Materials engineering topic list of research papers
-
Mixed Convection Heat Transfer inside a Square Cavity Filled with Cu-water Nanofluid
Abstract In the present study, mixed convection heat transfer inside a square cavity filled with Cu-water nanofluid has been investigated numerically. The bottom wall of the cavity is maintained at a constant high temperature while the vertical...
2015 / Mohammad Nasim Hasan, Khondokar Samiuzzaman, S. Hayatul Haque, Sumon Saha, Md. Quamrul Islam -
PAMAM dendrimers as promising nanocarriers for RNAi therapeutics
Therapeutics based on RNA interference mechanisms are highly promising for the management of several diseases including multi-drug resistant cancers. However, effective delivery of siRNAs and oligonucleotides still remains challenging. In this regard,...
2015 / Prashant Kesharwani, Sanjeev Banerjee, Umesh Gupta, Mohd Cairul Iqbal Mohd Amin, Subhash Padhye, et al. -
A new combinatorial approach to assess the influence of alloy composition on the oxidation behavior and concurrent oxygen-induced phase transformations for binary Ti–xCr alloys at 650°C
Abstract Poor oxidation performance of Ti-based alloys is an important life-limiting factor for high temperature applications. In this paper, a combinatorial approach is used to investigate systematically the influence of composition and time on the ...
2015 / Peyman Samimi, Yue Liu, Iman Ghamarian, David A. Brice, Peter C. Collins -
A comparison study of applying metallic coating on SiC particles for manufacturing of cast aluminum matrix composites2015 / R. Taherzadeh Mousavian, S. R. Damadi, R. Azari Khosroshahi, D. Brabazon, M. Mohammadpour
-
Development and Application of Mobile Digital Speckle Interferometer for Vibrometer Model Sample Honeycomb
Abstract The problems of the development of mobile digital speckle interferometer with a cw laser to obtain the vibration characteristics of the full-size structures in factory laboratories. Given the results of the use of the mobile testing...
2015 / E.V. Shakhmatov, O.A. Zhuravlev, R.N. Sergeev, A.I. Safin -
Properties of CaO-ZrO2 Based Composites
Abstract Composites of ZrO2-CA2 were sintered by the conventional technique at 1400° C from mixtures of m-ZrO2 with different amounts of high alumina cement containing CaO. The effect of the change in the composition on some properties such as:...
2015 / Yesica L. Bruni, Liliana B. Garrido, Esteban F. Aglietti -
Study of (NH4)3TiF6 Electrolysis in LiF-NaF-KF Melt
Abstract The scope of the research is the possibility of winning titanium metal using electrolysis in molten alkali metals at the temperature of 550..700 deg. C. The resulting powder Ti composition is determined using spectral analysis methods and...
2014 / F.A. Voroshilov, V.V. Luft, A.S. Usanova -
High Temperature Mechanical Behavior of Porous Cordierite-based Ceramic Materials Evaluated Using 3-point Bending
Abstract Cordierite-based ceramics are an important segment of the present ceramic industry. In the last years, cordierite-based porous ceramics have received great attention as light structural materials, thermal insulting and catalyst supports,...
2015 / Sebastián E. Gass, María Laura Sandoval, Mariano H. Talou, Analía G. Tomba Martinez, María Andrea Camerucci, et al. -
Hybrid Energy Storage Systems for Renewable Energy Applications
Abstract The paper gives an overview of the innovative field of hybrid energy storage systems (HESS). An HESS is characterized by a beneficial coupling of two or more energy storage technologies with supplementary operating characteristics (such as...
2015 / Thilo Bocklisch -
Mathematical Model of Network Address Translation Port Mapping
Abstract Network address translation (NAT) traversal is a critical technology for real-time video streaming between two endpoints. The port predictive algorithm of the NAT mapping rule is the core of NAT traversal. However, most port predictive...
2014 / Bing-Jhih Yao, Shaw-Hwa Hwang, Cheng-Yu Yeh -
Dragline Retrofit for AC Motion Power
Abstract The mining industry is changing rapidly due to mergers, acquisitions and fluctuating market pricing. Successful mining operation in today's market for coal, minerals, ores, and aggregates demands electrical apparatus that perform every time ...
2014 / Mike Casson -
Design and Analysis of Fluid Structure Interaction in a Horizontal Micro Channel
Abstract This paper demonstrates techniques for modelling fluid-structure interactions using COMSOL Multiphysics v 4.2a, which illustrates how to solve for the flow in a continuously deforming geometry using the Arbitrary Lagrangian-Eulerian (ALE)...
2015 / K. Srinivasa Rao, K. Girija Sravani, G. Yugandhar, G. Venkateswara Rao, V.N. Mani -
Parallel pumping of electrons2009 / Ville F Maisi, Yuri A Pashkin, Sergey Kafanov, Jaw-Shen Tsai, Jukka P Pekola
-
Uniaxial Tension Simulation Using Real Microstructure-based Representative Volume Elements Model of Dual Phase Steel Plate
Abstract Dual-phase steels have become a favored material for car bodies. In this study, the deformation behavior of dual-phase steels under uniaxial tension is investigated by means of 2D Representative Volume Elements (RVE) model. The real...
2014 / Sheng Huang, ChunFeng He, Yixi Zhao, Shuhui Li, Zhongqi Yu, et al. -
Radioscintigraphy of sec-R directed CFTR gene transfer in CF mice following intranasal administration2004 /
-
Numerical Analysis of the Chemical Vapor Deposition of Polysilicon in a Trichlorosilane and Hydrogen System
Abstract The chemical vapor deposition (CVD) is an important approach to produce polycrystalline silicon for solar energy application. In this study, a model coupled with gas reactions and surface reactions has been built and simulated the...
2015 / M. Fang, Y.Y. Xiong, X.Z. Yuan, Y.W. Liu -
Astronomy Algorithm Simulation for Two Degrees of Freedom of Solar Tracking Mechanism Using Clanguage
Abstract This paper describes the use of an astronomical algorithm for two degrees of freedom of solar tracking mechanism with the result that the expected solar thermal collector panels always leads to the sun and solar energy is absorbed...
2015 / Midriem Mirdanies -
Theoretical Modeling and Experimental Verification of Mechanical Properties of Natural Fiber Reinforced Thermoplastics
Abstract Development of biocomposites has a wide interest as inexpensive and minimum environmental pollution. The present research work focused on study the mechanical properties of biocomposite using available theoretical models and experimental...
2015 / Yashwant S. Munde, Ravindra. B. Ingle -
Metal Flow in Rotary Splitting of Circular Disk
Abstract An experimental study of rotary splitting of circular disk was conducted to survey the effect of forming parametars on the metal flow in rotary spritting. It was found that the radial force F r ...
2014 / Ken-ichi Kawai, Satoshi Chaki, Yoshihiro Takayama, Yusuke Saito, Kazuhiro Ouchi, et al. -
Analysis of Friction and Burr Formation in Slot Milling
Abstract Burr formation is one of the most common and undesirable phenomenon occurring in machining operations that reduces assembly and machined part quality, and it should be avoided or at least reduced. To remove burrs, a non-value added...
2014 / Seyed Ali Niknam, Victor Songmene