Materials engineering topic list of research papers
-
Emergence of reconfigurable wires and spinners via dynamic self-assembly2015 / Gasper Kokot, David Piet, George M. Whitesides, Igor S. Aranson, Alexey Snezhko
-
Embedded Control of a PMSM Servo Drive without Current Measurements
Abstract A permanent-magnet synchronous motor (PMSM) servo drive for lightweight robotic platforms that have a high torque demand at low rotational speeds has been developed. First, a current-independent torque controller is derived and cascaded...
2017 / Dino Hüllmann, Harald Kohlhoff, Patrick Neumann -
Advances in the Theory of Surface Growth with Applications to Additive Manufacturing Technologies
Abstract A vast majority of objects or solids that surround us arise from some surface growth processes. As an example, one can present many technologies in industry, including well-known technologies of crystal growth, laser deposition,...
2017 / Alexander V. Manzhirov -
Prediction Model of Spare Parts Consumption Based on Engineering Analysis Method
Abstract The consumption of spare parts is closely related to all aspects of support activities which include financing, storage and supply of equipment spare parts, and support activities are based on the law of spare parts consumption. In this...
2017 / Zhu Qian, Liu Shenyang, Huang Zhijie, Zhu Chen -
Numerical Investigations on the Impact of Hemi Spherically Tipped Projectiles on Thin Plates
Abstract Numerical investigations were carried out on 1.27mm thick 2024-O aluminum plates against hemi spherically tipped nose, steel projectiles, of 12.7mm diameter and 37.7 gram mass. Three-dimensional numerical simulations of the problem were...
2017 / K. Senthil, B. Arindam, R. Mittal, M.A. Iqbal, N.K. Gupta -
60 Years of Research in Plasticity The Contributions of Th. Lehmann and his Group
Abstract Th. Lehmann was born the 10th of August 1920 in Silesia at that time a part of Germany and died the 29th of August 1991 at Hannover. He was educated Mechanical Engineering in Breslau (now Wroclaw/Poland) and Hannover and got his doctor's...
2017 / Otto T. Bruhns -
Molecular beam epitaxy growth and magnetic properties of Cr-Co-Ga Heusler alloy films2015 / Wuwei Feng, Weihua Wang, Chenglong Zhao, Nguyen Van Quang, Sunglae Cho, et al.
-
High-Quality-Factor Photonic Crystal Ring Resonator with Applications for Gas Sensing
Abstract A design for enhancing the quality (Q) factor of a photonic crystal ring resonator (PCRR) for gas sensing in the mid infrared (MIR) region is introduced. The PCRR is based on 2D pillar type photonic crystals, which consist of a hexagonal...
2017 / R. Jannesari, C. Ranacher, C. Consani, V. Lavchiev, T. Grille, et al. -
Design Aspects of the Safe Structuring of Reinforcement in Reinforced Concrete Bending Beams
Abstract In the paper problems with safe and optimal design of reinforcement in reinforced concrete elements were presented. There were two methods considered: analytical, based on tensile forces envelope with the influence of bending moment and...
2017 / Demby Michał, Ścigałło Jacek -
Incorporating mesh-insensitive structural stress into the fatigue assessment procedure of common structural rules for bulk carriers2015 / Seong-Min Kim, Myung-Hyun Kim
-
Burr Minimisation in Face Milling with Optimised Tool Path
Abstract In current manufacturing the burr-free edges of the workpieces are required after machining. Subsequently removing the burrs from the edges of the workpieces increases the cost and time of production. This is the reason why manufacturers...
2017 / György Póka, Gyula Mátyási, István Németh -
Performance of Monolithic Plate and Layered Plates Under Blast Load
Abstract Various critical equipments are used in nuclear, defence and aerospace industries. These equipments which are used in these industries need to be strong and light in weight. Steel, aluminium and magnesium are widely used as structural...
2017 / D.K. Sahoo, Anirban Guha, Asim Tewari, R.K. Singh -
Stable Optical Oxygen Sensing Material Based on Perfluorinated Polymer and Fluorinated Platinum(II) and Palladium(II) Porphyrins
Abstract Commercially available dissolved oxygen analyzer with an optical detection method based on phosphorescence quenching was created. The sensitive element of the sensor contains a metal complex of fluorine-substituted porphyrin (platinum(II)...
2017 / N.K. Zaitsev, P.V. Melnikov, V.A. Alferov, A.V. Kopytin, K.E. German -
Modelling Strains of Soft Soils
Abstract Deformations in soft soil are generally large due to the low stiffness. This behaviour requires a large deformation continuum approach. Here the focus will be on the strength of soft soils, especially peat. Peat is modelled with an elastic...
2017 / Hans Teunissen, Cor Zwanenburg -
Microwave Position Sensor for Hydraulic Drives
Abstract The basics, design, prototype and characterization of a microwave based linear displacement sensor for piston position detection in hydraulic cylinders is presented. This function is important for industrial applications to provide a...
2017 / Albert Dorneich, Markus Fritton -
Improved Repeatability in Planar Water-gated Field Effect Transistor (WG-FET) with 16-nm-thick Single Crystalline Si Film
Abstract Repeatable operation of a water-gated field effect transistor (WG-FET) with 16-nm-thick single crystalline silicon (Si) film is reported for the first time. For devices with fluidic interface, repeatability is highly important, especially...
2017 / B.G. Sonmez, O. Ertop, S. Mutlu -
Growth rate dependence of boron incorporation into B x Ga 1−x As layers
Abstract This work provides a comprehensive study of the incorporation behavior of B in growing GaAs under molecular beam epitaxy conditions. Structural characterization of superlattices revealed a strong dependence of the BAs growth rate on the...
2017 / H. Detz, D. MacFarland, T. Zederbauer, S. Lancaster, A.M. Andrews, et al. -
Fundamental Study of Soft Actuator Using Anisotropic Gel Hybridized with Nanosheet Liquid Crystal: Analysis of Heat Characteristics and Length Control
Abstract The fundamental heat characteristics of a gel actuator that uses nanosheet liquid crystals are studied. Owing to the structural anisotropy of nanosheets, the gel actuator exhibits anisotropic thermo-induced deformation, which makes it...
2017 / Hitoshi Kino, Nattawut Samrejfuangfoo, Kazuyuki Tsuda, Tomonori Kato, Hiroyuki Fujioka, et al. -
Effects of surface roughness on scratch resistance and stress-strain fields during scratch tests2017 / Biao Feng
-
Measurement and Analysis of the Diffusible Hydrogen in Underwater Wet Welding Joint2016 / Xiangfeng Kong, Chunhu Li, Yan Zou, Jing Zhang, Yunchuan Hu, et al.