Materials engineering topic list of research papers
-
Experimental Study of Diode Laser Cutting of Silicon by Means of Water Assisted Thermally Driven Separation Mechanism
Abstract A novel variant of thermal laser dicing of crystalline silicon has been studied in this paper, by using fluid assistance to improve the reliability, flexibility and operational window of the current process. High quality laser cutting of...
2013 / P. Romero, N. Otero, I. Coto, C. Leira, A. González -
Photoconductivity and photovoltaic effect in indium selenide2003 / A. Segura, J. P. Guesdon, J. M. Besson, A. Chevy
-
Sustainability Improvement in Milling Operation Through Improved Tool Design and Optimized Process Parameters-an Industrial Case Study
Abstract Current machining practice in a South-East England SME was studied over a 6 month period. This was preceded by exploratory academic research in sustainable machining and a set of short industrial observations/interviews. Preliminary...
2016 / O.O. Owodunni, D. Pinder -
Crack initiation and short crack growth in metastable austenitic stainless steel in the high cycle fatigue regime
Abstract In the present study, the influence of the deformation-induced non-diffusional phase transformation from austenite into martensite of a metastable stainless steel on the short crack growth behaviour in the high cycle fatigue regime was...
2010 / I. Roth, M. Kübbeler, U. Krupp, H.-J. Christ, C.-P. Fritzen -
(Semi)authentic audio-visual materials for the A2 level in the online language learning environment FRANEL: Pitfalls and challenges
Abstract The importance of the use of (semi)authentic audio-visual materials in electronic learning environments in general (Mayer, 2001) as well as in CALL environments (Hirschprung, 2005) has been clearly shown. There is at the same time a...
2012 / Ann-Sophie Noreillie, Viviane Grisez, Piet Desmet -
Extrusion die geometry effects on the energy absorbing properties and deformation response of 6063-type Al–Mg–Si aluminum alloy
Abstract The response of 6063-type Al–Mg–Si alloy to deformation via extrusion was studied using tool steel dies with 15°, 30°, 45°, 60° and 75° entry angles. Compressive loads were subjected to each sample using the AVERY DENISON machine, adapted...
2013 / O.P. Gbenebor, O.S.I. Fayomi, A.P.I. Popoola, A.O. Inegbenebor, F. Oyawale -
Creating the New Nanosize Membrane Reactors with Accumulated Hydrogen and Uncatalytic Hydrogenation of Decene-1 Using This Hydrogen2012 / A.P. Soldatov, M.V. Tsodikov
-
The Web Collaborative Content Organiser (Webcoco): A Conceptual Framework for System Development
Abstract This paper discusses a conceptual framework for the system development of the web collaborative content organiser (WebCoCo). The conceptual framework of the system focuses on four main elements of learning activities, namely, learning...
2013 / Hanafi Atan, Zuraidah A. Rahman, Omar Majid, Norzaini Dahlan -
Micro-structure and Mechanical Properties of Nano-TiC Reinforced Inconel 625 Deposited using LAAM
Abstract In this paper, deposition of Ni-base Inconel 625 mixed with nano-TiC powders using laser aided additive manufacturing (LAAM) was studied. Micro-structure and mechanical properties were intensively investigated. The results showed that...
2013 / G. Bi, C.N. Sun, M.L. Nai, J. Wei -
Conventional Stochastic Sequences in Reliability Assessments and Predictions of Structural Members
Abstract A simplification of probability based approaches on safety assessments and predictions of structural members is discussed. The modelling of time-dependent survival probabilities and reliability indexes of particular and single members is...
2013 / Antanas Kudzys, Ona Lukoševičienė -
Voltammetric Responses of On-Chip Glucose Oxidase Immobilized Diamond-Like Carbon Electrodes
Abstract This work reports the fabrication and electrochemical characterization of the polydimethylsiloxane (PDMS) microfluidic three-electrode cell chip utilizing diamond-like carbon (DLC) films as a working electrode for amperometric biosensing...
2012 / R. Saensak, N. Faibut, S. Porntheeraphat, B. Paosawatyanyong, V. Amornkitbamrung, et al. -
Optimal Weight Determination and Consensus Formation under Fuzzy Linguistic Environment
Abstract This paper deals with the consensus problem from the linguistic preference relations. The linguistic variables are transformed into triangular fuzzy numbers. Then an optimal consensus model is proposed to derive weights for fuzzy triangular ...
2013 / Yejun Xu, Huimin Wang -
Impact of Alternative Fuels on the Cement Manufacturing Plant Performance: An Overview
Abstract Cement manufacturing is a high energy consuming and heavy polluting process. To reduce the energy and environmental costs cement producers are currently using a blend of alternative fuels with conventional fossil fuels. Alkaline...
2013 / Azad Rahman, M.G. Rasul, M.M.K. Khan, S. Sharma -
Preparation and Gas Separation Properties of Polyphenylsulfone(PPSF)/Polyetherimide(PEI)/Silica Nanocomposite Membranes2012 / S. Deniz, S. Oksak, E. Okumus
-
Thermographic analysis and modelling of the delamination crack growth in a thermal barrier coating on Fecralloy substrate
Abstract The delamination crack growth in a plasma sprayed ZrO2 thermal barrier coating system during thermal cycling was analysed by thermography. A simplified model system was used where a Fe–Cr–Al–Y alloy (Fecralloy Eisen-Chrom™) substrate with...
2012 / Mario Schweda, Tilmann Beck, Marita Offermann, Lorenz Singheiser -
Spinning an Optimized Hollow Fiber Membrane for Desalination by Membrane Distillation using Experimental Statistical Designs2012 / M. Essalhi, L. Fernández, P. Arribas, M.C. García-Payo, M. Khayet
-
Polymer MOEMS Accelerometer
Abstract In this paper, a novel polymer MOEMS (Micro-Opto-Electro-Mechanical Systems) accelerometer is reported on. Low cost, photopatternable epoxies, EpoClad and EpoCore, are UV exposed by lithography to form this accelerometer in a simple and...
2012 / T. Guan, F. Ceyssens, R. Puers -
3D Printed Biocompatible Enclosures for an Implantable DBS Microdevice
Abstract A number of methods have been used to make electronic medical microdevices biocompatible. This paper presents a novel approach for design and fabrication of biocompatible silicone enclosures for implantable medical microdevices. The...
2015 / Scott Adams, Abbas Z. Kouzani, Mazher Mohammed, Clara Usma, Susannah J. Tye -
Metal-Organic Framework Based Membranes for Gas Separation Processes2012 / L.A. Neves, N. Barreto, J.C. Crespo, I.M. Coelhoso
-
Autogeneous Laser and Hybrid Laser Arc Welding of T-joint Low Alloy Steel with Fiber Laser Systems
Abstract This paper is focused on the welding of low alloy steels S355 and AH36 in thicknesses 6, 8 and 10mm in T-joint configuration using either autogeneous laser welding or laser-arc hybrid welding (HLAW) with high power fiber lasers. The aim was ...
2013 / A. Unt, E. Lappalainen, A. Salminen