Materials engineering topic list of research papers
-
Gear Fault Diagnosis Using Dual Channel Data Fusion and EEMD Method
Abstract When a gear fault is presented, the ensemble empirical decomposition (EEMD) method has been widely used in the detection of gear fault and has given good results. However, under signals from two vibration transducers which are installed in...
2017 / Xiaoyun Gong, Lili Ding, Wenliao Du, Hongchao Wang -
Bandgap engineering of GaN nanowires2016 / Bang-Ming Ming, Ru-Zhi Wang, Chi-Yung Yam, Li-Chun Xu, Woon-Ming Lau, et al.
-
Enhanced memory characteristics in organic ferroelectric field-effect transistors through thermal annealing2015 / Ryo Sugano, Tomoya Tashiro, Tomohito Sekine, Kenjiro Fukuda, Daisuke Kumaki, et al.
-
A review of sustainable energy access and technologies for healthcare facilities in the Global South
Abstract Access to reliable, affordable and sustainable energy is essential for improving living standards, development and economic growth. From a healthcare perspective, energy is a critical parameter for delivering and improving healthcare...
2017 / Andrea Franco, Marjan Shaker, Dikolela Kalubi, Silvia Hostettler -
Analysis of Aero-engine Performance and Selection Based on Fuzzy Comprehensive Evaluation
Abstract Selecting an aero-engine which can effectively meet the design requirements of aircraft is the first step in the overall program design of aircraft. The common judgment is fuzzy. The current judgment studies of aero-engine performance often ...
2017 / Runkai Zhu, Qianchao Liang, Haiyang Zhan -
Extraction of Continuous Fiber from Mengkuang Leaves: The Influence of Process Parameters during Alkaline Treatment2014 / Muhammad Syahmi Hamizol, Puteri Sri Melor Binti Megat Yusoff, Muhamad Ridzuan Bin Abdul Latif
-
Magnetic field dependence of electrical resistivity and thermopower in Ni50Mn37Sn13 ribbons2015 / D. V. Maheswar Repaka, X. Chen, R. V. Ramanujan, R. Mahendiran
-
Optimization of wear loss in silicon nitride (Si3N4)–hexagonal boron nitride (hBN) composite using DoE–Taguchi method2016 / Sachin Ghalme, Ankush Mankar, Y. J. Bhalerao
-
Crystal structure of 4-(3,4-dimethyl-phenyl)-2-methyl-5-oxo-1,4,5,6,7,8-hexahydro-quinoline-3-carboxylic acid ethyl ester, C21H25NO32016 / Jing Meng, Yifei Dai, Feng Sui
-
Rationalisation of Austenite Transformation to Upper or Lower Bainite in Steels2015 / Z. Ławrynowicz
-
Investigation on LiBH4-CaH2 composite and its potential for thermal energy storage2017 / Yang Li, Ping Li, Xuanhui Qu
-
Heat Transfer Analysis on Finned Plate Air Heating Solar Collector for its Application in Paddy Drying
Abstract The performance of an extruded finned plate air heating solar collector is studied theoretically for paddy drying applications. Climatic conditions and solar radiation data are accounted based on Guwahati region (26.11˚N, 91.72˚E). Outlet...
2017 / T. Bhattacharyya, R. Anandalakshmi, K. Srinivasan -
Mechanics of Intelligent Materials and Structures2017 / Jie Wang, Weiqiu Chen, You-He Zhou
-
Electronic Control Fuel Injection System Based on GT-POWER and MotoTron
Abstract Build the model of LJ465Q engine by GT-POWER software and carry on the simulated operation for getting the basic fuel injection scale, then complete the work of Modeling, code generation, ECU brush writing and calibration by MotoHawk rapid...
2017 / Chaoyi Wei, Mengqi Chen, Yinjing Jiang -
Comparatively Assessing different Shapes of Lithium-ion Battery Cells
Abstract Different shapes of lithium-ion batteries (LIB) are competing as energy storages for the automobile application. The shapes can be divided into cylindrical and prismatic, whereas the prismatic shape can be further divided in regard to the...
2017 / Robert Schröder, Muhammed Aydemir, Günther Seliger -
Nondestructive Testing of Metal Parts by Using Infrared Camera
Abstract The paper deals with non-destructive testing of metal parts excited by ultrasound. Material response to this excitation is detected by infrared camera. Damages in the material, such as crakes and cavities are identified based on temperature ...
2017 / Zuzana Stankovičová, Vladimír Dekýš, František Nový, Pavol Novák -
Method of Controlling Cutting Tool Wear Based on Signal Analysis of Acoustic Emission for Milling
Abstract In this paper, a tool wear diagnostic system based on the information contained in the signal of acoustic emission (AE) is considered. In the process, experiments on milling of steel billets 1035 were carried out, with the reference values...
2017 / Vadim A. Pechenin, Alexander I. Khaimovich, Alexsandr I. Kondratiev, Michael A. Bolotov -
FEM thermal analysis of Cu/diamond/Cu and diamond/SiC heat spreaders2017 / Garuma Abdisa Denu, Jibran Hussain Mirani, Jiao Fu, Zongchen Liu, Hongxing Wang
-
Dimpled elastic sheets: a new class of non-porous negative Poisson’s ratio materials2015 / Farhad Javid, Evelyne Smith-Roberge, Matthew C. Innes, Ali Shanian, James C. Weaver, et al.
-
The Ni-Al-Hf Multiphase Diffusion2016 / J. Romanowska, B. Wierzba, J. Markowski, M. Zagula-Yavorska, J. Sieniawski