens intended for classical exogenous MHC-II-restricted presentation are...
2008 / Sven Burgdorf, Christian Kurts -
Mixed Metal Oxides with the Structure of Perovskite for Anticorrosion Organic Coatings
Abstract Mixed metal oxides pigments of TiO2.ZnO, 2TiO2.ZnO, Zn2TiO4, MgTiO3, CaTiO3, TiO2.ZnO.MgO, and TiO2.ZnO.SrO were synthesized from corresponding oxides or carbonates at high temperature. The obtained metal mixed oxides were characterized by...
2013 / M. Kantorová, D. Veselý -
Thermal model with phase change for process parameter determination in laser surface processing
Abstract Despite the fast evolution of lasers in recent years, one of the main drawbacks for the implementation of surface laser treatment processes in industry is the previous experimentation necessary to get optimum process parameters. In order to ...
2010 / E. Ukar, A. Lamikiz, L.N. López de Lacalle, S. Martinez, F. Liébana, et al. -
Influence of Si(111) √3×√3 - R30 ° -Sb surface phase on the formation and conductance of low-dimensional magnesium silicide layer on Si(111) substrate
Abstract Using electron energy loss spectroscopy, Raman spectroscopy, and conductance measurements in the temperature range 20–500 K we have investigated doping of two-dimensional Mg silicide using the Sb surface phase. The doping process was...
2011 / Dmitry L. Goroshko, Konstantin N. Galkin, Nikolay G. Galkin -
Laser Beam Welding with High-Frequency Beam Oscillation: Welding of Dissimilar Materials with Brilliant Fiber Lasers
Abstract Brilliant laser beam sources in connection with a high frequent beam oscillation make it now possible to join metallic material combinations, which have been conventionally non-laser weldable up to now. It concerns especially such...
2011 / Mathias Kraetzsch, Jens Standfuss, Annett Klotzbach, Joerg Kaspar, Berndt Brenner, et al. -
A Study on the Dynamic Mechanism Encouraging the Development of New Energy Industry
Abstract The new energy industry is a complex system and its normal operation needs strong, stable and l asting driving forces. The driving forces contain technology progress, market demand, construction of industry chain, government policy and...
2011 / MA Yunze -
Controlled Freeze Zone™ for developing sour gas reserves
Abstract The Controlled Freeze Zone™ technology removes CO2 and H2S from natural gas in a single step cryogenic distillation process. Removal and management of acid gas impurities from natural gas pose significant challenges in developing sour gas...
2011 / B.T. Kelley, J.A. Valencia, P.S. Northrop, C.J. Mart -
Using contextual analysis method to predict new energy development of Hohhot
Abstract Contextual analysis method is used to predict new energy development of Hohhot from 2010 to 2020. Through the structure of different scenarios, we could predict that the new energy in the total energy consumption will reach the proportion...
2011 / LI Changqing, DUAN Wei -
Controlling parameter for wave types of long flexible cable undergoing vortex-induced vibration
Abstract Submerged floating tunnel (SFT) is a popular concept of crossing waterways. The failure of the cable may occur due to vortexinduced-vibration (VIV), and the stability of the cable is crucial to the safety of the entire tunnel. Investigation ...
2010 / Liwu Zhang, Weimin Chen, Zhongqin Zheng -
Protection Engineering Construction and Capability Analysis of FDS Parallel Computing Environment
Abstract The fire field model FDS can get more details of distribution of physical quantities and its process, so FDS has been widely used in the Performance-based design. To improve computing speed of the software, Based on MPI (Message Passing...
2011 / ZHAO Zhe, YAO Hao-wei, LIANG Dong, HU Zhi-jian -
Homogeneous biosensor based on optical detection of the rotational dynamics of anisotropic nanoparticles
Abstract We introduce a novel biosensor concept, which employs hybrid nanoparticles consisting of magnetic nanorods encapsulated by noble metal shells. These nanoparticles have the potential to directly signal the presence of analyte molecules in...
2010 / Stefan Schrittwieser, Joerg Schotter, Thomas Maier, Roman Bruck, Paul Muellner, et al. -
Fatigue properties of duplex-aged Ti 38-644 metastable beta titanium alloy
Abstract Solute-rich beta titanium alloys such as Ti 38-644 (Beta- CTM) are known for an inhomogeneous precipitation of the strengthening alpha phase during aging. Consequently precipitate-free zones, referred to as “ β ...
2010 / A. El Chaikh, P. Schmidt, H.-J. Christ -
Feasibility studies on various SFT in Japan and their technological evaluation
Abstract Submerged floating tunnel (SFT) has been thought as a promising crossing technology and been studied in many countries for its realization. SFT has superior advantages to conventional crossing technologies such as bridge or subsea tunnel...
2010 / Shunji Kanie -
The Measurement of Ellipsometric Parameter of Various Liquid using a Polarization State Control Technique
Abstract The polarization control technique, which is considered as a technique for controlling the state of polarization of light, was studied for a potential of the optical measurement on liquid of interest. In this research, modulation method was ...
2011 / Suebtarkul Suchat, Napaporn Sridet, Benyapa Jewprasoet, Paiboon Viriyavathana, Pairote Jaideaw, et al. -
Implementation of strain-life fatigue parameters estimation methods in a web-based system
Abstract In order to address problems connected with the choice of a proper material during early stages of product development when limited or no experimental data on candidate materials are available, a web-based information system consisting of...
2011 / Robert Basan, Marina Franulovic, Domagoj Rubeša, Ivan Prebil -
Defect tolerance of a gamma titanium aluminide alloy
Abstract The fatigue properties of a Ti-48Al-2Cr-2Nb alloy obtained by electron beam melting (EBM) with a patented process has been examined by conducting high cycle fatigue tests performed at different loading ratios at room temperature. Fatigue...
2011 / M. Filippini, S. Beretta, L. Patriarca, G. Pasquero, S. Sabbadini -
Evaluation of interfacial fracture toughness and friction coefficient in the single fiber fragmentation test
Abstract Single fiber fragmentation test is extensively employed to characterize the fiber-matrix interface in composites. A novel technique for evaluating fracture toughness and friction coefficient at the fiber-matrix interface in an epoxy sample...
2011 / E. Graciani, J. Varna, V. Mantič, A. Blázquez, F. París -
The spring constant calibration of the piezoresistive cantilever based biosensor
Abstract Piezoresistive microcantilevers are widely applied to measurements of low forces, masses and viscosity [1]. After surface functionalization they might be used as a biochemical sensors being capable of the intermolecular force investigation. ...
2010 / G. Jóźwiak, D. Kopiec, P. Zawieruch, T. Gotszalk, P. Janus, et al.