Materials engineering topic list of research papers
-
Novel Modification of Porous Polypropylene Microfiltration Membrane Grafted Aminoethyl Methacrylate Anchored Schiff-base for Removal of Cu(II) from Aqueous Solution
Abstract Heavy metal contamination of water has gained a major attention in the world because of the malefic effects to the human beings and the environment. Copper is one of the most commonly encountered heavy metal contaminants of water. The main...
2012 / F. Farjadian, S. Schwark, M. Ulbricht -
New Process Chain for Realisation of Complex 2D/3D Weft Knitted Fabrics for Thermoplastic Composite Applications
Abstract Thermoplastic composites with a complex three-dimensional (3D) shape are attractive construction materials because of their good specific mechanical properties and their possibility to be processed very rapidly. The flat knitting technology ...
2013 / Chokri Cherif, Sybille Krzywinski, Huangmei Lin, Christian Schulz, Georg Haasemann -
An Ultra-Low-Power, Batteryless Microsystem for Wireless Sensor Networks
Abstract The capability to interact more ubiquitously with the surrounding physical world is a thriving force behind the widely ongoing research towards Wireless Sensor Networks (WSN). These sensor nodes however need to be very power efficient and...
2012 / H. Danneels, V. De Smedt, C. De Roover, S. Radiom, N. Van Helleputte, et al. -
Computational Fluid Dynamic Analysis of Coolant Flow in Turning
Abstract Application of coolant to the cutting domain is increasingly important in machining titanium alloy, nickel-base superalloy and other difficult-to-machine materials. However, the effect of coolant speed on the accessibility of coolant to the ...
2013 / Toshiyuki Obikawa, Masashi Yamaguchi -
Poly(Vinylidene Fluoride) (PVDF) and Nylon 66 (PA66) Membranes Applied the Process of Gas Separation2012 / J. Duarte, C.C. Cherubini, V. dos Santos, A. Schneider, M. Zeni
-
Flexible Nanocomposite Membrane of Bacterial Cellulose/Polyaniline2012 / M. Park, J. Cheng, S. Shin, S. Ahn, H.J. Kim, et al.
-
An optical humidity sensor based on Ag nanodendrites
Abstract Cubic Ag dendritic nanostructure with ordered branches and Ag particles have been successfully prepared by soaking pretreated Zn plate into silver ammonia ion solution at 80°C and reducing the silver ammonia ion solution with ascorbic acid...
2013 / Juncui Xu, Weixin Zhang, Zeheng Yang -
Investigation of Machinability Responses During Magnetic Field Assisted Turning Process of Preheated Mild Steel
Abstract This paper aims to investigate the effects of heat treatment and magnetic field on the machinability responses during turning process of mild steel. Investigation of machinability has been studied by considering the tool life, surface...
2013 / Md. Anayet U. Patwari, M.N. Mahmood, Shafi Noor, Md. Ziaul Haque Shovon -
Analysis of Inter-Storm Period Soil Moisture Dynamics
Abstract Soil moisture temporal dynamics is the result of the interaction between the stochastic climate forcing and the buffering effect operated by the soil volume, depending on its hydraulics properties. To address an analysis of the soi moisture ...
2013 / Elina Khaertidova, Antonia Longobardi -
Two New Preparations for Organophilic Nanofiltration Membranes Based on Photocrosslinked Polyimide2012 / S. Behnke, M. Ulbricht
-
Fouling Behavior of Silver Nanoparticels During Membrane Filtration2012 / K.W. Trzaskus, A.J.B. Kemperman, D.C. Nijmeijer
-
High Precision Surface Structuring with Ultra-Short Laser Pulses and Synchronized Mechanical Axes
Abstract For surface and 3D structuring in a 2.5D process, ultra-short pulsed laser systems are mostly used in combination with mechanical axes, whereas the mechanical axes can include electrical motor as well as beam deflecting systems like a galvo ...
2013 / B. Jaeggi, B. Neuenschwander, T. Meier, M. Zimmermann, G. Hennig -
Feasibility Study of Gas Separation Membranes for Biohydrogen Separation2012 / N. Nemestóthy, P. Bakonyi, G. Tóth, K. Bélafi-Bakó
-
A WDM Capable Integrated Optical Readout of a MEMS Sensor
Abstract We present experimental validation of an integrated readout technique for interrogating the suspension height of micro-electro-mechanical systems (MEMS) structures using a doubly clamped beam as the demonstration structure. This readout...
2012 / G. Putrino, M. Martyniuk, A. Keating, L. Faraone, J.M. Dell -
Nano-scale Hot Wire Sensors for Turbulence Measurement Applications
Abstract In this paper hot wire sensors for turbulence measurement were developed, which mainly consisted of free-standing nano-scale platinum wires. Specific spatial 3D arrangements of these sensors enable measurements of quantities of small...
2012 / Jianguo Zhao, Henning Völlm, Dara Feili, Thrassos Panidis, Helmut Seidel -
Fabrication of an Electrode Insulation Layer for Electrochemical Machining by Using hot Dip Aluminizing and Micro-arc Oxidation Method
Abstract In electrochemical machining, the machining accuracy will be affected by stray current. The most effective improvement is to coat the insulation layer on the electrode sidewall so that current can only be accurately released from the...
2016 / Jung-Chou Hung, Chih-Yang Ku, Ming-Der Ger, Zhi-Wen Fen -
Impact Analysis to Microstructure Primary Short Circuit Melted Mark under Different Heat Dissipation Condition
Abstract In the identification of fire evidence, short circuit can be identified based on the metallurgical characteristics of the melted bead from the wire short-circuit. But because of the complexity in the real fire surroundings, short circuit...
2013 / Shan-jun Mo, Fang-jie Zheng, Dong Liang, Si-yang Ling -
Polishing Titanium- and Nickel-based Alloys using Cw-Laser Radiation
Abstract Polishing of metals by remelting with laser radiation is a method for automated polishing of 3D surfaces. A thin surface layer is molten and the surface tension leads to a material flow from the peaks to the valleys. The achievable...
2013 / J. Kumstel, B. Kirsch -
Effect of periwinkles shell particle size on the wear behavior of asbestos free brake pad
Abstract The effect of periwinkle shell particle size on the wear behavior of asbestos free brake pad has been investigated. The asbestos free brake pad produced by varying the periwinkle shell particles was from +125 to +710μm with phenolic resin...
2013 / S.G. Amaren, D.S. Yawas, S.Y. Aku -
Effect of Pure and Binary Fluids on Closed Loop Pulsating Heat Pipe Thermal Performance
Abstract This paper presents preliminary experimental results on thermal performance of closed loop pulsating heat pipe (PHP) using copper tube having internal and external diameter with 2.0mm and 3.6mm respectively. For all experimentation, filling ...
2013 / Pramod R. Pachghare, Ashish M. Mahalle