Materials engineering topic list of research papers
-
A Bridge Damage Detection Approach using Train-Bridge Interaction Analysis and GA Optimization
Abstract This research is intended to establish a bridge damage detection approach employing only direct analyses of traininduced vibration by means of introducing soft computing methods. In this approach, different from identifying the structural...
2011 / X. He, M. Kawatani, T. Hayashikawa, H. Furuta, T. Matsumoto -
Design and Planning of Decentralised Production Networks Under High Product Variety Demand
Abstract In today's era of customer-driven markets, manufacturers throughout the globe realize that the efficient collaboration with their supply chain partners is amongst the most crucial factors for improved profits. The necessity to coordinate...
2012 / D. Mourtzis, M. Doukas, F. Psarommatis -
RESET Current Reduction for Phase Change Memory Based on Standard 0.13-μm CMOS Technology
Abstract In order to reduce the RESET current of phase change memory (PCM), which is fabricated using standard 0.13-μm CMOS technology, we have investigated various process factors that might affect the phase transition process, including doping...
2011 / CHEN Yifeng, SONG Zhitang, CHEN Xiaogang, LIU Bo, FENG Gaoming, et al. -
Overview on Vapor Feed Direct Methanol Fuel Cell
Abstract Direct methanol fuel cell is the best candidate in generating high energy density and compatible as power source for small mobile device. DMFC operate in two basic manners which are active and passive where methanol can be fed in liquid or...
2012 / F.A. Halim, U.A. Hasran, M.S. Masdar, S.K. Kamarudin, W.R.W. Daud -
FE-Analysis and lay-up strategies for a kiteboard
Abstract Purpose of this investgation was the development of a calculation model for designing a kiteboard. The calculation model allows a prediction, if a kiteboard design withstands an introduced loading, or if not. Using the calculation results,...
2010 / Jan Stefani, Marc Siebert -
Node-island, multi-layer self-balanced Archimedes Bridge
Abstract A preliminary structure scheme is proposed on a node-island, multi-layer self-balanced Archimedes Bridge upon which two track rails and a four-lane highway could be established. Some analysis has been made on its mechanical characteristics, ...
2010 / Youliang Xu -
UV-laser Ablation of Fibre Reinforced Composites with Ns-Pulses
Abstract Within this work the ablation behaviour of both carbon and glass fibre reinforced epoxy resin was assessed when ablated by a nanosecond-pulsed laser source emitting radiation in the ultra-violet spectrum. The investigation focussed on the...
2013 / H. Dittmar, F. Gäbler, U. Stute -
Degradation Behavior of Natural Fiber Reinforced Polymer Matrix Composites
Abstract Nowadays, polyethylene (PE) and polypropylene (PP) based plastic materials are being extensively used for commercial and household purposes. However, these polymer based plastics are substantially resistant to biodegradation. Thus their...
2013 / Takian Fakhrul, M.A. Islam -
Odor Markers Detection System for Mobile Robot Navigation
Abstract The paper presents the development of the odor markers detection system for mobile robot navigation along a chemical path. Chemical sensors are relatively slow in comparison with sensors commonly used for mobile robot navigation. To reduce...
2012 / Piotr Batog, Andrzej Wołczowski -
Comparison of bond strength of auto polymerizing, heat cure soft denture liners with denture base resin — An In Vitro study2011 / Neerja Mahajan, Kusum Datta
-
Environmentally Friendly Technological System of Cutting Using Magnetic Microcapsules and Cutting Tools with Nanoscale Composite Coating
Abstract This work presents the results of theoretical and experimental investigation into machining of various materials without the use of conventional environmental unfriendly cutting fluids while maintaining keys technological performance...
2016 / G. Naumov Alexander, A. Vereschaka Alexey, D. Batako Andre, S. Vereschaka Anatoly -
Characterization of Natural Rubber Latex Film Containing Various Enhancers
Abstract Natural rubber latex (NRL) is often used to prepare the blended films by solution-casting technique. Its film presents interesting physical properties in elasticity and adhesiveness. From the good physical properties of NRL, it can beused...
2012 / W. Simchareon, T. Amnuaikit, P. Boonme, W. Taweepreda, W. Pichayakorn -
Behçet's Aortitis – a Case Report: False Aneurysm Rupture and Aortico-duodenal Fistula2007 / H.Z. Iscan, M.K. Gol, N. Erdol, L.K. Yildiz, M. Bayazit, et al.
-
Students’ Perception of the Physical and Psychosocial Science Laboratory Environment in Malaysia: Comparison across Subject and School Location
Abstract This paper reports a survey which was conducted in order to determine students’ perception of physical and psychosocial science laboratory learning environment in secondary schools in the state of Selangor and it differences based on...
2011 / Kamisah Osman, Che Nidzam Che Ahmad, Lilia Halim -
Influence of Temperature on Surface Integrity for Typical Machining Processes in Aero Engine Manufacture
Abstract Components such as turbine discs in the high pressure turbine part of the aero engine suffer high mechanical and thermal loads during service and are critical to the safety of the aircraft. Therefore, in aero engine manufacture, the surface ...
2011 / F. Klocke, S. Gierlings, M. Brockmann, D. Veselovac -
The Mutual Information based Correlation Analysis between Fault types and Monitor Data
Abstract The fault monitor data analysis of aviation equipment is essential for the failure diagnosis and further researches. Here we propose a new approach based on Mutual Information to measure the correlation of the fault types and the data...
2011 / Huo Lin, Lv Chuan, Zhou Dong, Fei Simiao -
The investigation of the effect of simulation based teaching on the student achievement and attitude in electrostatic induction
Abstract New software have been developed in educational environments with the continuously development of technology. This software was improved teaching together with student interaction. Simulation was using effective to describe abstract concept ...
2009 / Ersen Çığrık, Remziye Ergül -
Synthesis of chiral TiO2 nanofibre with electron transition-based optical activity2012 / Shaohua Liu, Lu Han, Yingying Duan, Shunsuke Asahina, Osamu Terasaki, et al.
-
Manufacture of Cryogenic Materials used in Automotive Industry
Abstract The paper presents the manufacturing of a cryogenic special S.G. cast iron used in automotive industry. The material used was a Mo-Cr-Ni S.G. cast iron, which it was elaborated in an induction furnace. Nodular changes were obtained with the ...
2012 / Ioan Milosan -
Assessment of Preferred Learning Styles of Form Four Students from Various Schools in the State of Selangor and Federal Territory, Malaysia
Abstract This paper presents the survey results on form four secondary school students to determine the most dominant learning styles preferred by the respondents according to four dichotomous Solomon-Felder learning dimensions. The results showed...
2012 / Ruzela Tapsir, Kartina Abdul Rahman, Ahmad Saat, Kamilia Ab Wahab, Mohd Hassan Awang Boon, et al.