Materials engineering topic list of research papers
-
Large Deformation Studies on Combined Shell Structures
Abstract The combinations of shell structure give discontinuity to their load path and hence play major role in load deformation behaviour of shell structures. In this paper thin metal shells are studied for combination of shell geometries for large ...
2017 / Pramod Kumar Gupta, Ram Ranjan Sahu -
Development of Steel Bridge Clattering-detecting Device Utilizing Vibration-powered Generator
Abstract When a bridge loses support from one pier due to causes such as shoe subsidence, this imbalance causes repercussions known as “clattering”. Clattering is so harmful that it may cause not only damages to shoes but also rapid extension of...
2017 / Hiroki Morii, Kenichi Kuribayashi, Toshiyuki Konishi -
Chiral tunneling in gated inversion symmetric Weyl semimetal2016 / Chunxu Bai, Yanling Yang, Kai Chang
-
Promoting Strategy of New Energy Vehicles Collaborative Innovation: The Case Study of Yutong
Abstract Based on collaborative innovation theory, the paper analyzes several more mature new energy vehicles in recent years and innovative technologies, and constructs a promoting strategic framework which is about five stages of Yutong new energy ...
2017 / Liu Jianhua, Pu Junmin, Jiang Zhaohua -
Preparation and Biosensing Performance of Porous-alumina-Assisted Gold Nanostructures on Substrates
Abstract Gold based nanosize structures such as nanoparticles and nanowires are considered as important building blocks for nanotechnology to be used for construction of sensing micro- and nanodevices because of their excellent optical, electrical...
2017 / A. Mozalev, H. Baccar, A. Abdelghani -
Luminescence properties of common salt (NaCl) available in Nigeria for use as accident dosimeter in radiological emergency situation
Abstract In the event of a radiological accident or attack, it is important to assess and quantify radiation dose to the population. This could be done using materials in the vicinity that are sensitive to ionizing radiation. Common salt (NaCl) is...
2017 / Janet Ayobami Ademola -
Comparative Characterization of P91 and 10CrMo9-10 Creep Resistant Steel Welds
Abstract P91 and 10CrMo9-10 creep resistant steels are critical to the performance of boiler tubes and power generating plants in general. Components made from these materials are mainly joined by welding. This paper reports on the comparative study ...
2017 / D.M. Madyira, J.A. Liebenberg, A. Kaymacki -
Modelling of Holographic Formation of Diffraction Structures in Photopolymerizable Compositions
Abstract In this work the theoretical model of holographic recording of one-dimensional transmission diffraction structures in photopolymerizable compositions is developed. This model is taking in to account the statistical possibility of the fact...
2017 / A.O. Semkin, S.N. Sharangovich -
Evaporation Rate of a Liquid Layer Streamlined by Gas Flow in Minichannel2016 / Evgeniya G. Orlova, Anastasia G. Islamova, Oleg A. Kabov
-
Sustainable Construction for Singapore's Urban Infrastructure – Some Research Findings
Abstract Many cities around the world can afford the old model of urban sprawl, where the city boundary grows outwards. However, in small city states like Singapore, evolving the city of the future will be very different. Singapore requires...
2017 / Khim Chye Gary Ong -
Performance of BLC-200 Cask under 9m Drop Test
Abstract BLC-200 cask is designed to carry 200 kCi Co60 sealed sources. The cask is made of stainless steel, lead and tungsten. Lead is used as primary shielding material, whereas tungsten is used in the inner periphery to make the cask compact and...
2017 / Saquib, D.K. Sahoo, P. Srivastava, A.K. Kohli, G. Ganesh -
Crystal Field Splitting is Limiting the Stability and Strength of Ultra-incompressible Orthorhombic Transition Metal Tetraborides2016 / R. F. Zhang, X. D. Wen, D. Legut, Z. H. Fu, S. Veprek, et al.
-
Circular Economy Ownership Models: A view from South Africa Industry
Abstract The world is neither globally successful in remanufacturing and re-use of products nor recycling of waste materials. This requires a combination of circular economy management systems, business models and novel technologies. There are...
2017 / Paul T. Mativenga, John Agwa-Ejon, Charles Mbohwa, Al Amin Mohamed Sultan, Norshah Aizat Shuaib -
Very Short Term Wind Speed Forecasting Using Multivariable Dense Data with WLS-MARMA Model
Abstract In this study, very short-term wind speed forecasting problem, which is quite important for the future's electricity market –wind forecasting control algorithms, is investigated. Recently, the multi-channel (spatial) methods which uses...
2017 / Tansu Filik, Ümmühan Başaran Filik -
Magnetic transition in α-NaCuPO4 with Cu-O chains2012 / Y. Wu, X. L. Dong, H. X. Yang, X. J. Wang, X. J. Huang, et al.
-
Seismic Behavior of Fiber Reinforced Steel-concrete Composite Systems
Abstract The addition of Steel Fibers (SF) to concrete has been widely studied in the past decades as a mean to control its crack behavior and maintain its ductility in tension. It has been verified that the use of these fibers at an appropriate...
2017 / Faezeh Faghih, Dipankar Das, Ashraf Ayoub -
Perpendicular magnetic anisotropy in the Heusler alloy Co2TiSi/GaAs(001) hybrid structure2015 / M. T. Dau, B. Jenichen, J. Herfort
-
Influence of Reinforcing Bar Type On Flexural Behavior of R-UHPFRC
Abstract This study conducted two tests on UHPFRC containing reinforcing bars (R-UHPFRC): a pullout test of reinforcing bars embedded in UHPFRC, and a flexural test. Both tests used deformed bars and round bars, and the pullout and flexural...
2017 / Ko Kakuma, Hiroaki Nishi, Takashi Matsumoto, Takashi Imai -
Using Concepts of Scientific Activity for Semantic Integration of Publications
Abstract In this article we formulate the position of the contextual approach to the requirements to semantic objects of scientific information integration. Terms of the scientific publication are objects. The homogeneous conceptual models are...
2017 / I.S. Pavlovskiy -
An Integrated Collaborative Platform for managing Product-service Across their Life Cycle
Abstract Product-Service System (PSS) design methodologies have been extensively researched during the past years. Various tools and methods have been established for the incorporation of sustainability and system-oriented lifecycle thinking in the...
2017 / Markos Matsas, George Pintzos, Anna Kapnia, Dimitris Mourtzis