Materials engineering topic list of research papers
-
Design of Embedded Architecture for Integrated Diagnostics in Avionics Domain
Abstract The resent paper introduces a multi-level decision-making approach for design of optimal embedded integrated diagnostic architecture that combines maintenance decisions at the k-levels of system architecture and integration with health and...
2017 / Igor Kabashkin -
Optimal Point-to-Point Trajectory Tracking of Redundant Manipulators using Generalized Pattern Search2012 / Atef A., Thi Rein
-
Research Update: Materials design of implantable nanogenerators for biomechanical energy harvesting2017 / Jun Li, Xudong Wang
-
Requirements and Tasks for Active Energy Management Systems in Automotive Industry
Abstract The “2020 climate and energy package” enacted by the EU aims to reduce emission of greenhouse gases, to increase the share of renewable energy and to improve overall energy efficiency. These goals are forwarded to the industry using...
2017 / Enrico Franz, Felix Erler, Tino Langer, Andreas Schlegel, Johannes Stoldt, et al. -
Acceleration Sensor with Self-sufficient Energy Supply
Abstract This paper describes an acceleration sensor application, which is in the position to monitor the exceedance of an acceleration limit without an external or internal energy source. For this, the sensor harvests the energy, which is necessary ...
2017 / D. Zielke, R. Schindler, T. Göstenkors -
Nickel Doped WO 3 Nanoneedles Deposited by a Single Step AACVD for Gas Sensing Applications
Abstract One-step Aerosol Assisted Chemical Vapour Deposition (AACVD) method was used for the first time to grow WO3 nanoneedles (NNs) decorated with NiO metal nanoparticles (NPs) at lower (380°C) deposition temperature. This co-deposition method is ...
2017 / Toni Vilic, Eduard Llobet -
Contribution to Sustainable Environment through Examination of Durability of Materials in an Aggressive Environment
Abstract The paper presents the results of leaching tests of concrete samples with 5 wt. % cement's replacement by fly ash and applies the statistical approach to an interpretation the results. Concrete samples with of two types of fly ashes,...
2017 / Vlasta Ondrejka Harbuľáková, Adriana Eštoková, Alena Luptáková -
Studies for Improved Damage Tolerance of Ceramics Against Ballistic Impact Using Layers
Abstract Ceramics are lightweight alternatives to metal armour. However, brittle behavior of monolithic ceramics impedes their application to armour. One approach for improving toughness of ceramics could be by using layered ceramics. In this study, ...
2017 / Kiran Akella -
Experimental investigation of the acoustic anisotropy field in the sample with a stress concentrator
Abstract The behavior of acoustic anisotropy and the longitudinal wave velocity in the case of multiaxial stress-strain state of the plate under inelastic deformation has been studied experimentally. The plate had a stress concentrator in the form...
2017 / Aleksey I. Grishchenko, Viktor S. Modestov, Vladimir A. Polyanskiy, Dmitriy A. Tretyakov, Lev V. Shtukin -
A Microchip Integrated Sensor for the Monitoring of High Concentration Photo-voltaic Solar Modules
Abstract A CMOS sensor fabricated in 0.35μm technology, specifically designed for the monitoring of High Concentration Photo-Voltaic (HCPV) modules, is presented. The microchip was designed to monitor temperature and illumination of each solar cell...
2017 / F.G. Della Corte, G. Cocorullo, P. Corsonello, C. Felini, M. Merenda, et al. -
Piezoresistive Position Microsensors with PPM Accuracy
Abstract Present work demonstrates the applicability of MEMS devices with multiple embedded flexures and sidewall piezoresistors for precise multi-Dimensional position monitoring. Particularly, applications requiring high accuracy monitoring of...
2017 / V. Stavrov, G. Stavreva, A. Shulev -
Dynamic Circuit Model for Spintronic Devices
Abstract In this work we propose a finite-difference scheme based circuit model of a general spintronic device and benchmark it with other models proposed for spintronic switching devices. Our model is based on the four-component spin circuit theory ...
2017 / Meshal Alawein, Hossein Fariborzi -
Microstructure And Mechanical Properties Of Al-WC Composites2015 / A. Simon, D. Lipusz, P. Baumli, P. Balint, G. Kaptay, et al.
-
Numerical Study on Lateral-torsional Buckling of Honeycomb Beam
Abstract A honeycomb beam is a non-prismatic wide flange beam with constant spaced hexagonal holes throughout its length. Most design codes, including Specification for Structural Steel Buildings (ANSI/AISC 360-10) do not provide provisions for...
2017 / Danny Gunawan, Bambang Suryoatmono -
Modeling of argon seeding in ASDEX Upgrade H-mode plasma with SOLPS5.0
Abstract SOLPS modeling of Ar seeding in ASDEX Upgrade H-mode plasma shows that the divertor compression of Ar increases with the seeding rate when the inner divertor is detached and the outer divertor is attached. This results from the...
2017 / L.Y. Xiang, M. Wischmeier, D. Coster, M. Bernert, H.Y. Guo, et al. -
Design and numerical analysis: Effect of core and cladding area on hybrid hexagonal microstructure optical fiber in environment pollution sensing applications
Abstract This paper presents a micro-cored Hybrid Hexagonal shape photonic crystal fiber (PCF) for the higher sensitivity response in a wide range of wavelengths ranging from 1400 to 1640 nm. Numerical investigation is carried out by applying the...
2017 / Kawsar Ahmed, Md. Shadidul Islam, Bikash Kumar Paul -
Mobile Robot Navigation Based on Q-Learning Technique2012 / Lazhar Khriji, Farid Touati, Kamel Benhmed, Amur Al-Yahmedi
-
Green's Functions of Polaritons in a Medium with Zero-mean Inhomogeneous Coupling Parameter
Abstract Dynamic susceptibilities (Green's functions) of the interacting electromagnetic waves G” e (ω) and optical phonons G” u ...
2017 / V.A. Ignatchenko, D.S. Polukhin -
Pulsed Excitation of Thermal Flow Sensors for Reduced Power Consumption and Expanded Measurement Range
Abstract This paper presents a new method of low power excitation for thermal flow sensors by driving them with voltage pulses. The impulses are generated by a capacitor circuit and can have duration of some ms or less, depending on the voltage and...
2017 / Nico Hartgenbusch, Mykhailo Borysov, Reiner Jedermann, Walter Lang -
An Alternative Method for Determining Tensile Properties of Engineered Cementitious Composites
Abstract The framework of a practical test method that can be used to provide indirect assessment of the tensile properties of ECC is presented. Particular emphasis is placed on providing the underlying concept, modelling strategy and constitutive...
2017 / Benny Suryanto, Blair Cockburn, Han Ay Lie, W. John McCarter