Materials engineering topic list of research papers
-
Preliminary Investigations on a Novel Rotating Media Liquid-air Contacting Device without Liquid Pool
Abstract Contacting device is a system that bring air and water in contact with each other in evaporative cooling systems while it brings liquid desiccant and air in contact with each other in case of liquid desiccant-based air conditioning systems. ...
2017 / Jignesh R. Mehta, Tushar K. Desai, Akshay K. Patel, Hardik B. Diyora, Akash S. Rabadiya -
Condition Monitoring and Fault Diagnosis
Abstract The paper deals with detection of fault conditions based on measurements of vibration made on rotary machines in various industries. Detection of sources of vibration will be made based on the amplitude spectra and phase relationships of...
2017 / Vladimir Dekys -
Engineering Design of a Test Device
Abstract This paper addresses the engineering design of a test device. The test device is a rack fixture. The rack fixture is designed to test hybrid drive transmission units together with an electric and a hydraulic engine with a total weight of...
2017 / Lenka Jakubovičová, Branislav Ftorek, Vladislav Baniari, Alžbeta Sapietová, Tomáš Potoček, et al. -
Modeling and Stress Analysis of a Manipulator Mounted on a Mars Rover
Abstract At the Częstochowa University of Technology a Mars rover, which is able to participate in many different kinds of competitions has been built. A manipulator is a key element of the Martian rover. It has to be multi-functional and be able to ...
2017 / Maciej Pierzgalski, Piotr Ptak, Dawid Cekus, Krzysztof Sokół -
Magnetocaloric effect in high Gd content Gd-Fe-Al based amorphous/nanocrystalline systems with enhanced Curie temperature and refrigeration capacity2016 / Linlin Zhang, Mingdong Bao, Qiang Zheng, Linhai Tian, Juan Du
-
Structural Characteristics of Hagia Sophia under Consideration of the Ribs Inside the Dome
Abstract In this study, an analytical model of Hagia Sophia, modeled by the shell and the ribs was prepared to clarify the structural characteristics of the main dome depending on the effect of displacements and stresses of the dome with and without ...
2017 / Akito Oto, Takashi Hara -
Wheat Hardness Prediction Research Based on NIR Hyperspectral Analysis Combined with Ant Colony Optimization Algorithm
Abstract This paper presents a new and improved method that ant colony optimization (ACO) algorithm is combined with the support vector regression for band selection. The method is applied to the prediction research of wheat grain hardness, and...
2017 / Hongtao Zhang, Bo Gu, Jianru Mu, Pengju Ruan, Dewei Li -
Implementation of CMOS-compatible Metamaterial Absorber for gas Sensing Application
Abstract The design of a metamaterial-based absorber for use in a mid-IR microspectrometer-based gas sensor is reported. The microspectrometer consists of a linear variable optical filter (LVOF) that is aligned with an array of thermopile detectors, ...
2017 / E. Karimi Shahmarvandi, M. Ghaderi, P. Ayerden, G. de Graaf, R.F. Wolffenbuttel -
Investigation of Ammonia Gas Sensing Properties of Graphite Oxide
Abstract In this paper a graphite oxide is investigated as a possible sensing layer of room temperature ammonia chemiresistive gas sensor. The sensing properties were tested in a wide range of ammonia concentrations in air (10-1000ppm) and under...
2017 / Alexander G. Bannov, Jan Prášek, Ondřej Jašek, Aleksandr A. Shibaev, Lenka Zajíčková -
Safety in Maintenance: An Improvement Framework
Abstract Safety in maintenance is concerned with the freedom from danger, protection from or not being exposed to the risk of harm or injury during the process of carrying out maintenance procedures. Zambian mines possess some of the world's most...
2017 / Bupe G. Mwanza, Charles Mbohwa -
Device for Control of Apertures Surface of Pipes of Oil Assortment
Abstract The article deals with problems of the defectoscopy of the pipes apertures of the oil assortment. Authors developed design of the device for measurement of the depth of the surface defect of the controlled surface. Using of the specular...
2017 / S.R. Abulhanov, S.B. Popov, N.A. Ivliev, V.V. Podlipnov -
A Study of the Effectiveness of the Use of Cement and Bottom ash Towards the Stability of Clay in Terms of UCT Value
Abstract Stabilization is one of efforts in improving the condition of soil which has less good index of properties. One example of stabilization is by adding chemicals into the soil. The chemicals commonly used are cement, lime, and asphalt. This...
2017 / Ika Puji Hastuty, Roesyanto, B.S. Jeriko -
Tribology behavior on scratch tests: Effects of yield strength2017 / Biao Feng
-
Reliability of Anisotropic Conductive Adhesive Flip Chip Attached Humidity Sensors in Prolonged Hygrothermal Exposure
Abstract Sensor components may markedly differ from typical silicon chips. Consequently, versatile attachment methods are required for their interconnections. Anisotropic conductive adhesives (ACA) are interesting materials for attachments of...
2017 / Laura Frisk, Sanna Lahokallio, Milad Mostofizadeh, Anniina Parviainen, Janne Kiilunen -
A Multi-Nozzle Electrospray Emitter for Pneumatically Assisted Electrospray in LC-MS Analysis
Abstract We present a new multi-nozzle electrospray emitter with integrated extraction electrode. Compared with existing multi-nozzle devices the electrospray process is supported by a nitrogen flow. Together with an integrated microfluidic system...
2017 / L. Kempen, R. Hartmer, A. Brekenfeld, A. Holle, W. Lang -
Fluid Impedance Model for Resonator Viscosity Sensors
Abstract Electromechanical resonators are used as viscosity sensors where the effect of the fluid loading on the resonance parameters is evaluated. A complete numerical analysis is often unrealistic due to the large computational effort. We...
2017 / Erwin K. Reichel, Thomas Voglhuber-Brunnmaier, Bernhard Jakoby -
Formation of Waste-rock Drainage Water on Massive Sulfide Deposits of the Urals (Russia)
Abstract The waste-rock stockpiles of copper pyrite mines are enriched by sulphide minerals; therefore their dissolution is the reason for the acidic waters formation. Hydrochemical processes responsible for the water quality of the formed...
2017 / P.A. Rybnikov, L.S. Rybnikova -
An Experimental Study on the Deformation Behavior of Aluminium Armour Plates Impacted by Two Different Non-deformable Projectiles
Abstract The present study describes the experimental results pertinent to the penetration of AA-2024, AA-6061 and AA-7017 plates with two different non-deformable steel projectiles. The diameters of the projectiles used for ballistic impact testing ...
2017 / P.K. Jena, S.G. Savio, K. Siva Kumar, V. Madhu, R.K. Mandal, et al. -
Preliminary Study of Inkjet Printed Sensors for Monitoring Cell Cultures
Abstract An extremely promising methodology able to obtain feedbacks from cell cultures is represented by the direct integration within culture substrates of specific sensitive elements capable to provide information related to cell adhesion,...
2017 / S. Tonello, N.F. Lopomo, M. Serpelloni, M. Serzanti, P. Dell’Era, et al. -
A Power, Economy and Space Trade-off Analysis on Passenger Vehicles Controlled with China CAFC Requirement
Abstract China released its Corporate Average Fuel Consumption (CAFC) regulation to improve fuel economy of passenger vehicles and reduce energy and environment-related risks in China. Compliance requirements and competition forces OEMs to strike a...
2017 / Dongchang Zhao, Rujie Yu, Huanhuan Ren, Wang Lv